• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.487-497
• /
• 2011

Numerical analysis has been performed to investigate the rotor speed and pitch range variations when the airspeed is increased in autorotation. Transient Simulation Method(TSM) was used to obtain the steady states of autorotation. The rotor blade was analyzed by the two-dimensional compressible Navier-Stokes solver in order to adapt to the airspeed increase and the results were used in the transient simulation method. Meanwhile, the Pitt/Peters inflow theory was used to supply the induced velocity fields. For the prescribed torque equilibrium state, the combinations of velocity, shaft angle, and pitch angle were produced to investigate the rotor speeds and variable ranges. The rotor tip Mach number and rotor speed were correlated and the trim range of pitch angle was observed with respect to the shaft angle decrease.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2008

We present the precise visual measurement method of rotational displacements using two different moire fringes simultaneously generated by repeated sinusoidal gratings. We investigate the variation of moire fringes depending on rotational displacements through computer simulation and experiment using a rotator in detail. The moire fringes are composed of the wide linear fringe part with a long period and the narrow linear fringe part with a short period. These parts are superior to the angle detection of more than 12 degrees and less than 12 degree, respectively. Additionally, the method can be visually used in the determination of the rotational direction by observing the moire fringe's direction.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.234-243
• /
• 2006

The recent rapid development of HCI and surveillance technologies has brought great interests in application systems to process faces. Much of research efforts in these systems has been primarily focused on such areas as face recognition, facial expression analysis and facial feature extraction. However, not many approaches have been reported toward face direction detection. This paper proposes a method to detect the direction of a face using a facial feature called facial triangle, which is formed by two eyebrows and the lower lip. Specifically, based on the single monocular view of the face, the proposed method introduces very simple formulas to estimate the horizontal or vertical rotation angle of the face. The horizontal rotation angle can be calculated by using a ratio between the areas of left and right facial triangles, while the vertical angle can be obtained from a ratio between the base and height of facial triangle. Experimental results showed that our method makes it possible to obtain the horizontal angle within an error tolerance of ${\pm}1.68^{\circ}$, and that it performs better as the magnitude of the vertical rotation angle increases.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.81-94
• /
• 2012

Several methods which utilize the phase of Zernike moments (ZMs) to estimate the rotation angle have shown good performance in terms of accuracy. In this paper, we provides the performance comparison results of the existing rotation angle estimation methods based on ZMs and propose an extension of Revaud et al.'s method [1] which utilizes the phase of ZMs; the proposed method uses angular radial transform coefficients instead of ZMs and yields better performance than the ZMs based methods in terms of accuracy. A set of ART can describe angular variation of image more intensively than ZMs, it enables more accurate estimation of the rotation angle than ZMs. In the experiments, the proposed method outperforms ZMs based method. Comparisons were made in terms of the root mean square error vs. the coverage on MPEG-7 shape dataset.

• Geophysics and Geophysical Exploration
• /
• v.23 no.2
• /
• pp.89-96
• /
• 2020

This tutorial summarizes the coordinate transforms for formulating geophysical problems. To ensure mathematical consistency, this discussion begins with the right-hand rule. Further, the concepts of active and passive transforms are introduced. By extending these concepts, the coordinate transform and its inverse between two coordinates are related to the matrix transpose. The yaw-pitch-roll rotation and the azimuth-deviation-tool face rotation transforms are described as the most frequently used schemes, and the relation between the Rodrigues' rotation formula and these two transforms are mathematically explained. The "Gimbal Lock" problem inherent in yaw-pitch-roll rotation is schematically presented and mathematically derived. As a useful tool overcome this problem, the principle and usage of the quaternion is also described.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.699-704
• /
• 2006

