• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.8-16
• /
• 2014

This paper analyzes the effects of sideslip angle(SA) on the buzz margin of supersonic intake. The buzz margin is assumed to be stabilized by a controller which generates command depending only on the longitudinal sensor measurements. The analysis is performed based on three dimensional CFD results with which the sensor measurements can be simulated. In such a control system based on the longitudinal measurements, unexpected lateral flow perturbation results in the increase in the total angle of attack(TAoA), that causes the degradation of the engine intake performance. As a consequence, it is shown that the control stability is reduced such that additional control margin needs to be secured.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.349-349
• /
• 2020

기후변화로 인한 돌발홍수와 같은 집중적인 강우현상은 노후화된 제방의 안정성 저하 및 붕괴 등을 야기시킨다. 향후 홍수량이 증가함에 따라 하천의 통수면적이 부족하여 침수 및 범람의 위험성이 증가할 것으로 생각된다. 계획규모 이상의 홍수가 발생하여 홍수위가 제방고보다 높을 때 월류에 의한 제방붕괴로 이어지며, 이러한 월류에 의한 제방붕괴는 가장 전형적인 것이다. 지금까지 월류에 의한 제방붕괴에 관한 연구는 연구자의 다양한 관점 및 방법을 통해 진행되고 있다. 실제 제방붕괴를 관측하는 것은 불가능하므로 기존의 소규모 수리실험 및 모델링을 통한 제방붕괴 메커니즘 분석에는 사실상 한계가 있다. 이러한 점에서 실규모 수리실험을 통한 월류에 의한 제방붕괴 메커니즘을 3차원으로 분석할 필요가 있다. 본 연구에서는 드론 영상을 이용하여 제방붕괴 메커니즘 분석 연구를 수행하였다. 제방은 시간의 흐름에 따라 붕괴양상이 발전한다는 점 등에서 매우 복잡한 물리적 특성이 있다. 드론의 오토촬영 기법을 통한 제방이 붕괴되는 순간을 촬영하기는 쉽지 않기 때문에 셔터스피드촬영 기법을 적용하였다. 특히, 짧은 시간에 변화되는 제방의 붕괴양상을 구체적으로 표현하기 위해 두 대의 드론을 횡·종 방향으로 동시에 비행하여 분석 시 3차원 입체감을 최대화하였다. 이후 횡·종 방향에서 동 시간대 수집된 드론 이미지를 분류하여 PIX4D 매핑 기법을 활용한 최소 정합을 통하여 드론을 활용한 제방붕괴 메커니즘 분석의 활용 가능성을 제시하였다. 향후 스마트 시대의 물산업 경쟁력을 제고함에 있어, 폭이 좁은 하천에 효율적이며 고해상도 시공간 자료를 확보할 수 있는 드론을 활용한 스마트 하천재해 예측 및 관리기술 개발을 통한 하천 원격탐사의 경쟁력을 확보하는 것이 중요하다고 사료된다.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.43-47
• /
• 2008

In order to investigate the hydrodynamic interaction between the tug-barge and bank or ship which is crossing to the opposite direction, we have executed the towing simulation of tug-barge transportation. Heading of barge, yaw moment and lateral force of tug boat are obtained by this simulation. We have analyzed the characteristics of results and propose the safety towing method for tug-barge operation.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.135-144
• /
• 2016

It is essential to lighten the weight of switch girders in order to reduce their costs of manufacturing and make it easier to use them in construction. Lightening the weight of switch is also important to the Maglev 3-way switches system, however, the design variables should be considered very carefully if lightening is to be applied to the system, because these variables are vitally related to the levitation stability. Because Urban Maglev trains have a structure in which train bogie wraps around the guiderail, the adjustment of a girder's height is a possible way to reduce the weight. The safety of the application of this concept is ensured by repeated experiments in a test bed, however, due to a lack of space and budget limits, the design parametric study for the system model can substitute for actual application. The purpose of this paper is to study the design parameters that are concerned with levitation stability while a Maglev train is running on the Maglev 3-way system depending on the weight of the switch girders. In this study, switch girder weight is reduced by adjustment of girder height and girders are and modeled as a flexible body. The effect of the adjustment of girder height on the levitation stability can be analyzed by comparing the velocity of the train when it passes the switch girders, with the lateral gap, and the levitation gap which are obtained from the co-simulation of the Maglev train's dynamics model and flexible switching system. The results of this research will be used to design a Maglev switch.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.269-275
• /
• 1997

Wind tunnel test results and their interpretations, which were performed to study the aerodynamic stability of tower of self-anchored suspension bridge, are presented in this paper. Tower and full models were tested under smooth and turbulent flow conditions. In the case of the tower with inclined two columns, the vibration due to wakes were occurred at wide velocity zone because the wakes with various frequencies were generated by inclined upstream column. It has to be emphasized that the vibration characteristics of the tower in the self-anchored suspension bridge may be very sensitive to the longitudinal boundary conditions of the girder at the supports. Because of the two natural frequency of the tower, out-of-plane bending and torsional, were not well separated, coupled motions were observed in a wide range of wind velocity. The effectiveness of corner cut, countermeasure to reduce the tower vibrations, was also studied. It has been found that 1:10, comer cut size to column width, may be the most effective ratio for reducing the vibrations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.107-117
• /
• 1998

As the traffic congestion and parking problems in urban areas are increased the tall and narrow commuter vehicles have interested as a means to increase the utilization of existing freewa- ys and parking facilities. However, in hard cornering those vehicles could reduce stability against overturning compared to conventional vehicles. This tendency can be mitigated by tilting the body toward the inside of the turn. In this paper those tilting vehicles are considered in which at speed at least, the tilt angle is controlled by steering the front wheels. In other word, if the driver turns the steering wheel the tilt controller automatically steers the road wheel to tilt the body inside of the turn. Also, the dynamic tilting vehicle model with tire slip angles is constructed by adding the roll degree of freedom. Finally, through computer simulation the behaviors of the tilting vehicles are investigated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.168-173
• /
• 2015

