• The Korean Journal of Mycology
• /
• v.22 no.2
• /
• pp.122-129
• /
• 1994

The role of metal ions for the activity of the mitochondrial $F_1-ATPase$ was studied. Removal of non-heme iron ion from the mitochondria by dialysis against chelating agents, 10 mM ethylenediaminetetraacetic acid(EDTA) and 10 mM o-phenanthroline(o-Phe), led to 56% and 49% inactivation of the enzyme, respectively. The enzyme dialyzed against EDTA was reactivated 81% by the addition of 0.5 mM $Fe^{3+}$ and 70% by 0.5 mM $Mg^{2+}$. But, $Fe^{2+}$ did not reactivate the enzyme. Coexistence of 0.5 mM $Fe^{2+}$ and 0.5 mM $Mg^{2+}$ resulted in 95% reactivation of the enzyme, while $Fe^{3+}$ with 0.5 mM $Mg^{2+}$ did not reactivate the enzyme like the effect of $Fe^{2+}$ alone. The enzyme dialyzed against o-Phe showed the similar results. These data showed that $Fe^{3+}$ is predominantly required for the activity of the mitochondrial $F_1-ATPase$ in Lentinus edodes and stimulated the activity of it by $Mg^{2+}$. $Fe^{3+}$ and $Mg^{2+}$ increased enzyme's affinity for substrate, decreasing the Km value 1.67 mM to 0.65 mM.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.363-371
• /
• 1991

The catalytic performance and availability of heteropoly compounds for the conversion of methanol to hydrocarbons have been studied. The effects of reaction conditions such as reaction temperature, methanol partial pressure and residence time and the effects of ion-exchange of the catalysts were examined for enhancing the yield of hydrocarbons and the selectivity of low olefins. Their acid strength depended on the kind of countercation, and the yield of hydrocarbons and the selectivity for propylene to propane were closely related to the electronegativity of the corresponding countercations. In contrast to the other heteropoly compounds, the ammonium salt showed a considerably high catalytic activity and a high selectivity for paraffins to low olefins.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.643-648
• /
• 2010

Production of biodiesel from soybean oil catalyzed by Lewis acidic ionic liquids(ILs) containing metal chloride salts was investigated in this study. Metal chloride salts, such as $SnCl_2$, $ZnCl_2$, $AlCl_3$, $FeCl_3$ and CuCl, were screened for oil transesterification in the range of 363-423 K. Among these metal chlorides, tin chloride showed particularly high catalytic property for the oil transesterification. Similarly, among these Lewis acidic ionic liquid catalysts, $[Me_3NC_2H_4OH]Cl-2SnCl_2$ resulted in a high fatty acid methyl esters(FAMEs) content of 91.1% under the following reaction conditions: 403 K, 14 h, and a molar ratio of 1:12:0.9 (oil:methanol:catalyst). Unlike the pure tin chloride catalysts, Lewis acidic ILs containing tin chloride $[Me_3NC_2H_4OH]Cl-2SnCl_2$ catalyst could be recycled up to five times without any significant loss of activity by separating from the FAMEs with simple decantation. The Lewis acidity and high moisture-stability of this catalyst appeared to be responsible for the excellent catalytic performance. The effects of reaction time and the molar ratio of methanol/catalyst to oil on the FAMEs production were also studied in this work.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.224-228
• /
• 1991

The effect of linoleate hydroperoxides(LAHPO) on pepsin activity was investigated. The activity of pepsin was largely decreased by LAHPO at various temperatures and pH. The inactivation of pepsin seems to be the radicals in the system because ascorbate and metal ions enhanced the inactivation of enzyme by LAHPO. It was shown by SDS-PAGE that LAHPO caused scission of the enzyme in the model system.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.112-112
• /
• 2016

