• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.625-627
• /
• 2000

최근 실시간 가상 인물 애니메이션 시스템이 활발하게 보급되면서 피부모양을 자연스럽게 유지하면서도 고속으로 동작할 수 있는 인체 변형 방법이 요구되고 있다. 본 논문은 가상 인물을 구성하는 메쉬의 정점들을 회전 연산만으로 이동시켜 실시간에 인체를 변형하는 모델을 제안한다. 인체 변형의 처리과정으로 드로니 삼각화를 이용하여 각 정점의 회전 기준이 될 관절을 찾는 방법을 제시하고, 사원수 형태로 입력된 동작을 회전축의 방향에 따라 분해한 후 각 정점에 차등적으로 적용하여 피부를 자연스럽게 변형할 수 있음을 보인다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.97-97
• /
• 2004

본 연구에서 대상으로 하는 회전형 세정수 제어시스템은 비데용으로 사용되는 것으로, 크게 스테핑 모터부와 스테핑 모터에 의해서 구동되는 회전형 셀렉터부로 나눌 수 있으며, 셀렉터부는 비데, 일반세정, 국부세정, 건조의 4가지의 기능을 수행하는 구조로 되어있다. Fig. 1에 보이는 구조에서 상부셀렉터(upper selector)는 하부셀렉터(base selector)와 내부 자석사이에 위치해 있으며, 스테핑 모터의 초기 설정된 입력펄수 수에 비례하여 회전운동을 하고 해당 분사지점에 위치하게 된다.(중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3A
• /
• pp.251-258
• /
• 2009

This paper deals with the strongest beams with the solid regular polygon cross-section, whose volumes are always held constant. The differential equation of the elastic deflection curve of such beam subjected to the concentrated and trapezoidal distributed loads are derived and solved by using the double integration method. The Simpson's formula was used to numerically integrate the differential equation. In the numerical examples, the clamped-clamped and clamped-hinged ends are considered as the end constraints and the linear, parabolic and sinusoidal tapers are considered as the shape function of cross sectional depth. As the numerical results, the configurations, i.e. section ratios, of the strongest beams are determined by reading the section ratios from the numerical data obtained in this study, under which static maximum behaviors become to be minimum.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.133-139
• /
• 1996

In this paper, an approximate method is developed to obtain the natural frequencies of the out of plane vibration of circular curved beams. The governing differential equations are derived using the dynamic equilibrium equations with the Timoshenko theory, and solved numerically. The Runge-Kutta method and Regula-Falsi method are used to integrate the differential equations and to determine the natural frequencies, respectively. In numerical examples, the hinged-hinged and clamped-clamped end constraints are considered. For each case, the four lowest natural frequencies are reported as functions of four non-dimensional system parameters.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.145-146
• /
• 2010

A moment redistribution method was developed for earthquake design of reinforced concrete moment-resisting frames. For a frame designed with strong column-weak beam, the moment redistribution mechanism was investigated. Based on the result, the relationship between redistributed moment and plastic rotation in plastic hinges was established. By using the relationship, we developed a method for the evaluation of plastic rotations during the moment redistribution, addressing the effects of various design parameters including member stiffness, load condition, and plastic mechanism of structure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.441-447
• /
• 2013

Purpose: The present study was conducted to investigate the axial rotations of toric soft lens during the change of lens wearer's posture, and the relationship between its rotation and corneal astigmatism. Methods: The amount, direction, and speed of toric soft contact lens rotation were measured for 42 eyes (aged 20s) with the rule astigmatism in the straight and lying postures, and it compared between their changes according to corneal astigmatism. Results: There was no significant difference in the axial rotation of lens for the astigmatism prescription between the straight and lying postures. However, the rotation angle was significantly different according to the posture of lens wearer. Rotating directions in straight posture were nasal direction for 20 eyes and temporal direction for 22 eyes. In lying posture, lenses of most wearers were rotated to a direction of lying posture, and the initial rotating speed was very fast in initial wearing for -0.75 D toric lenses, but consistency for -1.25 D toric lenses. The rotation angle in lying posture showed significantly different according to the amount of corneal astigmatism, the lens speed was also significantly different according to the wearing time but not the amount of corneal astigmatism. Conclusions: The axial rotation of toric soft lens was different by the lens wearer's posture and its amount was the greater with the higher degree of corneal astigmatism. Thus, these factors should be considered for the development of toric lens design.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.617-624
• /
• 2008

Well-designed steel moment connections will undergo local buckling before they exhaust their available rotation capacity, and inelastic post-buckling deformation plays a major role in defining the connection rotation capacity. An approximate analytical method to model strength degradation and failure of beam plastic hinges due to local buckling and estimation of the seismic rotation capacity of fully restrained beam-column connections in special steel moment-resisting frames under both monotonic and cyclic loading conditions is proposed in this study. This method is based on the plastic mechanism and a yield line plastic hinge (YLPH) model whose geometry is determined using the shapes of the buckled plastic hinges observed in experiments. The proposed YLPH model was developed for the improved WUF-W and RBS connections and validated in comparison with experimental data. The effects of the beam section geometric parameters on the rotation capacity were discussed in the companion paper (parametric studies).

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.280-285
• /
• 2010

Purpose: Coracoid impingement syndrome refers to subscapularis impingement between the coracoid process and lesser tuberosity of the humerus, and pain may occur when the arm is positioned in forward flexion, internal rotation and adduction. This position is common for archers. Material and methods: A female archer with coracoid impingement syndrome that was uncontrolled by conservative therapy underwent arthroscopic subcoracoid decompression. At the 20th postoperative month of follow up, she complained of painful rotator interval widening and so she underwent arthroscopic rotator interval plication. Results: At the postoperative 6th month of follow up after the second operation, she showed no pain and good functional results, and she returned to competing as an archer. Conclusion: We have reported here on a case of successful treatment of painful rotator widening after subcoracoid decompression in an elite archer.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.715-723
• /
• 2001

This paper represents the behavior of CFT column to H-beam full-scale connection with external T-stiffener. 6 specimens whose T-stiffeners which are compounded of vertical element and horizontal element were made under the parameter of the strength ratio of each elements(vertical element and horizontal element in T-stiffener) to the beam full plastic moment. The analysis-parameters demonstrated in the base of the data that we get in experiment are strength stiffness, and plastic rotational capacity. All of specimen showed stable hysteretic behavior, and the horizontal element is more critical than vertical element in strength and stiffness. The mean beam plastic rotation of all specimen except the TS-2 specimen is 2.97% rad.