• 대한조선학회지
• /
• 제16권3호
• /
• pp.25-33
• /
• 1979

The relation between the welding conditions and welding distortions were studied with the weld parameters, current, welding speed and plate thickness, and the form of the distortions were derived theoretically. To derive these formulas, the temperature distribution on the plane normal to the direction of the weld line was assumed to be parabolic. Both the theoretical studies for the transverse shrinkage and angular distoction were compared with the experiments. The experiments were performed on the fundamental cases of a bead welds on rectangular mild steel plates. It was found that the distoction formulas were in good agreement with the results of the experiments. The formulas for the calculation of the distortion were established for the case of bead on plate weld using rectangular mild steel plate and the KS E4313, $4mm\phi$ welding rod.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.34-44
• /
• 2002

선체 외판 중 약 70% 정도가 3차원 곡면 형상으로 구성되어 있다. 이러한 3차원 형상을 자동으로 성형하기 위해서 수년간 많은 연구를 수행하여 오고 있는 실정이다. 본 연구의 목적은 가열현상을 합리적으로 대변할 수 있는 역학적 모델을 도입하여 가열 Simulator를 개발하는데 있다. 이를 위해 가열 결과에 영향을 줄 수 있는 가열 위치 ,강판의 두께, 가열 속도 등 다양한 인자로써 실험을 수행하였다. 본 연구에서 개발한 가열 Simulator의 정당성을 입증하고자 몇 가지 모델에 대해 적용하여, 실험결과와 Simulator의 추정치를 비교한 결과 만족할 만한 결과를 나타내었으며, Simulator에 적용된 이론적 배경의 합당성을 확인할 수 있었다.