• 제목/요약/키워드: 황준환

검색결과 6건 처리시간 0.017초

Ar레이저를 이용한 위상천이 광섬유격자의 제작 (Fabrication of Phase-shifted fiber bragg gratings using frequency doubled Ar-ion Laser)

  • 정수진;이상훈;류성권;황준환;이상배;김상혁;최상삼;송석호
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.192-193
    • /
    • 2001
  • 높은 파장 선택도를 가지고 광신호를 제어하는 광섬유격자는 단주기 격자, 장주기 격자, 첩 격자 등이 있는데 이러한 격자의 제작 기술은 여러 응용분야에서 활용도 높은 소자를 제작하는 데 이용되어져 왔다. 본 논문에서는, 주어진 반사 파장 내에 매우 좁은 선폭의 여러 투과 스펙트럼 밴드를 가지며 그 응용성이 다양한 격자 제작을 목표로 이미 수행되어진 위상천이 격자의 시뮬레이션[1]을 토대로 $\pi$위상천이 격자를 제작하였다. (중략)

  • PDF

캐스케이드된 장주기 광섬유격자 해석에서의 두모드 결합 모델의 유효성 (Validity of the Two-Mode Coupling Model in the Context of Cascaded Long-Period Fiber Gratings)

  • 박동욱;황준환
    • 대한전자공학회논문지SD
    • /
    • 제37권9호
    • /
    • pp.7-14
    • /
    • 2000
  • 본 논문에서는 캐스케이드된 장주기 광섬유격자 구조의 해석에 기존의 두모드 결합 모델(TMCM)을 적용할 때에 발생하는 제한요인들에 대하여 분석하고, 아울러 이를 바탕으로 만족 시 TMCM 적용의 유효성을 보장하는 구체적인 조건들을 제안하다. 또한, 실제 상황에서 흔히 찾아 볼 수 있는 격자 파라메터 값을 적용하여 이와 같은 조건들이 의미하는 격자주기 변화의 허용범위와 사용가능 대역폭에 관하여 수치해석 결과를 갖고 논한다.

  • PDF

Urea-SCR 단홀 Injector 노즐형상 변화에 따른 비정상유동특성의 해석적 연구 (Analytical Study on Unsteady Flow Characteristics of Urea-SCR Single Hole Injector depend on Nozzle Shape Change)

  • 황준환;박성영
    • 한국분무공학회지
    • /
    • 제24권3호
    • /
    • pp.105-113
    • /
    • 2019
  • In this paper, a study of Urea-SCR System for Dosing Injector for responding to enhanced environmental regulations has been conducted. There is a limit to the experimental approach due to the structural characteristics of the injector. In order to overcome this problem, The analysis was performed assuming unsteady turbulent flow through computational fluid analysis and the internal flow characteristics of the injector were analyzed. By changing the nozzle shape of the injector, the performance factors of the swirl injector by shape were selected and compared. The design parameters were modified by changing the diameter of the nozzle at a constant ratio compared to the base model. Swirl coefficient, outlet mass flow, and sac volume were selected as performance parameters of the injector. The Conv. model to which the taper was applied showed the dominance in mass flow rate, discharge coefficient and swirl because of the smooth fluid flow by shape. Swirl coefficient, outlet mass flow, and sac volume were selected as performance parameters of the injector. As a result of the comparison coefficient derivation with those performance parameters for comparing the performance of the model-specific injector, the Conv-140 model with the nozzle diameter expanded by 140% showed the best value of the comparison coefficient.

신호교차로에서 차량 통과특성 연구 (공격적인 운전자가 운전하는 차량을 중심으로) (Passing Behavior of Vehicles in Signalized Intersection (Focused on Vehicles Driven by Offensive Drivers))

  • 황경수;황준환;김점산;이성모
    • 대한교통학회지
    • /
    • 제22권2호
    • /
    • pp.103-108
    • /
    • 2004
  • 본 연구는 신호교차로의 정지선 통과차량의 차두시간 결정은 단순히 출발순서에 영향을 받아 결정되지만은 않는다는 문제의식에서 출발하였다. 실제 신호교차로의 개별차량 통과시 속도와 차두시간 자료를 검지기와 검지알고리즘을 활용 파악하고 분석에 활용하였다. 단순 자료분석에서는 차량의 통행행태를 결정하는 모형을 정립하는 것이 무의미한 것으로 파악될 수 있는 통계분석 결과가 나타났다. 그러나, 공격적인 운전행태를 가진 운전자가 운전하는 차량의 자료를 선별하고 자료 스케일 조정(ln값 활용)을 통해 결정계수 0.91수준의 모형이 설정되었다. 구축된 모형은 교차로 정지선에서 통과하는 차량의 차두시간은 앞차의 속도, 차두시간과 자체차량의 속도에 영향을 받는 사실을 밝혀주었다.