• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.217-225
• /
• 2020

In recent years, the "social distance" has drastically reduced overseas travelers. On the other hand, for personal safety and security, it is expected that interest and demand for CCTV, electric alarm and signaling devices, electric diagnostics and medical devices will increase significantly. The purpose of this paper is to find out the effect of airport transfer passengers and exports of CCTV, electrical diagnostics and medical devices, electrical alarms and signaling devices on exports to Korea, and the synchronism of each variable. To this end, this study used a total of 231 monthly data from January 2000 to April 2020 in the National Statistics Service. As a result of empirical analysis, CCTV and electrical diagnostics and medical devices showed relatively high synchronization with respect to exports to Korea. Electric alarms & signaling devices and transit passengers also showed a certain level of synchronization with exports, but were relatively weak.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1069-1073
• /
• 2016

The current free-riding subway system for the elderly over 65 years old has been implemented since in 1980. As the aging population increases, the number of free riders also increases. It results eventually in the increase of subsidy from government. In addition, a transfer between subway and bus is not good enough since the free ride system is applied to only subway not to bus. The aim of this study is to analyze the transport card data to understand the impact of free-riding in the viewpoint of economic issues. It aims also to analyze the transfer patterns between public transport. At the end it compares Korea case with international cases and finds out some issues on free-ride systems. Finally, counter-measures aimed at improving the current free-rider system is suggested.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.67-83
• /
• 2018

This research is motivated by the question, "Where, when, and through what mode does an individual passenger moving within a subway station use to travel from starting to final destinations ?" To answer this, the stations passed by the individual passenger, the path taken, and modes used need to be known beforehand. In the metropolitan integrated public transportation fare system, Automated Fare Collection System(AFC) can be a source of information on transit modes, stations, and paths of individual passengers. AFC calculates a fare for the passenger based on travel data such as boarding and alighting stations, time, and mode used. In this research, an Selected Station Analysis(SSA) method, in which AFC data is used to observe passenger movement in the metropolitan public transportation subway station from the perspective of subway transfer stations, is proposed. SSA subdivides individual passenger movement in transfer stations and analyzes initial station/time and final destination station/time information using the trip chain perspective.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.233-243
• /
• 2008

Recognition for the importance and roles of public transportation is increasing because of traffic problems in many cities. In spite of this paradigm change, previous researches related with public transportation trip assignment have limits in some aspects. Especially, in case of multimodal public transportation networks, many characters should be considered such as transfers. operational time schedules, waiting time and travel cost. After metropolitan integrated transfer discount system was carried out, transfer trips are increasing among traffic modes and this takes the variation of users' route choices. Moreover, the advent of high-technology public transportation card called smart card, public transportation users' travel information can be recorded automatically and this gives many researchers new analytical methodology for multimodal public transportation networks. In this paper, it is suggested that the methodology for establishment of brand new multimodal public transportation networks based on computer programming methods using transportation card data. First, we propose the building method of integrated transportation networks based on bus and urban railroad stations in order to make full use of travel information from transportation card data. Second, it is offered how to connect the broken transfer links by computer-based programming techniques. This is very helpful to solve the transfer problems that existing transportation networks have. Lastly, we give the methodology for users' paths finding and network establishment among multi-modes in multimodal public transportation networks. By using proposed methodology in this research, it becomes easy to build multimodal public transportation networks with existing bus and urban railroad station coordinates. Also, without extra works including transfer links connection, it is possible to make large-scaled multimodal public transportation networks. In the end, this study can contribute to solve users' paths finding problem among multi-modes which is regarded as an unsolved issue in existing transportation networks.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.7-18
• /
• 2012

This study suggested a method of forecasting market-share of each mode after introducing new urban rail transit lines. The study reflected the observed market share of presently operating urban rail transit into forecasting process in order to improve accuracy in predicting market share of each modes. For more realistic representation of the forecasting model, we categorized O/D pairs according to attributes of trip distance, access time and number of transfers. The analysis results of traveler's mode choice behavior with observed data showed that the trip distances are longer, the share of urban rail tends to be higher, and that the number of transfers is fewer and the access times are lesser, the share of urban rail also tends to be higher. Then, incremental logit model was used in estimating mode choice probabilities for O/D pairs along with rail transit lines while utilizing observed market shares of each modes and differences in transit service level. As the next step, the market share of rail transit after introducing new rail transit lines was forecasted by using incremental logit model with the intial share values calculated the previous analysis step. It also reflected changes in level of service for automobile in highway due to changes in highway systems and changes in mode shares after introducing new lines of rail transit. It can be expected that the proposed method would more realistically duplicates phenomena of mode choice behavior for rail transit and that it would be more theoretically logical than the typical existing methods using SP data and incremental logit model or using addictive logit model in this country.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.7-19
• /
• 2010

