• Composites Research
• /
• v.14 no.3
• /
• pp.69-76
• /
• 2001

This paper proposes a double cantilever sandwich-beam method fur evaluating the frequency dependence of dynamic characteristics of rubbers. The flexural vibration of a double cantilever sandwich-beam specimen with an inserted rubber layer was studied using a finite element simulation in combination with the sine-sweep test. Quadratic relationships of dynamic elastic modulus and material loss factor of rubbers with frequency were suggested employing the least square error method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.688-694
• /
• 2002

Several methods were developed for on-line measuring oil consumption in gasoline engine using an oil consumption meter. The oil consumption meter indicates the oil quantity by real-time-measuring the oil level in the sump. In order to measure the oil consumption, the oil consumption meter proposed in this paper requires shorter time, less additional procedures, and shows better results than the traditional drain method. Under steady-state engine-operating conditions, the results obtained through the regression or the difference method show an good agreement with those through the drain method. Under transient engine-operating conditions, on the other hand, good results can be obtained through the reference method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.118-128
• /
• 2016

As the rural areas have experienced the population reduction and the aging, the service level of public transit decreases. This study analyzes the effecting factor to user satisfaction of demand response transport(DRT) as alternative to rural public transit by the quantile regression that aims at estimating either the conditional median or other quantiles of the response variable. Jeonbuk Province tested DRT operations in Dongsang of Wanju County and Sannae of Jeongup City each in 2015. The user DRT satisfaction of Wanju was higher than one of Jeongup in basic statistics analysis. The difference in satisfaction between higher quantile and lower quntile of Wanju is smaller than one of Jeongupy as a result of quantile regression analysis. Also, Wanju DRT continues the second test operation of DRT as satisfaction from Ordinary Least Squares(OLS) close to higher satisfaction quantile.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.103-106
• /
• 1998

본 논문에서는 음성인식 시스템의 인식 정도의 향상을 위해서 동적 특징으로서 K-L(Karhanen-Loeve)계수를 이용하여 음소모델을 구성하는 방법을 제안하고, 음소, 단어, 숫자음 인식 실험을 통하여 그 유효성을 검토하였다. 인식 실험을 위한 음성자료는 한국 전자통신 연구소에서 채록한 445단어와 국어정보공학연구소에서 채록한 4연속 숫자음을 사용하였으며, K-L계수 동적 특징의 유효성을 확인하기 위해 정적 특징으로서 멜-켑스트럼과 동적 특징으로서 K-L계수 및 회귀계수를 추출한 후 음소, 단어, 숫자음 인식 실험을 수행하였다. 인식의 기본 단위로는 48개의 유사음소단위(Phoneme Likely Unite ; PLUs)를 음소모델로 사용하였으며, 단어와 숫자음 인식을 위해서는 유한상태 오토마타(Finite State Automata; FSA)에 의한 구문제어를 통한 OPDP(One Pass Dynamic Programming)법을 이용하였다. 인식 실험 결과, 음소인식에 있어서는 정적특징인 멜-켑스트럼을 사용한 경우 39.8%, K-L 동적 계수를 사용한 경우가 52.4%로 12.6%의 향상된 인식률을 얻었다. 또한, 멜-켑스트럼과 회수계수를 사용한 경우 60.1%, K-L계수와 회귀계수를 결합한 경우에 있어서도 60.4%로 높은 인식률은 얻었다. 이 결과를 단어인식에 확장하여 인식 실험을 수행한 결과, 기존의 멜-켑스트럼 계수를 사용한 경우 65.5%, K-L계수를 사용한 경우 75.8%로 10.3% 향상된 인식률을 얻었으며, 멜-켑스트럼과 회귀계수를 결합한 경우 91.2%, K-L계수와 회귀계수를 결합한 경우 91.4%의 높은 인식률을 보였다. 도한, 4연속 숫자음에 적용한 경우에 있어서도 멜-켑스트럼을 사용한 경우 67.5%, K-L계수를 사용한 경우 75.3%로 7.8%의 향상된 인식률을 보였으며 K-L계수와 회귀계수를 결합한 경우에서도 비교적 높은 인식률을 보여 숫자음에 대해서도 K-L계수의 유효성을 확인할 수 있었다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.128-133
• /
• 2020

In this study, an 1-dimensional positioning method using iterative linear regression for path loss expression is proposed. In the proposed method, received signal strengths (RSS) measured in several locations and distances between the measuring locat ions obtained by dead reckoning are used to derive a linear regression for the path loss from the transmitting beacon. In the proposed method, for the distance between the transmitting beacon and a target measuring location, several tentative values are assumed. For each tentative value, a linear regression is obtained. Among the linear regression expressions, the one closest to the known reference RSS value is selected and used to derive the distance to the target location. Test results show that the proposed method is more accurate than path loss model.

