• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.597-608
• /
• 1994

A new process for the production of high purity ${\alpha}-Al_2O_3$ from ammonium aluminium sulfate solution abtained through the sulfation of low grade bauxite ore with $(NH_4)_2SO_4$, and leaching of the sulfated product was investigated. This process is consisted of solvent extraction for Fe component removal from ammonium aluminum sulfate solution and homogeneous precipitation of Al containing precipitate from the refined ammonium aluminium sulfate solution by using urea as precipitator. The optimum conditions of solvent extraction with Alamine 336 as extractant were shaking time of 4min, organic phase ratio to aqueous phase of 0.25. The types of precipitation products from this precipitation were amorphous alumina gel, pseudo-boehmite and crystalline boehmite in the lower temperature of $100^{\circ}C$, in the range from $125^{\circ}C$ to $150^{\circ}C$, and above $150^{\circ}C$, respectively. And also amorphous alumina gel hydrate in $1000^{\circ}C$ and crystalline boehmite in $1250^{\circ}C$ were tranfered to ${\alpha}-Al_2O_3$, respectively. This alumina was identified as ${\alpha}-Al_2O_3$ of purity 99.7%.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.85-96
• /
• 2017

Gold mineralization of Samjeong and Yongjang gold mines in Uichang area shows characteristics of Bonanza-type gold deposits. Ores are mainly developed along the contact parts between quartz vein and arkosic sandstone beds(Fe-rich bed) in sedimentary rock. Electrum, silver sulfide and sulfate minerals are mainly in the ores. On the other hand, gold mineralization is less developed in cherty rock and andesitic rock than arkosic sandstone. The study highlights characteristics of gold precipitation in the deposit on the basis of numerical modelling of the reactions between the assumed hydrothermal ore fluids with multicomponent heterogeneous equilibrium calculations. Aqueous species, gases and minerals, containing electrum are included in the calculations. The reaction result between hydrothermal ore fluids and arkosic sandstone show that pH increasing in the ore-forming fluid would trigger precipitation of quartz, chlorite, sericite, chalcopyrite, galena, pyrite, electrum, actinolite and feldspar. The numerical modelling also illustrates the drastic increase of pH and desulfidation lead to precipitation of electrum. Ag/Au ratios in the ore vary with pH conditions and subsequently precipitation of silver-bearing sulfides such as acanthite and polybasite. The modelling of the reaction between andesitic rock and ore-forming fluid shows that mineral assemblages of the case are analogous to ones of the reaction between arkosic sandstone and fluid except the latter has little portion of electrum. The abovementioned modelling results suggest that gold-silver mineralization is bounded by host rocks at the study area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.104-111
• /
• 2015

This study shows the mechanical properties of alkali-activated slag cement (AASC) synthesized using sulfate with NaOH solution. The used sulfates were calcium sulfate ($CaSO_4$, denoted CS) and sodium sulfate ($Na_2SO_4$, denoted SS). The replacement ratio of sulfates was 2.5, 5.0, 7.5 and 10.0% by weight of slag. NaOH solution of 2M and 4M concentration was used. A sample was activated with sulfate and activated with blended activator (blending NaOH solution with sulfate) respectively. 24 mix ratios were used and the water-binder weight ratio for the test was set 0.5. This research carried out the compressive strength, flexural strength, ultrasonic pulse velocity (UPV), absorption and X-ray diffraction (XRD). In the case of samples with CS, sample with 7.5% CS, sample with 2M NaOH+5.0% CS and sample with 4M NaOH+5.0% CS showed the good performance in the strength development. In the case of samples with SS, sample with 10.0% SS, sample with 2M NaOH+7.5% SS and sample with 4M NaOH+2.5% SS obtained good performance in strength. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of samples indicated that the hydration products formed in samples were ettringite, CSH and silicate phases. In this study, it is indicated that when compared to the use of sulfate only, the use of both sulfate and NaOH solution makes mechanical properties of AASC better.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.934-938
• /
• 1997

Acrylic acid was grafted onto the peroxidized cellulose which was stored at room temperature for 20 days after ${\gamma}$-ray irradiation in air. The effect of acids and metallic salts on the grafting yields was determined. The addition of both the acid and metallic salt was found to accelerate the grafting yield much more than the only metallic salt, and the addition of $FeSO_4{\cdot}7H_2O$ led to much higher grafting yield than that of $CuSO_4{\cdot}5H_2O$. The effect of acid on the grafting yield increased by the order $H_2>SO_4>HCl>HNO_3>CH_3COOH$. With the addition of $H_2SO_4$, the grafting yield rapidly increased up to $7{\times}10^{-2}$M, and then levelled off.

