• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.2
• /
• pp.51-59
• /
• 1986

Hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-heptane was studied over sulfided $Ni - W/\gamma - Al_2O_3$ catalyst at temperature ranges from 513 to 573 K and at pressure ranges from 20 to 60 x $10^5$ Pa. Hydrogenation of biphenyl (BP) and cyclohexylbenzene (CHB) observed in products were also run. The products were almost biphenyl and cyclohyxylbenzene, and the conversion of DBT was very sensitive to temperature. Concerning the products distribution while the formation of biphenyl decreased, the formation of cyclohexylbenzene increased in the range of high pressure. The reaction network was found to be sequential reaction which formed cyclohexybenzent through the intermediate of biphenyl. The disappearances of DBT and biphenyl were the first order with respect to DBT and biphenyl and their activation energys were 24.3 and 13.6 Kcal/mol, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.173-180
• /
• 2015

The purpose of this study was to fabricate a ferric nitrate impregnated activated carbon, and the performance for hydrogen sulfide by adsorption was evaluated. Sodium hydroxide was utilized to control pH in the process during generation of ferric hydroxide on the surface of the carbon. Critical mixing duration for generation of ferric hydroxide on the carbon was 48 hrs at pH 1 of the solution, in which the chemical adsorption of hydrogen sulfide was enhanced. The adsorption capacity of the impregnated carbon increased up to 0.10 g hydrogen sulfide/g carbon, which was 4.3 times higher than that of the raw carbon. Presence of FeOOH on the surface of the impregnated carbon was examined by X-ray diffraction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.911-919
• /
• 1998

부탄테트라카르복실 산을 이용한 면직물의 DP 가공에서 가장 효과적인 촉매로 알려진 sodium hypophosphite(SHP)를 대체하기 위하여 carbodiimide 촉매의 효과를 알아보았다. Carbo야-imide 촉매로는 cyanamide(CY), dicyandiamide(DCY)와 disodium cyanamide(DSC)를 사용하였다. DCY와 DSC가 일반적으로 CY보다 좋은 방추도와 방축도 등을 보였고 또한 독성이 낮고 저장시 안정도 등이 우수하므로 산업적인 응용이 가능하다. 필요한 방추도와 물리적성질의 균형을 위해서 가공욕의 pH 조절이 가장 중요한 인자로 나타났다. 촉매존재시에 면과 부탄테트라카르복실산의 에스터화 가교 반응 메커니즘을 제아하였다. 또한 황화 염료로 염색된 염색포에 대한 가공 효과 분석시 carbodiimide 촉매가 SHP 보다 대체로 작은 색상 변화를 유발시켰다. 이러한 연구 결과는 부양화와 여러 염료의 색상 변화를 유발시키는 SHP를 사용하지 않고 부탄테트라카르복실 산과 carbodiimide 촉매를 이용한 무포름알데히드, 무인 가공제의 면직물 DP 가공의 가능성을 보여 주고 있다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.355-360
• /
• 1997

The atmospheric concentration of dimethylsulfide (DMS), known as the predominant volatile organic. sulfur compound, is determined at subnanogram level by a combined application of non-cryogenic preconcentration method and gas chromatography with flame photometric detection (GC/FPD). The volatile DMS in air is preconcentrated using a trapping tube containing adsorbent like Molecular Sieve 5A (or gold-coated sands). The tube is then connected to the GC/FPD system via a six-way rotary valve, thermally desorbed at 40$0^{\circ}C$, separated on OV101 column, and detected by a flame photometric detector. The DMS peak elutes at about 2.5 mins and is integrated electronically. The analytical precision, if expressed in terms of relative standard error, is around 5%. The detection limit of our GC/FPD system is ca 1 ng of DMS. Details of our analytical system are presented.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.358-359
• /
• 2003

