• Title/Summary/Keyword: 회절 현상

Search Result 317, Processing Time 0.026 seconds

Non-Destructive Measurement of Residual Stresses at the Interfaces of Composites (복합 재료 계면의 잔류 응력 측정을 위한 비파괴 평가 기술)

  • 정용무
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.179-189
    • /
    • 1996
  • X-선 회절법에 의하여 Graphite 화이버-알루미늄 매트릭스 복합 재료 계면에서의 잔류 응력을 정량적으로 측정하였다. X-선 회절법으로 측정한 잔류 응력 값과 수치 해석 모델 계산 결과와 비교하였다. 모델 계산 결과보다 낮은 측정 결과를 얻었으며 이는 매트릭스의 응력 이완 또는 화이버의 basal palne sliding 현상에 기인한 것으로 추정된다.

  • PDF

A Study of the cis - trans Rotational Isomeric Relaxation in Methyl Acetate (광회절 초음파 공명법에 의한 methyl acetate의 회전이성 완화의 연구)

  • Bae Jong-Rim
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.171-174
    • /
    • 1999
  • Methyl acetate의 초음파 흡수측정을 0.2-10MHz의 주파수 범위, 은도 5-30에 걸쳐 광회절 초음파 공명법을 사용하여 행하였다. 그 결과, cis와 trans에 의한 완화는 단일 완화현상을 보였고 그 스책트럼으로 부터 완화 주파수와 완화강도를 결정하였다. 완화 주파수의 온도 의존성으로부터 활성화 에너지(${\Delta}H^{#}$)=6.6 kcal/mol을, 완화강도의 온도 의존성에서 엔탈피차(${\Delta}H$)=3.4 kcal/mol을 각각 구하였다.

  • PDF

조석조건에서 불규칙파의 변이

  • 유동훈;강찬수
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1998.09a
    • /
    • pp.36-39
    • /
    • 1998
  • 불규칙파를 스펙트럼파로 파악하여 조석 조건하 천해역에서 천수, 굴절, 회절, 마찰 및 쇄파 등에 의하여 불규칙파가 변이하는 현상을 해석하였다. 지배방정식은 에너지보존식과 파수백타보존식인데 파수벡타보존식에 회절효과를 고려하는 항을 포함하였다. 스텍트럼형상을 재현하기 위하여는 선형누적법을 사용하였으며, 스펙트럼파에 대한 대표 마찰계수를 간단히 산정하는 약산식을 사용하여 마찰손실효과를 고려하였다. (중략)

  • PDF

Noise Source Localization using 3 Dimensional Spherical Probe (3 차원 구형탐촉자를 이용한 소음원 탐지)

  • Na, H.S.;Kim, Y.G.;Choi, K.Y.;Patrat, J.C.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2000.06a
    • /
    • pp.1704-1709
    • /
    • 2000
  • This paper proposes a spherical probe allowing acoustic intensity measurements in three dimensions to be made, which creates a diffracted field that is well-defined, thanks to analytic solution of diffraction phenomena. Six microphones are distributed on the surface of the sphere along three rectangular axes. Its measurement technique is not based on finite difference approximation, as is the case for the ID probe but on the analytic solution of diffraction phenomena. In fact, the success of sound source identification depends on the inverse models used to estimate inverse diffraction phenomena, which has non-linear properties. In this paper, we introduce the concept of nonlinear inverse diffraction modeling using a neural network and the idea of 3 dimensional sound source identification with several tests.

  • PDF

Super-RENS Readout Signal Simulation (Super-RENS 재생 신호 계산)