Users of metropolitan railroad is increased continuously because of its various advantage such as comfortableness, convenience and punctuality. Thus, several local government including Seoul considered new installation or extension of railroads and four railroad operators maintain seventeen lines at present. After public transportation reforms in 2004 and integrated discount fare system in 2007, public transportation become more convenient in many aspects. However, these trials gives much more complex allocating problems of revenues among public transportation operators. In this paper, we deal with revenue allocating problems among public transportation operators after integrated discount fare system in 2007. Specifically, this study focuses on allocating revenues to metropolitan railroad operators by using RF card data. This research roughly proposes the methodology of O/D extraction from RF card data, generalized cost estimation and allocating revenue algorithm. We use RF card data in order to draw out exact individual O/D data and try to compare our results with those of Korea Smart Card Company. In generalized cost estimation, survey study about transfer factors is conducted for accurate estimation of generalized cost function. Lastly, new allocating revenue algorithm using k-path and non-dominated path concept is suggested. It is expected that case study is also performed with real revenues and O/D data in order to check up the application. Preposed methodology in this research can contribute to solve present and future revenue allocating issues according to the introduction of LRT and private railroad.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.629-636
• /
• 2017

Urban railway are the most widely used means of transportation in the metropolitan area. It is difficult to draw out problems through the quantitative analysis technique because most of the research results show that most of the guide signs are installed with many or few guide signs. In this study, we propose a method to evaluate the information load and proper installation location at the main decision point in the transfer passageway for Suseo Station by applying Positive Guidance. As a result of analyzing the information load using this technique, it is suggested that the necessary information should be provided centered on the copper node because it provides confusion of the users by providing the same information in the transfer line. It is necessary to obtain guidance on how to remove the sign (advertising, high ceilings, etc). The study will be regarded as a key for the basis and placement of the guidelines for determining the appropriateness of the in the future urban railway station sign guide.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.121-132
• /
• 2007

This paper addressed the issue of a generalized cost model for transit assignment. The model composed of walk time, waiting time (including transfer waiting time), line-haul time, transfer walk time, and fare. The weights of each component were supposed to be calculated using the stated preference (SP) data, which were collected prudently in order to reflect reality. The marginal rate of substitution and wage rate were applied to calculate the weights. The results showed that the weight of walking time per in-vehicle travel time (IVTT) was 1.507, the weight of waiting time (per IVTT) was 1.749, that of transfer time (per IVTT) was 1.474, and that of fare (per IVTT) was 1.476 for trips between inner-city areas in Seoul. Weights for each component were identified as 1.871, 1.967, 1.015, and 0.857, respectively, for trips between Seoul and Gyeonggi. Statistical significance existed between two cases and each variable was also statistically significant. Transit assignment using the relative weights estimated in this study was implemented to analyze the travel index in a macroscopic and quantitative basis. The results showed that average total travel times were 30.23 minutes and 63.29 minutes and average generalized costs were 2,510 won and 3,880 won for trips between inner-city areas in Seoul and between Seoul and Gyeonggi, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.64-79
• /
• 2023

This study reviewed the process of applying the Monte Carlo simulation technique to the traffic allocation problem of metropolitan subways. The analysis applied the assumption of a normal distribution in which the travel time information of the inter-station sample is the basis of the probit model. From this, the average and standard deviation are calculated by separating the traffic between stations. A plan was proposed to apply the simulation with the weights of the in-vehicle time of individual links and the walking and dispatch interval of transfer. Long-distance traffic with a low number of samples of 50 or fewer was evaluated as a way to analyze the characteristics of similar traffic. The research results were reviewed in two directions by applying them to the Seoul Metropolitan Subway Network. The travel time between single stations on the Seolleung-Seongsu route was verified by applying random sampling to the in-vehicle time and transfer time. The assumption of a normal distribution was accepted for sample sizes of more than 50 stations according to the inter-station traffic sample of the entire Seoul Metropolitan Subway. For long-distance traffic with samples numbering less than 50, the minimum distance between stations was 122Km. Therefore, it was judged that the sample deviation equality was achieved and the inter-station mean and standard deviation of the transport card data for stations at this distance could be applied.