• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.186.2-186.2
• /
• 2010

풍력발전기의 구성요소 중 브레이드는 바람의 운동에너지를 회전력으로 변환하는 핵심요소이며, 효율적인 설계기법이 절실히 요구되는데 선진국에서는 설계기술을 회피하는 실정으로 브레이드 형상 설계기법의 확보는 어려운 실정이다. 본 논문은 날개요소 운동량이론(BEMT) 및 X-foil을 이용하여 10kW급 브레이드 국산화 개발에 목적을 두고 공기역학적 설계를 수행하여 국내 풍황에 적합한 최적의 풍력발전기 에어포일을 개발하는데 목적을 두고 그 방안을 제시한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.278-284
• /
• 2006

In thispaper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.99-107
• /
• 1991

In the course of ship basic design, the redesign works to avoid resonance can be carried out efficiently provided that the frequency sensitivities of the baseline system is available. In this paper, for lower modes of ship's hull vibrations, a practical method to predict the natural frequency sensitivities to major design variables subject to considerations at the preliminary design stage is presented. The method is of derivation based on frequency sensitivities of uniform Timoshenko beams eguivalent to actual ships.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.67-76
• /
• 2002

This thesis aims at the study of the receiving part of wireless modem for Mobitex, which are designed for two way massage services by using the network of wireless packet. This receiving part has the features of GMSK demodulation by using Gaussian filter, which has the co-amplitude in a better condition and narrowness bandwidth and high performance in BER, compared with existing MSK modulation. In case of BT=0.3, we designed this receiving part to reduce RF output power spectrum at received data of symbol demodulation and avoid inter symbol interference(ISI) so that we can apply this part to Mobitex network which are currently in service for wireless modem in domestic.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.325-326
• /
• 2022

본 연구에서는 자율운항선박이 항만시설 중 정박구역이나 정박지를 항행하는 과정에서 정박 및 묘박 중인 선박들과의 예기치 못한 충돌 사고를 예방하며 안전하게 항행하기 위한 경로 생성 연구를 수행하고 있다. 정박구역과 같은 고밀집 영역 내 정박 또는 묘박 중인 선박들의 안전을 고려하여 자율운항선박의 경로를 생성하는 알고리즘을 설계하는 과정에서 필수적으로 고려되어야 하는 핵심 요소들을 식별하였다. 또한, 식별된 핵심 요소들을 알고리즘에 반영함과 동시에 자율운항선박의 항해 지원 적용 가능성을 검증하기 위한 알고리즘의 프레임워크를 설계하였다. 프레임워크 내 각 모듈별 관계와 모듈별 입출력 정보의 흐름을 체계화하였으며, 모듈들의 기능적 요소를 포함한 주요 성능을 검증하고자 모의 환경 구축을 위한 요소 모듈들을 식별하였다. 이를 기반으로 고밀집 영역 내에서 충돌을 회피하기 위한 경로 생성 알고리즘의 설계 방향성을 제안하였다.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.226-231
• /
• 2016

Researching and developing mobile robot are quite important. Autonomous driving of mobile robot is important in various working environment. For its autonomous driving, mobile robot detects obstacles and avoids them. Purpose of this thesis is to analyze kinematics model of the mobile robot and show the efficiency of type-2 fuzzy self-tuning PID controller used for controling steering angle. Type-2 fuzzy is more flexible in verbal expression than type-1 fuzzy because it has multiple values unlike previous one. To compare these two controllers, this paper conduct a simulation by using MATLAB Simulink. The result shows the capability of type-2 fuzzy self-tuning PID is effective.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.169-175
• /
• 2016

There are many researches to develop robots that improve its mobility and task planning to adapt in various uneven environments. In this paper, we propose the design method and task planning of quadruped robot which can have top-bottom docking structure. The proposed quadruped robot is designed to adjust leg length using linear actuators and perform top-bottom docking and undocking using octagonal cone shaped docking module. Also, to stable walking and information gathering in the various environments, a geomagnetic sensor, PSD sensor, LRF sensor and camera. We propose an obstacle avoidance method and the topbottom docking algorithm of the two quadruped robots using linear actuator. The robot can overcome obstacles using adjusting leg length and activate the top-bottom docking function. The top-bottom docking robots of two quadruped robot can walk 4 legged walking and 6 legged walking, and use 4 arms or 2 arms the upper. We verified that the docking robots can carry objects using 4 leg of the upper robot.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.7-13
• /
• 2017

This study will provide a practical plan of engineering education through the study of major activities connected with the production of works to accomplish the graduation conditions by completing the comprehensive design subject and the result of the performance. The designed subject is to measure the minimum safety distance during driving using the obstacle detection function of the ultrasonic sensor and to perform the avoidance algorithm based on the measurement value of the acceleration gyro sensor. It is proposed an access surveillance system that minimizes the damage of drones, surrounding objects, and people, and improves air mobility. Experimental results show that the obstacles around the drone are detected by five ultrasonic sensors and the difference of output value is applied to each motor of the drone and obstacle avoidance is confirmed. In addition, the content and level of the data for measuring the achievement of learning achievement in the engineering education certification program were used and the results were confirmed to be consistent with the description of the engineering problem level required for the graduates of 4-year engineering college.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.327-336
• /
• 2004

For visual inspection system in real industrial environment, it is one of most important tasks to design fast and stable pattern matching algorithm. This paper presents an edge-based point correlation algorithm avoiding full search in visual inspection system. Conventional algorithms based on NGC(normalized gray-level correlation) have to overcome some difficulties for applying to automated inspection system in factory environment. First of all, NGC algorithms need high time complexity and thus high performance hardware to satisfy real-time process. In addition, lighting condition in realistic factory environments if not stable and therefore intensity variation from uncontrolled lights gives many roubles for applying directly NGC as pattern matching algorithm in this paper, we propose an algorithm to solve these problems from using thinned and binarized edge data and skipping full point search with edge-map analysis. A point correlation algorithm with the thinned edges is introduced with image pyramid technique to reduce the time complexity. Matching edges instead of using original gray-level pixel data overcomes NGC problems and pyramid of edges also provides fast and stable processing. All proposed methods are preyed from experiments using real images.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.240-257
• /
• 2022

Autonomous vehicles use various local sensors such as camera, radar, and lidar to perceive the surrounding environment. However, it is difficult to predict the movement of vulnerable road users using only local sensors that are subject to limits in cognitive range. This is true especially when these users are blocked from view by obstacles. Hence, this paper developed an algorithm for collision avoidance with VRU using V2X information. The main purpose of this collision avoidance system is to overcome the limitations of the local sensors. The algorithm first evaluates the risk of collision, based on the current driving condition and the V2X information of the VRU. Subsequently, the algorithm takes one of four evasive actions; steering, braking, steering after braking, and braking after steering. A simulation was performed under various conditions. The results of the simulation confirmed that the algorithm could significantly improve the performance of the collision avoidance system while securing vehicle stability during evasive maneuvers.