• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.25-38
• /
• 2013

Future wireless systems will be required to support the increasingly nomadic lifestyle of people. This support will be provided through the use of multiple overlaid networks which have very different characteristics. Moreover, these networks will be required to support the seamless delivery of today's popular desktop services, such as web browsing, interactive multimedia and video conferencing to the mobile devices. Thus one of the major challenges in the design of these mobile systems will be the provision of the quality of service (QoS) guarantees that the applications demand under this diverse networking infrastructure. We believe that it is necessary to use resource reservation and adaptation techniques to deliver these QoS guarantee to applications. However, reservation and pre-configuration in the entire service region is overly aggressive, and results in schemes that are extremely inefficient and unreliable. To overcome this, the mobility pattern of a user can be exploited. If the movement of a user is known, the reservation and configuration procedure can be limited to the regions of the network a user is likely to visit. Our proposed Proxy-UMP is not sensitive to increase of the search cost than other schemes and shows that the increasing rate of total cost is low as the SMR increases.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.93-100
• /
• 2016

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces were investigated: Kerator (pink, blue, red) and O-ring (orange, red). Two implant fixtures were vertically embedded in base mountings. Five pairs of each attachment were evaluated. A universal testing machine was used to evaluate the retentive force of two attachments during wear simulation. Surface characteristics of each attachment system were evaluated with scanning electron microscopy. Five pairs of each attachment were evaluated. Kerator pink showed the highest initial retention. After 2,500 cycles of wear-simulation, Kerator pink noted the largest decrease in retention. According to results of surface analysis, Worn surfaces were obtained in matrices and patrices. Heavy wears were observed in matrices. After 2 year-wear simulation, most attachments exhibited retention loss. Attachments using different kind of material exhibited dissimilar surface alterations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.618-619
• /
• 2010

