• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.2
• /
• pp.332-342
• /
• 2012

The current research aims at classifying the bus stops as transfer center in order to establish the rational bus transfer systems. Existing research typically identifies characteristics of demands for bus stops and land use surrounding the bus stops and classifies and profiles the bus stops. A common problem with this type of research is that the results with cross-sectional characteristics of land use and bus stop usage do not capture the details of trip chain, the fundamental characteristics of the trips with transfer. This paper therefore examines bus stop classifications with such variables as transport mode chains, intermediate stop chains and timing chains. The analysis on the data collected on Monday 20 April 2009 for passengers of Gyeong-gi bus results in a clear classification among bus stops in terms of such trip chain variables. The research would provide useful information for the decision support of transfer stops location choice and infrastructure design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.597-604
• /
• 2009

The mass transit networks in Korea, such as buses, metro and subway, are co-related and the number of transfer points, in which a lot of pedestrian movement is generated, are rising. The functions of the transfer centers, in which several travel modes cross at a point, have to include convenience and comfort for pedestrians using the transfer centers, and such functions can make transit a more attractive travel option and thus eventually contribute to increases in ridership. However, the guidelines for station layouts and their assessments in transfer stations are not suggested so far. So the pedestrian pattern data (pedestrian walking distances and times, pedestrian approaching distances and times, pedestrian walking paths in the inside of stations) was collected and analyzed. Based on the results of the analysis, the ways to measure the quality of comfort for those who using transfer facilities were suggested using the times that pedestrians consume to transfer from a travel mode to another. The walking time of pedestrians at the inside of stations was also measured by pre-selected pedestrian pathways as the guidelines for station layout assessment in transfer facilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.24-35
• /
• 2011

This paper demonstrates a methodology of integrated operation and management system for intermodal connectivity center (ICC), which is planning to be build up as a large scale public transit facilities for green growth strategy by the national government. The ICC needs to be capable of providing the integrated location based information for the public transit users in terms of collaborating a variety of transit modes and complex facility in a large scale center. Recently, the upcoming information and communication technologies enable to come up with real time information provision on nomadic and portable devices, i.e. smart phones and/or tablet PCs, as what the users actually need to get on demand. In order to provide the public transit users in ICC with the integrated information on their smart phones for example, the integrated operation and management system plays a key role to collect the data utilizing the wireless communication with real time location tracking and to manage them to be effective and operational sources for applicable personalized services. Thus, this paper defines a type of services, subsystems, and relevant technologies for the system integration so called a "Smart Garatagi Service" and shows a filed test demonstration case in the existing airport terminal, Gimpo Domestic.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.85-98
• /
• 2010

As transit networks are becoming more multimodal, the concept of connectivity of transit networks becomes important. This study aims to develop a quantitative model for measuring the connectivity of multimodal transit networks. To that end, we select, as evaluation measures of a transit line, its length, capacity, and speed. We then define the connecting power of a transit line as the product of those measures. The degree centrality of a node, which is a widely used centrality measure in social network analysis, is employed with appropriate modifications suited for transit networks. Using the degree centrality of a transit stop and the connecting powers of transit lines serving the transit stop, we develop an index quantifying the level of connectivity of the transit stop. From the connectivity indexes of transit stops, we derive the connectivity index of a transit line as well as an area of a multimodal transit network. In addition, we present a method to evaluate the connectivity of a transfer center using the connectivity indexes of transit stops and passenger acceptance rate functions. A case study shows that the connectivity evaluation model developed in this study takes well into consideration characteristics of multimodal transit networks, adequately measures the connectivity of transit stops, lines, and areas, and furthermore can be used in determining the level of service of transfer centers.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1308-1317
• /
• 2009