본 논문은 회전 및 천이불변 이미지 텍스처 검색의 새로운 방식을 소개한다. 주파수 영역의 극좌표계에서 동일한 공간 주파수에서 각도 방향으로 투영을 하는 각도 투영법을 제안하며, 제안된 각도 투영법을 이용하여 주파수 영역에서 푸리에 계수이 합과 표준편차를 특징벡터로 이용한다. 각도 투영법을 쉽게 구현하기 위해 극좌표계에서 라돈변환이 수행된다. 실험 시 MPEG-7 데이터를 이용하였으며 그 결과는 여러 텍스처 이미지를 검색하는데 있어서 특징을 잘 구별해 내는 결과를 보여준다. 또한 제안된 회전 및 천이불변 특징 추출 알고리듬은 등방성 텍스처나 국부적인 방향성을 보이는 텍스처 영상 검색에도 효율적인 검색률을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.601-603
• /
• 2002

MRI 스캔중 촬상 대상물의 화강평면내에서의 회전은 MRI 신호에 위상오차와 불균일 표본화를 일으킨다. 따라서, 아티팩트가 포함된 MR 화상의 화질열화를 개선하기 위하여 다음과 같은 방법들을 제안한다. 우선, 미리 주어진 회전파라메타써 쌍일처 보간과 중첩 특성을 이용해서 k 공간 불균일 표본화 데이터를 수정하는 알고리즘과, 2차원 회전운동의 회전각은 이미 알려져 있고, 회전중심 위치가 미지인 경우에 대해 위상보정에 기초한 아티팩트를 보정하는 알고리즘 및 회전중심과 각도가 모두 미지인 2차원 회전운동에 대해 아티팩느를 보정하는 알고리즘을 제안한다. 이 때, 미지운동 파라메타를 예측하기 위해 찰상대상물의 경계바깥쪽에서 이상적인 MR 화상의 에너지는 최소가 되고, 활상 대상물의 회전이 존재할 때 측정된 에너지가 증가한다는 성질을 이용했다. 이러만 성질을 이용해서 시뮬레이션 화상에 적용한 결과 제안한 방법에 대한 유효성을 확인하였다.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1341-1348
• /
• 2012

In this paper, an efficient scheme for correcting rotated objects in medical images using the Mojette transform is presented. The Mojette transform is a kind of discrete Radon transform, where the transform domain is represented by a set of projections. The Mojette transform currently studied in the image compression area is modified for detecting the rotation angle of objects in medical images. First, in order to find accurate rotation angle, the projection value in the Mojette transform is determined by using pixels on the projection line and in addition the linear interpolation of pixels adjacent to the line. Second, at each projection angle, only one projection is implemented for reducing the amount of the calculation in the process of the Mojette transform. Finally, the projection in the Mojette transform is carried out at the predetermined ROI(Region Of Interest) at which the objects are not cropped or added by rotating the image. The simulation results show that the proposed method has good performance for correcting the rotation angle in medical images.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.409-418
• /
• 1988

Steam turbines, gas turbines, multistage centrifugal compressors are operated over the range of the first critical speed. In these rotors flexible rotor balancing technique is necessary. In such balancing, influence coefficients are measured by rotating a rotor with trial weight. But for the large rotor, the measurement of influence coefficient takes much time and it reduces the cost efficiency. In this paper the new influence coefficient with rotation of rotor is proposed. First the theoretical background of the method is presented and it is applied to the simple flexible rotor model. Then the experiments are performed and the results of presented method are compared with those of analytical method. By using the obtained influence coefficient, balancing of the flexible rotor is performed.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.353-355
• /
• 2002

지금까지 회전운동을 선형운동으로 만들기 위해 많은 연구가 되어 실제장치의 특허는 1980년대부터 볼 수 있으나 분명한 이론적 근거가 없었다. 회전운동을 선형운동으로 만들기 위한 방법 중 한 가지를 소개한다. 회전중심의 팔에 관성질량이 달려 있으면 회전중심으로 회전 중 각 가속도를 강제로 제어발생시 작용 반작용에 의해서 관성질량에 순간 질량중심이 발생한다. 그 결과 계 전체의 질량중심에 순간회전 변위가 발생한다. 계의 질량중심의 회전변위를 한 방향이 되도록 각가속도를 적절히 제어하면 선형 선형적인 펄스 운동을 얻을 수 있다. 기존 실제 장치들의 운동특성을 참조하여 회전중심 과 순간질량 중심 및 계의 질량중심 관계의 모델을 세우고 수식 및 이론을 정의하여 해석한다.