인체접촉시 니켈도금의 알러지 반응을 억제하기 위한 대체 도금기술인 비 시안계 Cu-Sn 합금도금을 개발함에 있어서, 황산구리5수화물과 황산제일주석을 금속염으로 하여 황산 및 계면활성제, 유화제 등을 포함한 각종 유기첨가제를 포함하였고 특히 은백색조의 외관 색상과 안정적인 Cu-Sn 합금전착을 위해 2종의 착화제인 EDTP($C_{14}H_{32}N_2O_4$)와 TEA(Triethanolamine)를 첨가한 비 시안계 Cu-Sn 합금 도금액을 도출하였다. Cu-Sn 합금도금 피막 조성의 균일화를 도모하기 위해서는 합금 도금액중의 Cu와 Sn 금속이온 농도를 일정하게 유지하는 것이 필요하다. 그러나 합금 도금액중 2가 주석이온($Sn^{2+}$)은 수용액중에서 4가 주석이온($Sn^{4+}$)으로 산화됨으로써 도금액 색상이 백탁이 되고 Stannic Hydroxide($Sn(OH)_4$, $SnO_2{\cdot}2H_2O$)이 생성되어 대량의 침전물이 침강하는 문제점이 발생되는 등 시간 경과에 따른 도금액의 경시 변화가 발생되었다. 상기 침전물은 연속여과에 의해 제거 가능하나 합금 도금액중 $Sn^{2+}$ 농도가 지속적으로 감소하게 된다. 이는 합금 도금액중 금속이온 비율이 변동함으로써 합금도금 피막의 조성비를 일정하게 유지하는 것이 곤란해진다. 이에 $Sn^{4+}$ 침전물 생성을 방지하기 위한 산화방지제를 개발하고 또한 산화방지제의 첨가에 따른 도금 피막 외관에 미치는 영향을 평가하여 외관 개선을 위한 광택제를 개발하고자 한다. 본 연구의 결과를 토대로 니켈도금과 동등 이상의 기능 특성을 갖는 비시안계 Cu-Sn 합금도금액을 개발하여 실용화하는 것을 목적으로 하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.68.2-68.2
• /
• 2017

인체접촉시 니켈도금의 알러지 반응을 억제하기 위한 대체 도금기술인 비 시안계 Cu-Sn 합금도금을 개발함에 있어서, 황산구리5수화물과 황산제일주석을 금속염으로 하여 황산 및 계면활성제, 유화제 등을 포함한 각종 유기첨가제를 포함하였고 특히 은백색조의 외관 색상과 안정적인 Cu-Sn 합금전착을 위해 2종의 착화제인 EDTP (Ethylenediaminetetrapropanol, $C_{14}H_{32}N_2O_4$)와 TEA (Triethanolamine)를 첨가한 비 시안계 Cu-Sn 합금 도금액을 도출하였다. Cu-Sn 합금도금 피막 조성의 균일화를 도모하기 위해서는 합금 도금액중의 Cu와 Sn 금속이온 농도를 일정하게 유지하는 것이 필요하다. 그러나 합금 도금액 중 2가 주석이온($Sn^{2+}$)은 수용액 중에서 4가 주석이온($Sn^{4+}$)으로 산화됨으로써 도금액 색상이 백탁이 되고 Stannic Hydroxide($Sn(OH)_4$, $SnO_2{\cdot}2H_2O$)이 생성되어 대량의 침전물이 침강하는 문제점이 발생되는 등시간 경과에 따른 도금액의 경시 변화가 발생되었다. 상기 침전물은 연속여과에 의해 제거 가능하나 합금 도금액 중 $Sn^{2+}$ 농도가 지속적으로 감소하게 된다. 이는 합금 도금액 중 금속이온 비율이 변동함으로써 합금도금 피막의 조성비를 일정하게 유지하는 것이 곤란해진다. 이에 $Sn^{4+}$ 침전물 생성을 방지하기 위한 산화방지제를 개발하고 또한 산화방지제의 첨가에 따른 도금 피막 외관에 미치는 영향을 평가하여 외관 개선을 위한 광택제를 개발하고자 한다. 본 연구의 결과를 토대로 니켈도금과 동등 이상의 기능 특성을 갖는 비 시안계 Cu-Sn 합금도금액을 개발하여 실용화하는 것을 목적으로 하였다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.65-65
• /
• 2009

