• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.207-221
• /
• 2016

In Korea, older pedestrian accounted for 57% of all pedestrian deaths although a ratio of older pedestrian accidents to total pedestrian accidents was only 25.9%. Though ageing population problem becomes more challenging for road safety, little is know about the behaviour of older pedestrian's behaviour. This study aimed to identify road crossing behaviour of older pedestrian at three-lane unsignalized crosswalks using video image analysis and to compare the behaviour of older pedestrian to younger one by indicators including approaching speed, the number of walking steps and other factors. The results showed that there was a difference of approaching time at kerb, waiting time at kerb, the number of glances at kerb, and the number of glances at crossing between two groups under the situation of car approaching to crosswalks. It also showed that older pedestrian usually spent 1.16 times more than younger pedestrian to walk across the crosswalk with only 84.4% of walking speed of younger pedestrian. The number of steps of older pedestrian for road crossing was 1.12 times higher with 90% shorter steps than younger pedestrian. It was concluded that older pedestrian usually decided to walk across in case of 1.67 times longer headway than younger pedestrian's decision. These results could be applied in road and facility design for better safety of older pedestrians.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.1-8
• /
• 2008

Seoul metropolitan government has introduced Bus Rapid Transit (BRT) systems in some major urban corridors on July 1st, 2004, and has reported that it was successful on the ground that bus speed has been increased in the corridors with BRT system and that it has also resulted in the increase of bus patrons. However, there comes a negative claim that BRT has increased the number of fatalities in the same corridors. This study first aims at developing safety evaluation indicators of pedestrian crossings, then compares values of those indicators from pedestrian crossings with and without BRT systems. The safety evaluation indicators of pedestrian crossing are developed as: the number (or ratio) of conflicts between pedestrians and vehicles, the number (or ratio) of vehicles violating pedestrian signals, the number (or ratio) of pedestrians remaining crossings at red signals, and the number (ratio) of pedestrians walking beyond crossing areas. When we compare values of these indicators for both pedestrian crossings with and without BRT system, it has turned out that crossings with BRT systems has more number of conflicts than the crossings without BRT systems, but it cannot be said that the ratio of conflicts will be different between two crossing types. It means that the number of conflict will increase as the number of pedestrians and vehicles in the crossings. When we note that BRT system intrinsically attract more number of pedestrians who get-in or get-off bus stops, we cannot said that BRT system will be safer for pedestrians.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.175-175
• /
• 2011

하천을 횡단하는 구조물은 흐름을 지체시켜 상 하류에 급격한 수위차를 발생시키며, 이에 동반되는 국부유속의 증가는 제방 및 하상을 세굴시킨다. 제방 및 하상 세굴은 하천횡단구조물의 구조적 안정성에 영향을 주어 불안정한 상태에 이르게 할 수 있다. 이와 같은 현상을 방지하기 위하여 하상유지시설 및 제방 보호공 등의 대책을 하천설계기준에 제시하고 있다. 하천설계기준에는 하천횡단구조물 보호시설의 종류, 설치길이 등이 명시되어 있으나, 보호공 제원 선정에 대한 구체적인 설계공식을 제시하지 않아 보완이 필요한 상황이다. 보호공 제원 선정 설계기준은 설계유속을 1차원 단면평균 유속으로 활용하는 국외의 설계공식을 활용할 수 있다. 그러나, 하천횡단구조물 주변의 흐름은 매우 복잡하므로 국외 설계공식을 그대로 적용하기에 앞서서 이에 대한 검토가 필요하다. 본 연구에서는 하천횡단구조물 주변의 흐름을 2차원 수치모형으로 재현하고 그 결과를 1차원 수치모의 결과 및 수리실험 관측결과와 비교하였다. 실험수로에 각기 다른 제원의 보호공을 설치하고 관측한 임계상태의 수리상황을 1, 2차원 수치모형으로 재현하였다. 각각의 모형에서 도출된 수리상황 결과를 비교 분석하여 보호공 제원 결정 공식을 검토하였다. 또한, 실제 하천구간에 임의의 보와 수제를 설치하고, 계획홍수량에서의 흐름특성을 비교하였다. 1, 2차원 모형에 의하여 도출된 관계를 분석함으로써, 하천횡단구조물 설계시 적용할 수 있는 보호공 제원 결정 설계공식을 제안하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.154-160
• /
• 2012

Recently, development of technologies for autonomous vehicles has been actively carried out. This paper proposes a computer vision system to recognize lanes, crosswalks, and stop lines for autonomous vehicles. This vision system first recognizes lanes required for autonomous driving using the RANSAC algorithm and the Kalman filter, and changes the viewpoint from the perspective-angle view of the street to the top-view using the fact that the lanes are parallel. Then in the reconstructed top-view image this system recognizes a crosswalk based on its geometrical characteristics and searches for a stop line within a region of interest in front of the recognized crosswalk. Experimental results show excellent performance of the proposed vision system in recognizing lanes, crosswalks, and stop lines.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.85-93
• /
• 2016

According to Traffic Accident Statistics, the fatalities of accident while crossing is over represented. So, more active safety countermeasure should be considered to reduce the frequency and degree of severity of pedestrian-crossing involved accidents. The study analyses the safety effects of the Crossing Safety Assistant System which is composed of Led-embedded crosswalk lightings, text displayer and audio waning device for the safety consciousness both pedestrian and vehicles at crosswalk area. Operating speed of vehicles is reduced with statistical significance, and the level of vigilance expressed by pedestrian head movement to check out the vehicle existence is improved.