LED는 기존의 발광원에 비해 훨씬 높은 파워와 효율성으로 인해 최근 들어 각종 조명이나 교통신호 등에서 사용이 급증하고 있다. LED 재료를 위해 지금까지 여러가지가 연구되어 왔는데, 갈륨 질화물 (Gallium Nitride, GaN)에 기반한 시스템이 최근들어 가장 큰 관심을 받고 있다. GaN 방식은 열적으로 매우 안정성이 있고, 1.9 ~ 6.2 eV 범위의 넓은 밴드의 Gap, 그리고 인듐이나 알루미늄과 결합하여 청, 녹, 백색등의 다양한 빛을 발생할 수 있는 장점을 가지고 있다. 예를 들어 청색 LED는 광학 방식의 기록매체에, 백색 LED는 기존의 조명램프의 대체용으로 활용이 가능하다. 이러한 장점 덕분에 GaN기반 LED 시장은 1994년에 최초로 상용화 된 이래 최근 급격한 성장을 보여 왔다. 그러나 GaN은 다른 III~V 타입의 반도체 재료와는 달리 재료가 성장하기 위해 사파이어와 같은 별도의 기판을 필요로 하는 문제가 있다. 이것은 결국 전위발생과 같은 격자의 부조화 같은 문제를 야기하여 결국 LED의 성능을 떨어뜨리는 요인이 된다. 이러한 문제를 해결하기 위해 HVPE(Hydride Vapor Phase Epitaxy) 방법이 개발되었는데, 이 방법은 시간당 100 미크론의 매우 빠른 성장속도로 높은 두께의 레이어를 만드는 장점이 있다. 이렇게 성장된 GaN 레이어는 베이스 기판에서 쉽게 분리되어 활용이 가능하다. 그러나 HVPE 기술은 성장 공정에서 두께를 균일하게 만들도록 제어하는 것이 매우 어렵다는 문제가 있다. 따라서 HVPE 방식에서는 이러한 조건을 만족시키기 위해 반응현상에 대한 물리적 해석을 토대로 공정조건을 정밀하게 설계해야 한다. 이를 위해 최근에 실험 또는 시뮬레이션을 활용하여 이러한 공정조건을 향상시키기 위한 여러 연구가 진행되었다. 본 연구에서는 이러한 연구의 일환으로 반응로에 투입되는 여러 기체의 유량과 존별 주변온도 조건을 입력변수로 하고, 이들이 GaN 성장에 미치는 영향을 분석하였다. HVPE 시스템에서 가장 이상적인 목표는 반응기체가 층류유동을 유지하면서 대부분의 반응이 기판위에서 이뤄지며, 기판위에서 성장되는 재료의 두께가 균일하게 되는 것이다. 입력변수들이 이러한 결과에 어떠한 영향을 미치는 지 분석하기 위해 전산유체역학(CFD, Computational Fluid Dynamics)을 수행하는 상용코드 FLUENT를 사용하였다. 보다 실제에 가까운 해석을 위해서는 기체간의 화학반응을 포함해야 하나, 해석의 편의와 효율을 위해 본 연구에서는 열 및 유동해석만을 수행하였다. 한편 실제 반응로의 우수성은 성장속도와 두께분포의 균일도를 통해 평가된다. CFD 해석을 통해 이들을 분석하기 위해 기존에 수행한 실험조건을 해석하고 해석결과의 유동패턴/압력분포를 실험결과의 성장속도/두께분포와 비교하고, 이중에서 관련성이 높은 해석결과변수를 우수성 평가에 활용하였다. 기존의 실험결과를 토대로 이러한 중요 결과변수와 함께 이들에 대한 목표값이 도출되고 나면, 입력 공정조건 - 사용기체의 유량과 주변온도 조건 - 에 대해 실험계획(DOE,Design of Experiment)을 수립하고 목표성능을 구현하기 위한 최적설계를 수행할 수 있다. 일반적으로 CFD를 통해 최적의 설계나 공정조건을 탐색하는 작업은 1회의 CFD 계산시간이 매우 오래 소요되기 때문에 쉽지 않다. 그러나 본 연구에서는 CFD와 DOE의 적절한 조합을 통해 적은 수의 해석을 가지고도 원하는 결과를 효율적으로 얻는 것이 가능함을 입증하고자 한다. 본 발표에서는 아직 이러한 연구가 완성되지 않은 시점에서 제반 연구개요를 소개하고 현 시점까지의 연구 결과 및 향후 계획을 소개하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.815-815
• /
• 2012