철강 재료의 GMA 용접 시, 보호가스로 $CO_2$ 가스를 사용하면 가격이 저렴하고 용입이 깊다는 장점이 있어 국내에서 광범위하게 사용되어 왔다. 그러나 일반적으로 활성가스인 $CO_2$를 사용한 GMA용접은 아크가 불안정하고 스패터가 많이 발생한다는 단점이 있어 아크 안정성 개선의 필요성이 부각되었다. 거기다 용접 자동화 및 용접 품질의 고급화 추세로 아크 안정성이 $CO_2$용접에서 점점 중요해지면서, 아크 안정화 및 스패터 저감을 위한 연구가 활발히 진행되어 왔다. 본 연구에서는 GMA 용접 재료인 solid wire의 표면에 이온화 에너지가 낮은 금속인 인듐(In)을 전해 도금하여 중전류의 $CO_2$ 용접에 적용하였다. 고속 촬영과 아크 모니터링 분석을 통하여 금속 이행 모드 및 아크 안정화에 미치는 영향에 관하여 연구하였다. 동일 전압, 전류 조건에서 도금 두께를 달리하여 용접을 실시, 도금 두께에 따른 아크 안정성의 경향을 분석하였다. 그 결과 도금 두께가 두꺼워짐에 따라 아크가 넓어지는 것을 확인하였으며, 이는 아크 내에 이온화도가 높은 인듐 이온이 다량 포함됨으로써 이온의 양이 증가하기 때문인 것으로 생각된다. 또한 도금 두께가 일정 이상이 되면, 이행 모드가 용적의 아래에서 아크가 발생하는 반발 이행 모드에서 용적의 윗부분에서 아크가 발생하는 입상 용적 이행 모드로 바뀌었으며, 이때 단락 수가 현저히 줄어들어 아크가 안정해졌다. 이에 따라 인듐 도금 와이어는 기존보다 낮은 전류 영역에서도 안정적인 아크와 금속 이행 모드를 가지게 됨을 확인하였다.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.230-237
• /
• 2004

In this study nitroreductase from Pseudomonas sp. HK-6 capable of degrading 2,4,6-trinitrotoluene (TNT) was characterized. Through a series of purification process including ammonium sulfate precipitation, DEAE-sepharose, and Q-sepharose, three different fractions I, II, and III having the enzyme activity of NTRs whose molecular weights were approximately 27 kDa were detected in fractions from HK-6 cells. Specific activity of the three fractions were approximately 4.85 unit/mg, 5.47 unit/mg, and 5.01 unit/mg, and concentrated to 9.0-, 10.1-, and 9.3-fold compared to crude extract, respectively. The optimal pH and temperature for the three NTR fractions were approximately 7.5 and $30^{\circ}C$, respectively. Metal ions, $Ag^{＋}$ , $Cu^{ 2+}$, $Hg^{2＋}$ inhibited approximately 70% of enzymes activities of all NTR, while $Fe^{2＋}$ did not stimulate or inhibit the activities. Monitoring the effect of chemicals on the enzyme activity revealed that those NTR fractions lost enzyme activity in presence of $\beta$-mercaptoethanol, but were a little influenced by dithiothreitol, EDTA and NaCl. The three NTR fractions demonstrated enzyme activities for nitrobenzene and RDX as well as TNT.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.216-224
• /
• 1983

This work was undertaken to obtain some characteristics of proteolytic enzyme of marine gastropods such as sea hare, Aplysia kurodai, top shell, Turbo cornutus, and abalone, Haliotis discus hannai. An influence of pH, temperature and some chemicals on proteolytic activity of the crude enzyme extracted from digestive tract of the samples was taken into account and the stability of the enzyme during the storage at low temperature was also discussed. In comparison of the activities of the crude enzyme from the samples to the optimum conditions, it was characterized that abalone has twice or the more times higher activities than the other two species of the gastropoda in the acid and weak acid region, while, in the alkaline region, sea hare has six or the more times higher acitivities than the other two species. The proteolytic activity was facilitated by $Mn^{2+}$, some reducing agents, EDTA and DTT, and inhibited by $Hg^{2+}$ and SDS, but the other chemicals were not significantly affected to the activity. The low temperature storage of the enzymes of sea hare and top shell at $0^{\circ}C\;or\;-20^{\circ}C$ was not affected to the enzymic activity under the optimum pH condition except in the alkaline region. On the other hand, the low temperature storage was brought about no significant effect on the activity of the enzymes extracted from abalone under the optimum condition of the weak acid region, but apparently influenced to the activity under the optimum condition of the acid and alkaline region.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.575-580
• /
• 2015

Pd/C catalysts were prepared by various preparation methods such as ion exchange, impregnation and polyol method and also characterized by nitrogen adsorption-desorption isothermal, XRD, FE-TEM and CO-chemisorption. The activities of these catalysts were tested in the hydrogenation of cyclohexene to cyclohexane. Catalytic activities of Pd/C catalysts were found to be effected by the chosen preparation methods. Pd dispersions of each Pd/C catalysts prepared by ion exchange, impregnation and polyol method were 17.55, 13.82% and 1.35%, respectively, confirmed by CO-chemisorption analysis. These were also in good agreement with the FE-TEM results. The Pd/C catalyst prepared by ion exchange method exhibits good performance with the cyclohexene conversion rate of 71% for 15 min. These results indicate that Pd/C catalyst having higher dispersion and lower particle size is in favor of hydrogenation cyclohexene and also Pd dispersion increases with the increment of catalytic activity.