• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.81-86
• /
• 2004

Between rolling airframe missile and swirling propulsion jet passing through convergent-divergent nozzle of the rocket motor, occur exchanges of angular momentum which result in the increase of roll speed of the missile. This phenomena in called jet roll damping. In the study jet roll damping was formulated from conservation equation of angular momentum. And the maximum value of the jet roll damping of KPSAM was estimated with assumed swirl velocity distribution at nozzle exit and compared with result of computation of axisymmetric compressible turbulent nozzle flow.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.166-188
• /
• 1998

본 논문에서는 쿼터니온 궤환 개념이 기존의 오일러각 궤환 개념에 비해 추력벡터제어(Thrust Vector Control) 방식을 사용하는 전술 유도탄 자세제어에 보다 효과적으로 적용될 수 있음을 보인다. 오일러각 궤환 방식을 택한 기존의 자세제어기에서 오일러각 궤환 부분을 쿼터니온 궤환으로 적절히 바꾸어 주게 되면 자세명령 크기 변화에 따른 시간응답 특성의 변화를 줄일 수 있으며, 쿼터니온 궤환 방식을 택할 경우, 우주비행체 자세제어 분야에서 활발히 연구되고 있는 고유축(Eigen Axis) 회전에 의한 자세변환을 수행할 수 있는 자세제어기 설계가 가능하다. 고유축 회전은 최단경로에 의한 자세변환 개념이므로, 이러한 능력을 갖춘 자세제어기는 신속한 자세변환이 필요한 전술 유도탄의 초기비행에 매우 효과적으로 이용될 수 있다. 더욱이, 제어법칙에 공력모멘트를 보상하는 항을 추가하게 되면 변화가 심한 공력 모멘트가 유도탄의 회전운동에 미치는 영향을 줄일 수 있어 고유축 회전성능을 보다 개선시킬 수 있다. 우선, 오일러각 궤환보다 쿼터니온 궤환이 유리한 점을 논하고, 쿼터니온 궤환에 근거한 자세제어기의 설계 개념과 제안된 제어기에 의해 구성되는 폐루우프에 대한 안정성 문제를 다룬 후, 시뮬레이션을 통해 그 타당성을 검증한다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.500-506
• /
• 2018

In this paper, we considered the one-shot alignment using master inertial navigation system (MINS) and slave inertial navigation system (SINS) in the missile to find the exact posture of a missile. In order to perform one-shot alignment, the tilt angle between MINS and SINS must be obtained, which can be compensated by obtaining the tilt angle between missile round and SINS. The tilt angle was calculated by using the roll rotation of missile round, jig for rotating the missile round and interface structure to measure the horizontal state by using a horizontal angle meter were constructed. As a result of the tilt angle save (TAS) inspection, the tilt angle ${\alpha}$, ${\beta}$, ${\gamma}$ is normal range and it is possible to perform one-shot alignment by compensating this value.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.159-162
• /
• 2007

뉴테이션(Nutation, 장동)은 자이로스코프와 같은 큰 축 대칭 물체의 회전축에 대해 작은 불규칙적인(어원적으로 "nodding") 운동이다. 위성체가 회전상태에 돌입하게 될 때 위성체가 순수한 회전 운동이 아닌 뉴테이션 운동을 일으킬 경우, 이를 제거하기 위하여 뉴테이션댐퍼(NutationDamper)를 사용한다. 유도탄에 들어가는 부품 중에서 자이로조립체 내에 들어 있는 뉴테이션댐퍼의 개발을 하고자 본 연구를 수행 하게 되었으며, 자이로조립체 내에서 뉴테이션댐퍼의 역할은 자이로조립체의 원주상에 환형 튜브 형상으로 장착되어 자이로조립체가 세차운동(Precession)을 할 때 부가적으로 수반되는 바람직하지 못한 떨림(Wobble motion)인 뉴테이션을 감쇠시키는 기능을 수행한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.89-99
• /
• 2014

This paper presents the experimental torque disturbance analysis of a missile hatch system by spline backlash. The missile hatch system uses a spline and gear train for vertical elevation of the heavy hatch. The spline used for the rotation shaft of the hatch is generally used for automotive driving parts that transmit high amounts of power. It has an angular backlash, which results in jerks. Backlash of the hatch spline influences hatch swinging. The spline backlash and hatch swing are experimentally analyzed by measuring the hatch's rotation angle and acceleration. Hatch swing is visually observable for a short period, and it is measured by measuring the rotation angle variation and hatch acceleration. The shape of fluctuation and duration time of hatch angle variation are similar to those of torque. This shows that the hatch swing due to spline backlash generates torque disturbances.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.35-45
• /
• 2006

RIn this paper. we describe real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed according to the design requirements of mathematic model, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer. and graphic user interface program resided in host computer. The real-time computer consists of six TI C-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to use the real-time parallel processing simulator developed here as a performance analysis equipment for rolling missiles, we perform verification test through experimental results in the field.

• Journal of the Korea Society for Simulation
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2017

6-DOF flight simulation program is most generally used M&S tool in domestic missile development procedure. The 6-DOF M&S method, however, cannot validate the performance of a imaging seeker-adopted missile in various conditions. A M&S tool for the analysis of the integrated-flight simulation is required since the tracking performance of the imaging seeker is highly dependent on the missile maneuvering, which introduces the displacement and rotation of the target in the seeker imagery. Through the development of the $3^{rd}$ generation anti-tank missile, Raybolt, the integrated-flight M&S tool was developed and applied to the missile configuration design. It integrates synthetic image generation S/W, imaging tracker, and flight simulation program and computes the main system performance criteria, hit probability by Monte-Carlo Simulation. In this paper, the issues in the $3^{rd}$ generation anti-tank missile configuration and the integrated-flight M&S method and results are described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.3
• /
• pp.187-194
• /
• 2019

The off-axis Infra-Red(IR) seeker is mounted on the nose cone side of the anti-air high speed missile to alleviate thermal shield effect due to aerodynamic heating. The seeker output can not be regarded as the Line-of-Sight(LOS) rate any more as missile's roll motion to keep the target tracking is associated. In this paper, we propose a method to calculate the LOS rate for off-axis seeker on a 2-axis gimbal. Firstly, true LOS rate equations are analytically derived but not implementable because boresight error rate is not measurable. And then the first order lag approximation to obtain boresight error rate is proposed. The proposed LOS rate calculation method can compensate the coupling effect by considering the rotations of missile and gimbal. The performance of the proposed method is verified via full nonlinear 6-DOF(Degree of Freedom) simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.102-107
• /
• 1996

It is difficult to analyze the high speed rolling missile with the generally used missile body fixed coordinates. In this study, we formulate the dynamic equations of the high speed rolling missile with the principal axis of inertia, and make the analytical model of one axis steering missile using pitch/yaw symmetry and complex summation method. With this model we analyze the control characteristics and propose the design considerations of high speed rolling missile with one axis control fin using PNG law in conjuntion with a seeker signal.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.176-184
• /
• 2007

The missile for this study has shown different natural frequency characteristics depending on the test conditions; natural frequencies obtained from its flight test are higher than those in its ground test. It was found that the hinged joints connecting front airframe to rear one had the nonlinear stiffness and caused the missile to show very complex dynamic characteristics. The angular stiffness at hinged joints was calculated using 3D finite element analysis, and it was verified that there was a highly nonlinear relationship between angular stiffness and external load. Natural frequencies calculated considering the nonlinearity of angular stiffness were nearly the same as test results. Through this study, the dynamic characteristics of a missile having split airframes with hinged joints could be clearly identified and a way of maintaining its natural frequencies consistent was generated.