• Journal of KIISE:Software and Applications
• /
• v.35 no.7
• /
• pp.424-430
• /
• 2008

Identifying crosscutting concerns during requirements engineering phase is one of the most essential parts in Aspect-Oriented Software Development. Considering crosscutting concerns in the earlier phase of the development improves consistency among requirements so that it can help maintain software systems efficiently and effectively. It also provides a systematic way to manage requirements changes by supporting traceability throughout the software lifecycle. Thus, identifying tangled and scattered concerns, and encapsulating them into separate entities must be addressed from the early phase of the development. To do so, first, functional and non-functional concerns must be clearly separated. Second, a pointcut where a main concern meets crosscutting concerns should be defined and specified precisely. Third, it is required to detect conflicts being occurred during composition of crosscutting concerns from the earlier phase. Therefore, this paper proposes a systematic approach to identifying and specifying crosscutting concerns using goal-scenario based requirements analysis. And we demonstrate the applicability of the approach by applying it into the intelligent service robot system.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.67-85
• /
• 2009

The Trans-Central Asian Railway consists of the Trans-Caspian Railroad, the Kazalinsk Route, the Turk-Sib, and the Trans-Kazakhstan Trunk Line. Currently, one-fifth of the residents in Central Asia are living around these railroads on which 70% of the economic activities in the region depends. The construction of the railroads in Central Asia was motivated by the Russian Empire's competition 'with its maritime rival, the United Kingdom, over the Eurasian heartland in a geostrategic sense. Using the railroads, the Russian Empire aspired to connect its central industrial regions in European Russia with the remote frontier areas in the Central Asian republics and to increase economic specialization of the region. After the breakdown of the USSR, however, the rail network, which had well been linked among the regions in the former Soviet nations, has been in a deteriorated linkage with their non-Soviet neighboring nations. Despite a lot of problems to be solved, the Trans-Central Asian rail network is expected to play a crucial role as a land bridge between East Asia and Europe as well as between Russia/the Baltic sea and the Indian Ocean/the Persian Gulf in the long-term.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.103-111
• /
• 2003

This study proposes methodology deterimining a basic pedestrian crossing capacity that plays a critical role in the installation of pedestrian signal at the crosswalks. The methodology is based on the pattern of vehicle arrived at the crosswalks. Erlang distribuion is used as headway distribution that can cover the various levels of flow rate. Models using Erlang distribution are represented by Erlang parameter (K) of 1, 2, or 3 at 2-, 4-, or 6-lane roadway in both directions. In addition, this study considered the only type of road with a pedestrian refuge area in the median that is used to wait for the allowable gap provided by the flow of another direction. As a result, the pedestrian capacity decreases as flow rate increases and Erlang parameter increases for the road with the pedestrian refuge. This study develops the models to determine the pedestrian capacity under a variety of flow rates and the outcomes of this study could be used as the criteria for the determination of the installation of pedestrian signal or for the provision of pedestrian refuge in the median of road.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.23-35
• /
• 2011

The pedestrian green time is usually long at wide width intersections. This sometimes causes the increase of delay on the whole intersection because of long cycle length and thus small g/C ratio on some direction. In this paper, to improve these problems, staggered pedestrian crossing was evaluated on the vehicular and pedestrian aspects. The results were gained by using both TRANSYT-7F and VISSIM model. The vehicle control delay of the staggered pedestrian crossing was estimated to be decreasing than that of the general pedestrian crossing by 14.9% to 85.6%. The pedestrian average delay of two pedestrian crossing systems was examined by analytical method and VISSIM. According to the analytical method there was no significant difference between each pedestrian crossing system. The pedestrian delay of staggered pedestrian crossing was from 13.4% to 22.3% than the general pedestrian crossing by VISSIM. In conclusion, the staggered pedestrian crossing was more effective than general pedestrian crossing for both the vehicle and the pedestrian. However this conclusion was resulted from micro simulation where traffic volume condition, v/c, was from 0.8 to 1.1.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.77-89
• /
• 2008

The bikes are conflicted with the cars and the pedestrian at the intersection and the road with the bike crossing. To establish the bike signal at this section is one method to solve this conflict. According to the survey for the bike road status and the biker's characters which are crossing the road at the intersection, the bike crossing are established with beside the pedestrian crossing and most of the bikers are crossing the street by the pedestrian signal. Also, the bike queue which is waiting the signal change at the stop line was cleared before the closing the pedestrian signal. Considering the result of this survey, TOUCAN crossing signal type in England for bike signal at the place where the bike crossing are established with beside the pedestrian crossing, in which bike rider and pedestrian can cross by the pedestrian signal operation, is suggested. However, at the place where the bike crossing is apart from the pedestrian crossing, the bike signal which is connected to the vehicle signal is suggested. All these types of bike signals can be accepted for the present bike crossing equipments and the biker's characters and be adapted to the police standard traffic signal controller by adjusting the signal time only without any function change.