• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.2
• /
• pp.64-72
• /
• 2004

We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.

• Applied Biological Chemistry
• /
• v.27
• /
• pp.29-46
• /
• 1984

To utilize several species of hard wood as raw materials of feed products, fermentation characteristics of cellulosic substrates to single cell protein was investigated, and results were summarized as follows. Among the microorganisms investigated, Tricoderma viride was selected as one of the most cellulolytic. Mixed culture of fungi did not show a synergistic effect on cellulose degradation. When the fungi were cultured at $28^{\circ}C$ for 7 days in a medium containing wheat bran 25 g, cellulose 0.25 g, proteose peptone 0.025 g and tween 800.025 g, cellulotic activities on carboxy methyl cellulose and filter paper reached maximum at 12 hr. The alkali treatment resulted in increased degradation of substrate from 13 to 18% when treated with enzymes for 12h, and reducing sugar formation increased with decreased size of substrates. Glucose was a very good feedback inhibitor of the enzyme from T.viride than that of xylose. When the substrate was rehydrolyzed, hydrolysis rate was 31% to reducing sugars within 12 hr. Quantative anlysis with HPLC showed the ratio of glucose to xylose in sugar syrups as 1.77 to 1. For the purpose of producing cellulosic-single cell protein from the sawdust of mulberry tree, 15 strains of xylose-assimilating yeast were isolated from 42 samples of rotten woods and compost soils and examined for their ability to utilize xylose. Then three strains were selected by their strong xylose-assimilating activities. The cultivative condition, the growth characteristics, and protein and nucleic acid productivities of three strains were investigated. The results obtained were, 1. Wood hydrolysate of mulberry tree was assimilated by 5 strains of CHS-2, CHS-3, ST-40, CHS-12 and CHS-13. 2. The optimum initial pH and temperature for the growth of strain CHS-13 were 4.4 and $30^{\circ}C$. 3. The specific growth rate of strain CHS-13 was $0.23h^{-1}$ and generation time was 3.01 hrs at the optimum condition. 4. CHS-13 strain assimilated 81 % of sugar in wood hydrolysate. 5. CHS-13 strain was identified as Candida guilliermondii var. guilliermondii 6. When the CHS-13 strain was cultured in the wood hydrolysate containing yeast extract, L-protein content was increased with yeast extract concentration. 7. The L-protein and nucleic acid yields from wood hydrolysate were 0.73 mg/ml and $4.92{\times}10^{-2}\;mg/ml$ respectively. 8. An optimal nucleic acid content of CHS-13 strain was observed in the medium containing 0.2% of yeast extract.

• The Korean Journal of Mycology
• /
• v.12 no.3
• /
• pp.105-110
• /
• 1984

Seven seed samples of corn obtained from Kangweon Provincial Office of Rural Development, Kerea were tested for seed-borne fungi, and found that all the samples tested were infected with Fusarium moniliforme to an extent of $6.0{\sim}79.5%$. Severely infected seed samples showed poor germination on blotter. Seed component plating showed that the fungus present not only in tip caps, pericarps and endosperms, but also in embryos. Heavy infection of the fungus caused severe seed rot and seedling blight in soil, but the damage was not severe and many plants grew without any symptoms when the seeds with light infection were sown in soil. However the fungus was frequently detected from inside of the stems of healthy looking seedlings. The results indicate that the fungus transmit from seed to plant systemically. In inoculation experiments, the fungus produced stem rots on corn plants of 110 days old. The cultivar of Hwangok 3 was revealed more susceptible to the fungus than that of Suweon 19.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.185-195
• /
• 2012

Due to the high reduction and sorption capacity as well as the large specific surface area, nanosized mackinawite (FeS) is useful in reductively transforming chlorinated organic pollutants and sequestering toxic metals and metalloids. Due to the dynamic nature in its colloid stability, however, nanosized FeS may be washed out with the groundwater flow or result in aquifer clogging via particle aggregation. Thus, these nanoparticles should be modified such as to be built into permeable reactive barriers. This study employed coating methods in efforts to facilitate the installation of permeable reactive barriers of nanosized mackinawite. In applying the methods, nanosized mackinawite was coated on non-treated silica sand (NTS) and chemically treated silica sand (CTS). For both silica sands, the maximum coating of mackinawite occurred around pH 5.4, the condition of which was governed by (1) the solubility of mackinawite and (2) the surface charge of both silica and mackinawite. Under this pH condition, the maximum coating by NTS and CTS were found to be 0.101 mmol FeS/g and 0.043 mmol FeS/g respectively, with such elevated coatings by NTS likely linked with impurities (e.g., iron oxides) on its surface. Arsenite sorption experiments were performed under anoxic conditions using uncoated silica sands and those coated with mackinawite at the optimal pH to compare their reactivity. At pH 7, the relative sorption efficiency between uncoated NTS and coated NTS changed with the initial concentration of arsenite. At the lower initial concentration, uncoated NTS showed the higher sorption efficiency, whereas at the higher concentration, coated NTS exhibited the higher sorption efficiency. This could be attributed to different sorption mechanisms as a function of arsenite concentration: the surface complexation of arsenite with the iron oxide impurity on silica sand at the low concentration and the precipitation as arsenic sulfides by reaction with mackinawite coating at the high concentration. Compared to coated NTS, coated CTS showed the lower arsenite removal at pH 7 due to its relatively lower mackinawite coating. Taken together, our results indicate that NTS is a more effective material than CTS for the coating of nanosized mackinawite.

