• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.994-999
• /
• 2003

A modeling method for the modal analysis of a rotating cross-ply composite beam based on Timoshenko beam theory is presented. To analyze the composite beam exactly, the effects of shear deformation and rotary inertia are included. Linear differential equations of motion are derived using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion. The effects of the dimensionless angular velocity and the slenderness ratio parameter on the variations of modal characteristics are investigated

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1022-1028
• /
• 2000

This paper presents a modeling method for the vibration analysis of rotating cantilever beams considering the elastic foundation effect. Mass and stiffness matrices are derided explicitly by considering coupling effect between stretching and bonding motion. Numerical results show that the bending direction elastic foundation stiffness influences the vibration characteristics significantly in practical range of beam configuration. The ranges of elastic foundation stiffness to avoid the dynamic buckling are also presented. The method presented in this paper can be used to predict the variations of natural frequencies of rotating cantilever beams with elastically restrained root.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.843-844
• /
• 2006

자기 기록 시스템이 더 높은 기록 밀도를 가지려면 기록 미디어에 더 작은 공간을 가지는 비트를 기록할 수 있어야 한다. 이를 가능하게 하기 위해서는 더 작은 비트를 보존 할 수 있는 고 보자력 기록 미디어와 이를 기록할 수 있는 자기 기록 헤드가 있어야 한다. 자기 기록 시스템에서 기록 밀도와 함께 중요시 되는 것이 바로 기록 속도이다. 시스템이 발전 할 수록 요구되는 속도 또한 높아지고 있다. 기록 속도가 빨라지려면 기록 주파수가 높아지고 기록 미디어의 회전 속도가 빨라져야 한다. 자기 기록 헤드는 자화되어 있는 고 보자력 기록 미디어 위를 빠른 속도로 직선 운동하고 있는 형태가 되고 이로 인하여 자기 기록 헤드에 와전류가 발생하게 된다. 발생되는 와전류의 형태는 기록 미디어에 자화된 형태에 따라 달라질 것이고 또한 자기 기록 미디어의 회전 속도와 와전류가 발생되는 기록 헤드의 전기전도도에 따라 변화 된다. 본 연구는 이렇게 발생된 와전류를 3차원 유한요소법을 이용하여 분석한 수 이 와전류가 기록 필드에 미치는 영향을 분석하여 제시 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2516-2523
• /
• 1996

The equations of motion for rotating contilever beams with a concentrated mass loated in an arbitrary position are derived. For the modeling of the concentrated mass the Dirac delta function is used for the mass density function. Parametric studies are performed with five dimensionless variables ; natural frequencies, angular velocity, hub radius, concentrated mass, and the mass location. The concentrated mass, whereverit may locate, lowers the natural frequencies of a stationaly beam. However, when the beam rotates, the natural frequencies(if they increase or decrease) are dictated by the location of the concentrated mass.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2015

Purpose: It was investigated whether two different stabilization designs of toric contact lenses changed the rotational axis and degree of toric lenses according to body posture and gaze direction in the present study. Methods: Toric soft contact lenses with Lo-Torque$^{TM}$ design and ASD design (accelerated stabilized design) were fitted on 52 eyes aged in 20s-30s. Then, rotational degree was measured at the five gaze directions including front gaze and the lying position. Results: When gazing the front and vertical directions in the upright posture, lens was much rotated to nasal side for the Lo-Torque$^{TM}$ design and temporal side for the ASD design. When gazing horizontal direction, both design lenses were rotated against to the gaze direction. Rotation degree was the smallest at superior direction gaze and the largest at nasal gaze. In case of the rotation degree less than $5^{\circ}$, Lo-Torque$^{TM}$ design was more frequent when gazing front and vertical directions, and ASD design was more frequent when gazing horizontal direction. In addition, the lens with Lo-Torque$^{TM}$ design was lesser rotation degree than with ASD design immediately after lying. On the other hand, the lens with ASD design was lesser rotation degree than with Lo-Torque$^{TM}$ design 1 minute later after lying. Conclusions: This study confirmed that axis rotation of the lens induced by gaze direction and posture was different according to axis stabilization design during wearing toric soft contact lens.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.98-101
• /
• 2004

본 논문에서는 XYS영상 정규화와 XSR 영상 정규화에 기반을 둔 영상사형정보예측 방법을 제안한다. 실험을 통하여 XYS영상 정규화와 XRS 영상 정규화에 기반을 둔 영상사형정보예측 방법을 보이고 XYS 방식의 의한 사형정보예측방법이 더 우수함을 보인다. 또한 플리핑 및 회전과 수평 수직 비 정보를 원래영상과 감지된 영상의 중앙모멘트로 표시될 수 있음을 보인다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.560-561
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.608-609
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.84-85
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.498-499
• /
• 2013