• The Korean Journal of Applied Statistics
• /
• v.22 no.3
• /
• pp.531-539
• /
• 2009

Logistic regression is widely used as a datamining technique for the customer relationship management. The maximum likelihood estimator has highly inflated variance when multicollinearity exists among the regressors, and it is not robust against outliers. Thus we propose the robust principal components logistic regression to deal with both multicollinearity and outlier problem. A procedure is suggested for the selection of principal components, which is based on the condition index. When a condition index is larger than the cutoff value obtained from the model constructed on the basis of the conjoint analysis, the corresponding principal component is removed from the logistic model. In addition, we employ an algorithm for the robust estimation, which strives to dampen the effect of outliers by applying the appropriate weights and factors to the leverage points and vertical outliers identified by the V-mask type criterion. The Monte Carlo simulation results indicate that the proposed procedure yields higher rate of correct classification than the existing method.

• Journal of Industrial Convergence
• /
• v.16 no.4
• /
• pp.33-46
• /
• 2018

Personal credit scoring is an effective tool for banks to properly guide decision profitably on granting loans. Recently, many classification algorithms and models are used in personal credit scoring. Personal credit scoring technology is usually divided into statistical method and non-statistical method. Statistical method includes linear regression, discriminate analysis, logistic regression, and decision tree, etc. Non-statistical method includes linear programming, neural network, genetic algorithm and support vector machine, etc. But for the development of the credit scoring model, there is no consistent conclusion to be drawn regarding which method is the best. In this paper, we will compare the performance of the most common scoring techniques such as logistic regression, neural network, and support vector machines using personal credit data of the financial institution in China. Specifically, we build three models respectively, classify the customers and compare analysis results. According to the results, support vector machine has better performance than logistic regression and neural networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.391-394
• /
• 2015

They evaluate the bone age using the GP-BP (Greulich-Pyle and Bayley-Pinneau) and TW3 (Tanner-Whitehouse 3) in clinical. The skeletal maturity in Hand AP is evaluated by clinical experience of physicians and this is qualitative evaluation not same in every physicians. In order to devise and evaluate new methods not using TW3 method in this situation. The study was conducted with 70 (Male 35, Female 35) children who visited Yangsan P Hospital from March 2014 to March 2015. The study measured the length of growth plate and distal proximal phalanx and conducted regression analysis for statistical significance test of bone age length difference. The study found average and standard deviation corresponding to certain ranges each bone age. The more bone age increase, the more the length of growth plate and distal proximal phalanx decreased. The girls have less average rather than the boys because bone grows fast. The girls have first period age of 12 to 14, it appears length variation significantly. The study conducted regression analysis and this has statistical significance.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.101-110
• /
• 1996

Using response surface methodology(RSM), the various conditions(agitation speed, air flow, glucose concentration) in jar fermentor culture were investigated to find the optimum conditions for maximum enzyme production. Central-composite-design was used to control the variable constant in the experiment. The glucose isomerase production of Steptomyces chibaensis J-59 was mostly affected by the air flow rate and glucose concentration. The estimated optimum conditions were as follows: 1% birchwood xylan, 1.5% CSL, 0.1% $MgSO_4{\cdot}7H_2O$, 0.012% $CoCl_2{\cdot}6H_2O$, pH 7.0; air flow, 2.2vvm; agitation speed, 587rpm; glucose concentration, 0.586%. Experimental values(7.43GIU/ml) for the enzyme production obtained from the given optimum conditions had a almost resemblane to response values(7.67GIU/ml) predicted by the RSM. The jar fermentor culture by the RSM produced xylose isomerase about 2.7 times as much as the baffled flask culture.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.121-133
• /
• 2021

Suspended Solids (SS) generated in rivers are mainly introduced from non-point pollutants or appear naturally in the water body, and are an important water quality factor that may cause long-term water pollution by being deposited. However, the conventional method of measuring the concentration of suspended solids is labor-intensive, and it is difficult to obtain a vast amount of data via point measurement. Therefore, in this study, a model for measuring the concentration of suspended solids based on remote sensing in the Nakdong River was developed using Sentinel-2 data that provides high-resolution multi-spectral satellite images. The proposed model considers the spectral bands and band ratios of various wavelength bands using a machine learning model, Support Vector Regression (SVR), to overcome the limitation of the existing remote sensing-based regression equations. The optimal combination of variables was derived using the Recursive Feature Elimination (RFE) and weight coefficients for each variable of SVR. The results show that the 705nm band belonging to the red-edge wavelength band was estimated as the most important spectral band, and the proposed SVR model produced the most accurate measurement compared with the previous regression equations. By using the RFE, the SVR model developed in this study reduces the variable dependence compared to the existing regression equations based on the single spectral band or band ratio and provides more accurate prediction of spatial distribution of suspended solids concentration.