• The Korean Journal of Mycology
• /
• v.12 no.4
• /
• pp.133-140
• /
• 1984

Some properties of cellulolytic enzymes produced by Pleurotus sajor-caju JAFM 1017 during its growth in synthetic medium were investigated. The optimum pH of avicelase, CMCase, and ${\beta}-glucosidase$ was pH 5.5, pH 4.5 and pH 6.0, respectively. Avicelase and CMCase were stable within pH 5.0 to 6.0 and 4.0 to 6.0, respectively, and ,${\beta}-glucosidase$ was within pH 5.5 to 6.5. The optimum temperature of avicelase, CMCase and ${\beta}-glucosidase$ was the same of $40^{\circ}C$. The enzymes were stable below the optimum temperature, but the enzymes were unstable over the temperature of $50^{\circ}C$, and avicelase was losing about 91.7% of activity at $70^{\circ}C$ for 10 min. The enzyme activity of avicelase and CMCase was increased in proportion to the substrate concentration within 1% and 0.7%, respectively, and ${\beta}-glucosidase$ was within 0.1%. The Michaelis constants (Km) of avicelase and CMCase were 30.77mg avicel/ml and 14.64m Na-CMC/ml, respectively and ${\beta}-glucosidase$ was 5. 13mg salicin/ml. The reducing sugar production of avicelase was proportionaly increased until 120 min. and CMCase and ${\beta}-glucosidase$ were until 60min. The activity of three cellulolytic enzymes were increased by $Ca^{2+}$ at the concentration of $10^{-2}M$, but were inhibited by $Hg^{2+}$, $Ag^+$.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.379-392
• /
• 2019

The current study investigated the effect of Gabjubaekmok (Diospyros kaki) ethanolic extract (GEE) on $H_2O_2$-induced human neuroblastoma MC-IXC cells and amyloid beta $(A{\beta})_{1-42}$-induced ICR (Institute of Cancer Research) mice. GEE showed significant antioxidant activity that was evaluated based on ABTS, DPPH scavenging activity, and inhibition of malondialdehyde (MDA) and acetylcholinesterase activity. Further, GEE inhibited ROS production and increased cell viability in $H_2O_2$-induced MC-IXC cells. Administration of GEE ameliorated the cognitive dysfunction on $A{\beta}$-induced ICR mice as evaluated using Y-maze, passive avoidance, and Morris water maze tests. Results of ex vivo test using brain tissues showed that, GEE protected the cholinergic system and mitochondrial functions by increasing the levels of antioxidants such as ROS, mitochondrial membrane potential (MMP), and adenosine triphosphate (ATP) against $A{\beta}$-induced cognitive dysfunction. Moreover, GEE decreasd the expression levels of apoptosis-related proteins such as $TNF-{\alpha}$, p-JNK, p-tau, BAX and caspase 3. While, expression levels of p-Akt and $p-GSK3{\beta}$ increased than $A{\beta}$ group. Finally, gallic acid was identified as the main compound of GEE using high performance liquid chromatography.

• Korean Journal of Weed Science
• /
• v.1 no.1
• /
• pp.57-68
• /
• 1981

To clarify the mode of uptake of butachlor (2-chloro-2', 6'-diethyl-N-(butoxymethyl) acetanilide) by rice seedlings, its phytotoxic action to growth and physiological activities, studies were conducted with rice seedlings, at the 6th or 7th leaf-stage, which were treated with nutrient solution containing butachlor 0, 1.8, 3.6, 7.2, 10.8 or 14.4 ppm for 1, 2 or 4 days, in other case, the solutions were thereafter renewed with the untreated nutrient solution for further growth. Uptake of butachlor by rice seedlings increased linearly with increase of its concentration and duration of uptake. Butachlor inhibited root growth more than shoot growth, furthermore, the inhibitory effect on the shoot growth was greater in height than in weight or leafing rate. After 4 day-treatment, the rates of shoot growth in weight were delayed for 4 days. Butachlor inhibited water uptake rapidly and linearly with increase of its external concentration. The reduced uptake of water was followed by slow increase in the stomatal resistance of leaves. Upon completion of butachlor treatment, rate of water uptake was recovered rapidly, but the stomatal resistance with lag in time. Butachlor did not affect the uptake of cation such as ammonium, potassium and calcium, but inhibited substantially uptake of nitrate in proportion to its concentration. Especially, butachlor did not affect synthesis and degradation of nitrate reductase. In addition, butachlor has shown much greater binding to the lipidic substances from rice roots than the proteinous material. The primary mechanism of phytotoxic action of butachlor does not seem to be its effect on the protein synthesis, but great affinity to membranes. The inhibition of water uptake, and its subsequent closure of stomates is thought very important for reduced growth under mild phytotoxicity.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.113-117
• /
• 2016