• Journal of the Korean Chemical Society
• /
• v.46 no.4
• /
• pp.323-330
• /
• 2002

The protonation equilibrium of 5-substituted 2-furaldehydes is investigated spectrophotometrically in aqueous sulfuric acid at $25^{\circ}C$ and the basicity constants(p$K_{BH+}$) of the substrates is calculated by means of the excess acidity method. The basicity constant of 5-metyl-2-furaldehyde having electron donating group is larger than that of 5- nitro-2-furaldehyde having electron withdrawing group. Difference between the basicity constants(p$K_{BH+}$) of these two compounds was about 3.25 pK unit. The m value which is the degree of solvation of the protonated substrate is similar to that of acetophenone having same protonation site. The dependence of p$K_{BH+}$ on m value shows good linear cor-relation.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.556-562
• /
• 2006

Quarternized poly(4-vinyl pyridine)s have been prepared by the reaction of poly (4-vinyl pyridine)s (Mw=50 kg/mol and 200 kg/mol) and alkylating agents varying the carbon numbers of the alkyl groups (m):dimethyl sulfate (m=1) as well as bromoalkane (m= 5, 8, 12, 16, and 22) was used as an alkylating agent. The degree of alkylation was determined by using an elemental analysis and NMR spectroscopy. As a result, polyelectrolytes were obtained by the almost full alkylation of poly (4-vinyl pyridine)s. The critical aggregation concentration (CAC) was determined by measuring the change of turbidity occurred by addition of sodium dodecyl sulfate (SDS) into aqueous solution of quarternized poly-(4-vinyl pyridine)s, and the dependence of molecular weight of polymer, the length of N-alkyl group and concentration of NaCl upon CAC was investigated. As a result, as the molecular weight or the length of alkyl group was increased, less amount of SDS Gould induce the aggregation.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.141-142
• /
• 2003

최근 자동차 수요증가 및 산업용 보일러 둥 급증하는 추세이며 이로 인한 대도시 대기오염 문제는 위험수위에 도달해 있다. 이러한 산업용 보일러, 화력발전소등 고정배출원과 자동차에서 발생하는 배기가스에는 인체에 유해한 일산화탄소(CO), 질소산화물(NOx), 황산화물(SOx)등이 다량 함유되어 있다. 유독성 가스중 질소산화물(NOx) 저감방법에는 특히 선택적 촉매환원법(Selective Catalytic Reduction, SCR)이 가장 널리 적용되고 있다. SCR법은 촉매하에서 NH$_3$, CO, 탄화수소(메탄, 에탄올, 프로판 등)의 환원제를 사용하여 NOx를 $N_2$로 전환하시키는 기술이다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.77-78
• /
• 2007

AZ31 마그네슘 판재의 장식 도금을 공정 개발을 적용하기 위한 기초 연구로서 전처리 특성에 따른 마그네슘 AZ31 판재의 아연치환도금의 특성을 연구하였다. AZ31 판재는 다이캐스팅으로 사용되는 AZ91 소재에 비해 산세에 대해 민감한 반응을 나타내었다. 소재의 균일화는 시편 E와 F에서 균일하고 광택 있는 표면을 얻었고, 질산은 표면 에칭효과만을 가진다는 것을 알 수 있었다. 아연치환도금을 위한 전처리에 있어서는 시편 E에서 우수한 밀착력을 나타내었다. 이후 청화동 도금과 황산동 도금, 니켈도금 3가 크롬도금을 실시하여, X-cutting 테이핑 테스트에서 양호한 밀착성과 내식성 72시간, 열탕시험을 만족하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.89-89
• /
• 2019

수환경으로 유출되는 유해화학물질은 독성을 가지고 직접 유출되거나 다양한 매체와 반응하여 화재 및 폭발 등의 사고가 발생한다. 실제로 낙동강 유역에서는 1991년 페놀 유출사고를 시작으로 2009년 구미공단 '1,4-다이옥산' 유출사고, 2014년 11월 경북 봉화군의 황산유출사고 등 크고 작은 사고가 빈번히 발생하고 있으며 작년 6월에는 대구와 부산의 수돗물에서 과불화화합물이 검출되기도 하였다. 이러한 대규모 사고를 방지하기 위해 신속한 오염물의 거동 예측이 가능한 추적모델이 필요하며, 본 연구에서는 수환경으로 유출된 유해화학물질의 추적을 위한 1차원 저장대 모형을 개발하였다. 일반적으로 저장대 모형은 복잡한 하천 구조를 하천의 주 흐름이 존재하는 본류대와 하천 흐름이 정체되는 저장대, 그리고 하상구조로 단순화 하여 나타낸다. 본류대에서는 하천흐름에 의한 이송 및 횡방향 유속차로 발생하는 전단류에 의한 확산이 일어나며, 저장대와의 물질교환으로 발생하는 저장효과와, 하상구조와의 흡착 및 탈착, 그리고 생물화학적 반응 및 휘발이 발생한다고 가정한다. 본류대와 저장대간의 질량교환은 난류유속변동과 농도차에 의해서만 발생한다고 가정하고 오염물질의 이송과 분산과정을 해석한다. 저장대에서는 이송 및 전단류에 의한 확산은 일어나지 않으며, 본류대와의 물질교환으로 발생하는 저장효과와 하상구조로의 흡착, 그리고 생물화학적 반응 및 휘발이 발생한다고 가정하며, 하상구조에서는 본류대 및 저장대와의 흡착 및 탈착만 발생한다고 가정한다. 저장대 모형의 해석을 위해서는 리치(Reach) 별로 본류대 분산계수($K_F$), 본류대 면적($A_F$), 저장대 면적($A_S$), 그리고 저장대 교환계수(${\alpha}$)의 네 가지 저장대 매개변수가 필요하며 본 연구에서 개발된 저장대 모형은 흡탈착, 생물화학적 반응 및 휘발 과정을 모두 고려하여 유해화학물질의 확산 거동을 모의한다. 최적의 리치길이, 흡탈착, 반응 및 휘발 계수를 산정하여 모형의 정확도를 향상시켰으며, 신속하고 정확하게 오염물의 거동을 예측할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.