우리나라의 경우 1조원 이상 피해를 입힌 자연재해가 '98년 이후 집중적으로 발생하는 등 최근 급격한 도시화 산업화 및 범지구적인 이상기후 현상으로 자연재해로 인한 피해가 점차 대형화 다양화되는 추세이다. 그에 따른 국내 재해관리 및 사전예방의 중요성은 그 동안 여러 차례 기획사업 및 재정계획을 통해 제시된 바 있으나, 대부분 추진계획 수립에 그치고 실질적인 예산 편성시에는 충분히 반연되지 못한 실정이다. 따라서 본 연구에서는 우리나라의 재해예방투자사업의 규모와 구체적 계획에 대하여 살펴보고자 한다. 재해사전예방 분야의 기존 투자계획으로는 "제1차 국가안전관리 5개년 기본계획"과 "2005-2009 국가재정운용계획", "수해방지대책 백서" 등이 있었으며 그 중 "제1차 국가안전관리 5개년 기본계획"은 정부역사상 처음으로 시행하는 중 장기 국가재난관리정책으로, 풍수해대책, 설해대책 등의 자연재해를 비롯하여 총 17개의 재난유형별 재난관리대책을 포괄하고 있으며, 11개 부처 및 시도에 대해 27개 사업, 36조 8천억원을 투자하는 계획을 제시하였다. 가장 최근에는 2010년 8월에 국무총리실 주도 재난관리 개선 민관합동 TF팀을 구성하여 기후변화 및 기상이변에 선제적 대응 및 기존 방재체계에 대한 근본 패러다임 전환을 통한 선진적 방재시스템 구축을 추진하기 위하여 기후변화대응 재난관리 개선 종합대책을 마련하였다. 일선 경험이 많은 민간전문가 주도로 철저히 현장 중심의 문제점과 대안을 검토하고 대책을 준비함으로서 기존의 재난관리대책 구축방법과 차별성을 띄었다고 할 수 있다. 이번 재난관리 개선 종합대책에서는 5개 시 도의 현장조사와 기존대책을 분석하고, 전문가 의견 등을 검토하여 도시유역종합치수계획, 소하천 및 사방댐 정비, 소규모 시설 정비 등 26건을 포함한 '99년부터 3회에 걸쳐 추진한 재해관련 범정부 종합대책을 검토하여 필요성이 있으나 추진이 미흡했던 과제는 포함시켰다. 또한 기후변화 대응에 필요한 신규과제 및 재해취약요인이 드러난 도시방재를 위한 개선과제를 집중 검토하도록 하였다. 다수부처 관련 쟁점과제에 대해서는 주관부처를 정하거나 민간 전문가가 참여하는 조정회의 및 세미나, 공청회를 통해 보완 검토하였다. 그 결과로서 2011년 전년대비 재해예방 관련 사업에 대한 국고 투자규모는 도시침수방지 17%, 수자원 관리 25%, 항만 정비 17%, 산사태 예방 24%, 농업기반시설 정비 20%, 위험지 정비 19%, 재난 예측 및 대응시스템 개선 16% 증가하여 투자계획이 수립되었으며 전체적으로는 약 21% 증가된 투자계획이 수립되었다.

• Informatization Policy
• /
• v.28 no.3
• /
• pp.49-72
• /
• 2021

This study analyzes the major content, significances, and future outlook of Three Data Acts amendment enacted in August 2020 in South Korea, with the focus on their impact on the financial and data industries. It seems that the revision of the Credit Information Act will enable the specification of a business which had previously only been regulated as the business of credit inquiry, and also enable the domestic data industry to activate the MyData industry, data trading and platforms, and specify data pseudonymization and trading procedures. For the rational and efficient implementation of the amendments to the Three Data Acts, the Personal Information Protection Committee must be as transparent and lawful in its activities as possible, and fairness must be guaranteed. Even in the utilization of personal information, the development or complementation of the related data processing technologies is essential, and clear data processing methods and areas must be regulated. Furthermore, the amendments must be supported with guarantees and the systematization of a fair competitive system in the data market, stricter regulations on penalties for illegal acts related to data, establishment and strengthening of the related security systems, and reinforcement of the system of cooperation for data transfer.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.504-513
• /
• 2021

Different physical processes, according to the atmospheric boundary layer types, were used in the Local Data Assimilation and Prediction System (LDAPS) of the Unified Model (UM) used by the Korea Meteorological Administration (KMA). Therefore, it is important to verify the atmospheric boundary layer types in the numerical model to improve the accuracy of the models performance. In this study, the atmospheric boundary layer types were verified using observational data. To classify the atmospheric boundary layer types, summer intensive observation data from radiosonde, flux observation instruments, Doppler wind Light Detection and Ranging(LIDAR) and ceilometer were used. A total number of 201 observation data points were analyzed over the course 61 days from June 18 to August 17, 2019. The most frequent types of differences between LDAPS and observed data were type 1 in LDAPS and type 2 in observed(each 53 times). And type 3 difference was observed in LDAPS and type 5 and 6 were observed 24 and 15 times, respectively. It was because of the simulation performance of the Cloud Physics such as that associated with the simulation of decoupled stratocumulus and cumulus cloud. Therefore, to improve the numerical model, cloud physics aspects should be considered in the atmospheric boundary layer type classification.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.361-371
• /
• 2019