Recently, hydrogen is regarded as important energy in the future, because it is clean and renewable. The photoelectrochemical (PEC) system, which produce hydrogen using water splitting by solar energy, is one of the most promising energy systems because it has abundant energy sources and good theoretical efficiency. GaN has recently been regarded as suitable photoelectrode that could be used to split water to generate hydrogen without extra bias because its band edge position include water redox potential ($V_{redox}=1.23$ vs. SHE). GaN also shows considerable corrosion resistance in aqueous solutions and it is possible to control its properties, such as structure, band gap, and catalyst characteristics, in order to improve solar energy conversion efficiency. But, even if the band edge position of GaN make PEC reaction facilitate without bias, the overpotential of oxygen evolution reaction could reduce the efficiency of system. One of the ways to decrease overpotential is introduction of co-catalyst on photoelectrode. In this paper, we will investigate the effect of manganese dioxide ($MnO_2$) as a co-catalyst. $MnO_2$ particles were dispersed on GaN photoelectrode by spincoater and analyzed properties of the PEC system using potentiostat (PARSTAT4000). After coating $MnO_2$, the flat-band potential ($V_{fb}$) and the onset voltage ($V_{onset}$) were moved negatively by 0.195 V and 0.116 V, respectively. The photocurrent density increased on $MnO_2$ coated sample and time dependence was also improved. These results showed $MnO_2$ has an effect as a co-catalyst and it would enhance the efficiency of overall PEC system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.4
• /
• pp.326-335
• /
• 1988

In order to increase the availability of filefish scrap, the ordinary and low salt sauce were prepared, and identified their taste compounds in their products. To process the filefish scrap sauce, chopped filefish scrap was mixed with koji, 25% brine, slat and glucose (25.0 : 65.0 : 12.5 : 7.0, w/w) and fermented at $25{\pm}4^{\circ}C$ for 120 days. The same process was also carried out to process the low salt sauce adding sorbitol, lactic acid and ethyl alcohol (7.0 : 0.7 : 9.0. w/w) instead of salt. While amino nitrogen and volatile basic nitrogen(VBN) of products were decreased, pH and reducing sugar were increased all alone the fermentation period. The major free amino acids of products at final stage of fermentation were glutamic acid, alanine, leucine, lysine and aspartic acid. And the contents of total amino acid in the ordinary and low salt sauce were 4126.6(mg/100m1 sauce), 4519.5(mg/100m1 sauce) after fermentation. Hypoxanthine was revealed as the major constituent among nucleotides and their related compounds through fermentation. Free amino acid-N in the filefish scrap sauces were from 56.3%(ordinary) to 60.7%(low salted) of extractive nitrogen. From the sensory evaluation, the quality of products from filefish scrap sauce were almost equal to sold soy sauce on the market.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.303-312
• /
• 1997

The massive, fractured and porous-type of glauconite, which is subdivided by surface morphology, occur in subtidal sand and semiconsolidated intertidal sand/mud from continental shelf of the southeastern Yellow Sea. This area is presumed to be a part of Holocene transgressive tidal systems tract. The glauconite, pellet-like grains with diameter of 0.1 to 1 mm, is scattered in surface sand sediments. Results of X-ray diffraction data of the minerals are monoclinic with $a=5.242{\AA}$, $b=9.059{\AA}$, $c=10.163{\AA}$, ${\beta}=100.5^{\circ}$, $V=474.53{\AA}^3$. Thermal treatments on the oriented glauconite increase the X-ray diffraction intensity near $10{\AA}$ (001), suggesting the presence of some expandable layers. Specific gravity of the glauconite is $2.60{\pm}0.45gm/cc$ on the basis of chemical composition and unit-cell dimensions. Based on $O_{10}(OH)_2$, chemical composition of glauconites, octahedral Fe content ranges from 1.19 to 2.06 atoms, corresponding octahedral AI is 0.18 to 0.76 atoms, which progressively substitute Fe for AI with increasing from porous to massive-type. The Mg content ranges from 0.35 to 0.54 atoms, and shows higher with increasing Al contents. A systematic increase of interlayer K from 0.34 to 0.71 is also observed with apparent increases from porous to massive-type, and related to a proportion of expandable layers. The clay preserved in glauconite, which is recognized as ordered/disordered (massive to fractured-type). The interstratified illite/smectite (porous-type), contains 7 to 27 % expandable layers. The glauconite seems to originate from post depositional authigenic growth in reducing environments promoted by the dissolution of clay minerals and biogenic debris.