산업화가 급속히 진행됨에 따라 삶의 질은 향상된 반면, 대기오염으로 인한 피해는 증가하고 있다. 대기 중 존재하는 휘발성 유기화합물 (VOCs)은 인체에 독성을 가지며 암을 유발하고, 오존의 전구물질(precursor), 광화학 스모그의 원인물질, 성층권의 오존층 파괴 및 지구온난화에도 영향을 미칠 뿐 아니라 (Derwent et al., 1996) 악취를 유발하기도 한다. 악취는 황화수소(hydrogen sulfide), 메르캅탄류(mercaptans), 아민류(amines) 등 기타 자극성 있는 기체상 물질이 사람의 후각을 자극하여 불쾌감과 혐오감을 주는 냄새로 정의되며, 주로 인체의 위해성보다는 정신적ㆍ심리적인 피해를 일으키는 감각공해라고 할 수 있다 (환경부, 2002). (중략)

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.165-175
• /
• 2013

This study aims to analysis correlation in septic tank and sewer pipe between odor substances and complex odor. For the analysis, convert odor substances to odor intensity, and estimate the effect of odor substances on complex odor. As a result, both Hydrogen sulfide and Methyl mercaptane of specified offensive odor substances accounted for 29 percent of the effect of odor substances on complex odor. Hydrogen sulfide and Methyl mercaptane are major cause of odor from septic tank and sewer pipe. The result of this study is suggested to be used as a preliminary data for research on analysis complex odor and odor substances.

• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.1-9
• /
• 1996

Experiments have been made to test the practical feasibility of using calcined manganese ore to desulfurize hot reducing gas. In this study, the effects of particle size of sorbents, temperature of sulfidation, flow rate and sorbent characteristics on the $H_2S$ removal efficiency of calcined manganese ore were investigated. Experimental results showed that the removal efficiency of $H_2S$ was optimum when the temperature was about 800$\circ$C and that the smaller particle size the higher the $H_2S$ removal efficiency. When the temperature was above 800$\circ$C, the reactivity of sorbent has lowered because agglomeration of sorbent increased intraparticle transport resistance, and this phenomenon was confirmed by SEM photographs. As the temperature increases, capacity for the $H_2S$ removal was increased but the equilibrium concentration of $H_2S$ was not affective.

• Journal of Powder Materials
• /
• v.8 no.4
• /
• pp.253-257
• /
• 2001

The effects of mechanical alloying conditions on the formation of Mn-sulfide powders were analyzed. Impeller rotating speed, lubricant coating and added amounts of process control agent(stearic acid) were selected as a process control factor. MnS compounds are synthesized in 3 hours by mechanical alloying at the alternative milling condition. Discontinuous rotating speed of 1200rpm for 4 minutes and 1000rpm for 1 minute shows more effects on the compound formation of MnS. After coating of lubricant on the wall, elementary Mn and sulfur were partially remained by mechanical alloying. The friction effects of the wall and grinding media on the powders are significantly important to form the compound of MnS.

• Korean Journal of Microbiology
• /
• v.24 no.1
• /
• pp.62-66
• /
• 1986

Many photosynthetic bacteria capable of hydrogen production were isolated from samples of mud flats of paddy field collected in Kim Hae and Dae Jeo. A strain 230 was selected for the high capability of hydrogen evolution. As the results of examination in physiological, morghological and cultural characteristics, the strain 230 was identified as Rhodopseudomonas sphaeroides.

• Journal of Korea Society of Waste Management
• /
• v.34 no.5
• /
• pp.468-473
• /
• 2017

This study was carried out to examine the characteristics of hydrogen sulfide adsorption using an iron hydroxide-based adsorbent. The prepared adsorbent was discussed with regard to its adsorption capacity and analyzed via surface analysis methods to illustrate the physical characteristics of hydrogen sulfide adsorption. As the drying temperature increased, the adsorption capacity of the adsorbent decreased from 29.15wt% to 22.73wt%. The adsorption capacity was decreased as the space velocity increased and showed an adsorption capacity of about 3.65 at $3,157.6h^{-1}$. The effect of sulfur dioxide was to decrease the adsorption capacity from 29.15wt% to 27.94wt%. The adsorbent exhibited the amorphous type in its physical appearance based on XRD and EDS analysis.