  • Lee, Jin-Kyung;Hwang, In-Oh;Kim, Hyun-Ki;Bae, Jae-Cheol;Kim, Joo-Ho
    • Transactions of the Society of Information Storage Systems
    • /
    • v.3 no.1
    • /
    • pp.34-39
    • /
    • 2007
  • Super-REsolution Near-field Structure (Super-RENS) 재생 현상을 모델링하고 재생 신호를 계산하여 실험 결과와 비교하였다. 약 2mW 내외의 높은 광 파워로 집광된 Spot 은 디스크 내의 상변화 물질인 GST 를 용융시키므로 집광 Spot 내에는 용융 영역과 비 용융 영역이 공존하게 되고 연속적 또는 불연속적인 경계를 이루게 된다. 이러한 열 효과로부터 기인하는 집광 Spot 내에서의 물질의 광학적 특성 변화와 변화 정도의 차이를 가정하였고 변화된 광학적 특성은 집광된 Spot 의 유효 크기를 줄어들게 함으로써 회절한계 이하의 정보를 재생 가능하게 한다. 계산은 FDTD 방법과 Scalar 방법을 병행하였다. FDTD 방법으로는 위와 같은 집광 Spot 내의 물질 굴절률 (n,k) 변화로부터 회절한계 이하의 정보가 재생 가능함과 CNR 문턱 현상을 확인하였고, Scalar 방법으로는 물질 굴절률을 직접 다루지 않고 굴절률 변화로부터 기인하는 광의 Amplitude 와 Phase 변화로부터 회절한계 이하의 정보가 재생 가능함을 확인하였다. 이 때 광의 Amplitude 와 Phase 변화를 모델링하기 위하여 지름, 위치, 반사율 변화량, 위상 변화량의 네가지 변수로 정의되는 광 마스크를 도입하였다. Scalar 방법을 이용하여 재생 RF 신호 등 다양한 Super-RENS 디스크의 신호를 계산 활용 할 수 있고 다음의 두가지 광학계에 대하여 계산과 실험으로 얻은 채널 특성 및 RF 신호를 비교하여 각각 오차평균 4.2%, 4.7%로 일치함을 확인하였다. 파장 659nm, NA=0.6, Min Pit Length=173nm ROM 디스크 System, 파장 405nm, NA=0.85 Min Mark Length=75nm WORM 디스크 System.

  • PDF

Design and Analysis of an Optical System for an Uncooled Thermal-imaging Camera Using a Hybrid Lens (Hybrid 렌즈를 이용한 비냉각 열상장비 광학계 설계 및 분석)

  • Ok, Chang-Min;Kong, Hyun-Bae;Park, Hyun-Woo
    • Korean Journal of Optics and Photonics
    • /
    • v.28 no.5
    • /
    • pp.241-249
    • /
    • 2017
  • This paper presents the design and evaluation of the optical system for an uncooled thermal-imaging camera. The operating wavelength range of this system is from $7.7{\mu}m$ to $12.8{\mu}m$. Through optimization, we have obtained a LWIR (Long Wave Infrared) optical system with a focal length of 5.44 mm, which consists of four aspheric surfaces and two diffractive surfaces. The f-number of the optical system is F/1.2, and its field of view is $90^{\circ}{\times}67.5^{\circ}$. The hybrid lens was used to balance the higher-order aberrations, and its diffraction properties were evaluated by scalar diffraction theory. We calculated the polychromatic integrated diffraction efficiency, and the MTF drop generated by background noise. We have evaluated the thermal compensation of a LWIR fixed optical system, which is optically passively athermalized to maintain MTF performance in the focal depth. In conclusion, these design results are useful for an uncooled thermal-imaging camera.

On the Errors of the Phased Beam Tracing Method for the Room Acoustic Analysis (실내음향 해석을 위한 위상 빔 추적법의 사용시 오차에 관하여)

  • Jeong, Cheol-Ho;Ih, Jeong-Guon
    • The Journal of the Acoustical Society of Korea
    • /
    • v.27 no.1
    • /
    • pp.1-11
    • /
    • 2008
  • To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

Implementation of the holographic diffuser for beam expending in the output plane (출력 평면에서 빔 확산을 위한 홀로그래픽 디퓨저의 구현)

  • Choi, Kyung-Sik;Yoon, Jin-Sun;Kim, Nam;Choi, Yoon-Sun;Choi, Byung-So
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.08a
    • /
    • pp.238-239
    • /
    • 2000
  • 페이지 지향 데이터의 고밀도 홀로그래픽 데이터 저장 시스템이나 홀로그래피 현상에서 필름에 기록되는 스펙트럼을 평탄화하기 위해 확산 광원의 사용은 필수적이다. 또한, 출력 평면에서 균일한 분포를 갖는 회절 빔의 세기 분포와 회절 격자로서의 높은 회절 효율, 홀로그램 손상 시 재생 가능한 용장성 (redundancy)의 증가를 위해 간유리나 특정 패턴들로 인코딩된 유사 랜덤 디퓨저가 이용되고 있으나, 이들은 무한한 공간 대역폭을 갖기 때문에 공간적으로 유한한 데이터 마스크만이 이용되거나 기록 매질이 임의의 크기로 제한된다면, 입사 광원의 전력 낭비와 균일도 측면에서 비효율적이고, 여러 단계의 제작과정이 필요한 단점을 가지고 있다.$^{(1-3)}$ (중략)

  • PDF