The mass transit networks in Korea, such as buses, metro and subway, are co-related and the number of transfer points, in which a lot of pedestrian movement is generated, are rising. The functions of the transfer centers, in which several travel modes cross at a point, have to include convenience and comfort for pedestrians using the transfer centers, and such functions can make transit a more attractive travel option and thus eventually contribute to increases in ridership. However, the guidelines for station layouts and their assessments in transfer stations are not suggested so far. So the pedestrian pattern data (pedestrian walking distances and times, pedestrian approaching distances and times, pedestrian walking paths in the inside of stations) was collected and analyzed. Based on the results of the analysis, the ways to measure the quality of comfort for those who using transfer facilities were suggested using the times that pedestrians consume to transfer from a travel mode to another. The walking time of pedestrians at the inside of stations was also measured by pre-selected pedestrian pathways as the guidelines for station layout assessment in transfer facilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.11-15
• /
• 2010

It is necessary to improve transfer impedance of Urban Rail Station station users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in Urban Rail Station stations and calculated transfer impedance on major Urban Rail Station stations in Korea. The study results show that the addition of 100 meter exterior walking distance increases 2 minute travel time, 100 meter interior walking distance increases 3 minute travel time, 100 stairways increase 4 minute travel time, and escalators decreases 1 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different Urban Rail Station stations and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.17-23
• /
• 2009

Due to the rapid increase of vehicles on the street, Korean society is facing worsening traffic congestions and air pollutions. Also, the oil price pickup has led to increasing need for the use of public transportation. In particular, transfering among public transportation may be a main factor for riders who are commuting for a long distance journey. In order to ensure such connectivity, transfer stations have been actively built in Korea. However, it would be necessary to shift those vehicles, from cars to public transportations by enhancing the users' satisfaction with public transportation through strategies for minimizing the users' waiting cost by building an efficient connective system between transportation modes as well as the preparation of aforementioned transfer stations. Therefore, this study aimed to develop an algorithm for minimizing transferring passengers' waiting costs based on service intervals of linked buses within the transfer facilities. In order to adjust the service interval, we calculated the total costs, involving the wait cost of transfer passengers and bus operation costs, and produced an allocation interval, that would minimize the costs. We selected a KTX departing from Seoul station, and a No. 6014 bus route in Gwangmyeong city where it starts from the Gwangmyeong station in order to for verifying the model. Then, the transfer passengers' total waitting cost was reduced equivalent to the maximum of 212 minutes, and it revealed that the model performed very effectively.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.169-177
• /
• 2009

Establishing a public transportation transfer system that can reduce personal automobile use in the CBD and absorb the demand, thereby reducing congestion, is a necessity. However, the current transfer system and facilities are lacking in intermodal connectivity, require long transfer times, have complex flow patterns, and are lacking in information systems and convenience. The design analysis program of this study is to develop a program that executes computations of design analysis of transfer facilities by utilizing the existing design standards for facilities such as facilities for boarding and alighting, elements for convenience, and pedestrian facilities. Developing an analytical tool through which individual or integrated design analysis can be conducted on the design standards of various facilities is an important study for improving the work accuracy and efficiency of designing an actual transfer center.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.52-58
• /
• 2013

This study discusses how transportation to connect railway stations in Korea's small and medium-sized cities can be improved, based on analysis of a survey on the Joongang Line. The analysis considered current problems in connectivity between parts of the Korean transportation system and suggests how to encourage more passengers to shift from private cars to railways. It was found that railway users in small and medium-sized cities hope for better connection between different modes of public transportation, especially for urban buses. However, there is not enough connectivity currently available; therefore it is crucial to establish a system of such connections, mainly focusing on urban buses. Furthermore, in order to minimize transfer distances and connect various transfer modes, plans for improvements of facilities are needed and governmental support should be provided.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.533-538
• /
• 2008

The introduction of KTX (Korea Train Express) has brought an historic change to the overall transit system in Korea. The high-speed railway stations in particular are expanding the scope as public transit centers. However, it is evident that the evaluation on the high-speed railway stations had not been performed successfully thus far. The most important element of the evaluation is the connectivity of the departure point to the arriving stations and also the internal transfer service stations. We developed the service evaluation indicators of transfer facilities in the high-speed railway stations. The indicators are comprised of the level of service (LOS), the propriety of allocation, and the quality of information throughout the facilities in the centers. We examined the 7 stations in Korea that are currently in operation and standardized the methodology of the evaluation process by applying the indicators suggested in this study.