In 2017, the ratio of the number of victims and deaths in the construction industry was the highest with 25.2% and 29.6%, respectively. Especially, as safety accidents at construction sites continue to increase, the economic loss is greatly increased too. Therefore, in order to prevent safety accidents in the construction work, the safety risk assessment index by type of construction was developed, and the main results of this study are as follows. First, 17 factors related to safety accidents at construction sites were derived through survey and interview survey, and this study suggested 9 items(process, type of construction, progress rate, contract amount, number of floors, safety education, working days and weather) throughout the expert advisory meeting. Second, the risk assessment index for safety accidents was developed based on the ratio and intensity of safety accidents. Third, to verify the risk assessment model, the construction safety risk assessment index by type of construction was derived by surveying and analyzing the statistics of the construction accident. In addition, the risk strength was calculated by dividing human damage caused by construction safety accidents into those killed and injured. The risk assessment index based on the frequency and intensity of safety accidents by type of construction is expected to be utilized as basic data when assessing the risk of similar projects in the future.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.93-103
• /
• 2021

S&OP(Sales and Operations Planning) is an ongoing process of periodic planning, reviewing, and evaluation through the involvement of all key stakeholders. Within this process, performance is regularly reviewed and early warning signals are generated, so that the company can react quickly to changing market and operational environment. This paper presents a framework for effective S&OP for fair alignment, accountability, teamwork, visibility, and risk management. This framework focuses on supply chain information governance, level of information sharing through S&OP, role of S&OP as coordination mechanism, APS effectivesness as a planning tool and SCM performance. In addition, a brief case study on the operating characteristics of S&OP at three Korean firms is presented. Implications of the study finding are also provided. It will also make companies that are considering the introduction of S&OP aware of the importance of S&OP, which will provide practical guidelines for the introduction of S&OP.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.14-25
• /
• 2020

This research proposes a methodology to evaluate the rationality of passengers' route choice who make trips within Seoul metropolitan subway based on smart card data. The rationality of user route choice is divided into the degree of determinacy and similarity concepts as basic principle. Determinacy is the degree to which the route selected by the passenger is identical to the system optimal path. Similarity indicates the degree to which the route is similar to the system optimal path. The K-path search method is used for path enumeration, which allows for measurement of determinacy. To assess determinacy within similarity, transfer tag data of private operators is used. Consequently, the concept of similarity applied to the model is such that the passenger's path choice is identical to the path taken using the tag reader. Results show that the determinacy of appearance of the shortest path (K=1) is 90.4%, while the similarity of appearance as K=(2-10) is 7.9%, summing to 98.3%. This indicates that trips on the metropolitan subway network are being rationally explained. 1.7% of irrational trips are attributed to the unexplainable error term that occurs due to the diversity of passengers.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1733-1741
• /
• 2020

This study analyzed the effect of meteorological factors on the concentration of PM10 (particulate matter 10) in the atmosphere and the variation of rainwater quality using multivariate statistical analysis. The concentration of PM10 in the atmosphere was continuously measured during eleven precipitation events with a custom-built PM sensor node. A total of 183 rainwater samples were analyzed for pH, EC (electrical conductivity), and water-soluble cations (Na+, Mg2+, K+, Ca2+, NH4+) and anions (Cl-, NO3-, SO42-). The data has been analyzed using two multivariate statistical techniques (principal component analysis, PCA, and Pearson correlation analysis) to identify relationships among PM10 concentrations in the atmosphere, meteorological factors, and rainwater quality factors. When the rainfall intensity was relatively strong (> 5 mm/h, rainfall type 1), the PM10 concentration in the atmosphere showed a negative correlation (r = -0.55, p < 0.05) with cumulative rainfall. The PM10 concentration increased the concentration of water-soluble ions (r = 0.25) and EC (r = 0.4), and decreased the pH (r = -0.7) of rainwater samples. However, for rainfall type 2 (< 5 mm/h), there was no negative correlation between the PM10 concentration in the atmosphere and cumulative rainfall and no statistically significant correlation between the PM10 concentration in the atmosphere and rainwater quality.