The flight control of aircraft, which has nonlinear time-varying dynamic characteristics depending on the various and unexpected external conditions, can be performed on two motions: longitudinal motion and lateral motion. In the longitudinal motion control of aircraft, pitch and trust are major control parameters and roll and yaw are control ones in the lateral motion control. Until now, a number of efficient and reliable control schemes that can guarantee the stability and maneuverability of the aircraft have been developed. Recently, the intelligent flight control scheme, which differs from the conventional control strategy requiring the various and complicate procedures such as the wind tunnel and environmental experiments, has attracted attention. In this paper, an intelligent longitudinal control scheme has been proposed utilizing Interval Type-2 fuzzy logic which can be recognized as a representative intelligent control methodology. The results will be verified through computer simulation with a F-4 jet fighter.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.299-310
• /
• 2017

In this work, an independent-load friction wedge model was developed using the ADAMS/View program to predict the performance of a freight vehicle with a bogie employing a 3-piece friction wedge. The friction wedge model can generate friction according to lateral and vertical directions of the bolster. The developed friction wedge model was applied to the ADAMS/Rail vehicle model, and results of the dynamic analysis showed a critical speed of 210km/h. In the linear safety analysis, it was confirmed that the lateral and vertical limit of acceleration of the vehicle were satisfied based on UIC518. In the 300R curve line, the application speed was 70km/h, which was satisfied with the limit acceleration of the car-body and bogie based on UIC518. Also, the developed model satisfied the wheel loading, lateral force and derailment coefficient of "The Regulations on Safety Standards for Railway Vehicles"

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.84-84
• /
• 2023

소하천의 유속계측을 위해 가장 많이 사용되고 있는 표면영상유속계는 표면유속을 계측하는데, 계측된 표면유속을 이용하여 유량을 산정하기 위해서는 수심 평균유속으로 변환할 필요가 있다. 이때 평균-표면유속 환산계수가 주로 사용되는데, 적정 환산계수를 산정하기 위해서는 수심별로 유속을 직접 계측하고 계측된 유속분포를 이용하여 평균-표면유속 환산계수를 산정하는 방법을 사용한다. 그러나 소하천은 홍수시 유속이 매우 빨라 물속에 직접 들어가는 것이 어렵고 장비를 이용하여 간접적인 방법으로 계측을 한다고 하더라도 소류사와 유송잡물 등으로 계측기가 파손되어 직접 계측에는 한계가 있다. 또한 직선구간 확보나 식생 등으로 부자를 이용한 계측도 어려워 계측 결과를 이용하여 환산계수를 산정하는 방법은 한계가 있다. 이런 이유로 대부분은 USGS가 제시한 0.85 ~ 0.95 범위 값 중에서 현장 여건을 고려하여 최적값을 결정·사용하고 있다. 본 연구에서는 홍수시 수심-유속분포를 직접 계측하기 어려운 소하천에서 표면영상유속계를 이용하여 계측한 수심별 표면유속분포를 이용하여 평균-표면유속 환산계수를 산정하는 방법을 개발하였다. 개발한 방법을 정량적으로 평가하기 위하여 건설기술연구원의 안동 하천실험시설에서 표면영상유속계로 수심상승에 따른 횡방향 유속분포를 계측하고 수위가 완전히 상승한 이후의 안정된 흐름 조건에서 플로우트래커를 이용하여 수심별 횡방향 유속분포를 계측하여 두 계측결과를 1:1로 비교하였다. 비교 결과 표면영상유속계로 계측한 수심별 표면유속분포와 플로우트래커로 계측한 수심-유속분포 결과는 유사한 분포를 보이는 것으로 나타나 표면영상유속계로 계측한 수심별 표면유속분포를 이용하여 평균-표면유속 환산계수를 산정하는 것이 가능하다는 결론을 도출하였다. 본 연구에서는 개발한 평균-표면유속 환산계수 산정방법의 적용성을 검토하기 위하여 표면영상유속계가 설치된 5개 시범소하천에서 7년(2016~2022)간 계측한 수심별 표면유속 자료를 수집하고 이 결과를 이용하여 평균-표면유속 환산계수를 산정하였다. 산정결과 대부분 USGS가 제시한 범위내의 값을 보이는 것으로 나타나 향후 본 연구의 개발 방법을 평균-표면유속 환산계수 산정에 활용할 수 있을 것으로 판단된다. 본 연구에서는 개발한 환산계수 산정방법은 향후 보다 많은 수리실험과 현장실험 등으로 정밀검증을 수행한다면 홍수시 수심-유속분포를 직접 계측하기 어려운 소하천에서 간편하면서도 적용성이 큰 신기술 확보가 가능할 것으로 기대된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.101-113
• /
• 2006

Arching effect occurs around the unsupported excavation surface near to tunnel face when a tunnel is excavated in a stable rock mass. If a weak fracture zone exists in front of tunnel face, a displacement occurs between tunnel face and weak fracture zone due to stress concentration. If three-dimensional absolute coordinates (longitudinal, transverse, vertical direction) is measured at tunnel face by geodetic method, the ground change in front of the tunnel face can be predicted by analysing three-dimensional absolute displacement. The purpose of this study is to verify the analysis method of three-dimensional absolute displacement by comparing the trend of displacement ratio at crown and sidewall of tunnel and the influence line/trend line of crown settlement compared with TSP results in the same section.