• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.391-394
• /
• 2000

Girdling and girdling+pinching treatments on 'Sekaiichi' apple remarkably reduced June drop and accelerated fruit growth in early stage of fruit development. Girdling+pinching and pinching reduced bourse shoot growth compared with non-treated control. There were no significant differences in flower bud formation in the following year among treatments. It was assumed that the optimum period for girdling is between 5 days before full bloom and full bloom period.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.160-168
• /
• 1982

수평으로 놓여진 2개의 동심타원 사이의 환상공간에서의 자연대류현상이 수치계산 및 실험적으로 연구되었다. 수치적 연구는 정상 2차원 층류유동영역에서 수행되었으며 유선 및 등온선이 구하여 졌다. 또한 특수한 경우로서 수평동심원 사이의 환상공간에 관한 기존연구와 비교하여 좋은 일치 를 보았다. 실험적 연구에서는 3개의 실험모델을 제작하였으며 마하젠더 간섭계에 의한 간섭사진 으로부터 등온선 분포를 얻었으며 아울러 유동에 관한 정보도 얻을 수 있었다. 실험과 수치계산 결과는 상당히 좋은 일치를 보였으며 기존 동심원환상공간에 편심율이 추가된 이론전개 및 수치 계산방법의 적합성을 알 수 있었고 이로서 환상공간에서의 자연대류에 관한 연구를 확장시켰다.

• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.81-86
• /
• 2011

The effects of girdling on fruit quality and cold resistance of 'Kyoho' grapes were investigated. Girdling treatment was conducted on the trunk at 10 cm above ground with 1 cm width and grapes were harvested at 90 and 110 days after full bloom to compare the fruit quality. First harvesting rate in girdling treatment was higher than that in non-girdling treatment and coloration was also higher in girdled vines at the final harvest. In other words, coloring process of grape was promoted and enhanced by girdling, but this effect of coloring improvement was decreased after successive girdling treatment. Fruit quality showed no difference between the treated and non-treated berries, but fruit cracking rate was lower in girdled treated berries. Girdled trees were weakened and suffered from freezing damage. Especially, most grapevines withered up after being girdled for three consecutive years. Although girdling had effect on improving the berry coloring significantly, the effect wore off with continuous girdling. And it was possible that consecutive girdling leaded to wither and growth suppression especially in grapevines. These adverse effects may make the continuous girdling technique unsuitable in practice for 'Kyoho' grape.

• Journal of Yeungnam Medical Science
• /
• v.5 no.2
• /
• pp.53-58
• /
• 1988

KOH examination is a simple, rapid and diagnostic procedure to confirm dermatophytic infections. It is important to select a proper examination site of the lesion. To determinate the proper examination site of the lesion, mycologic studies were done with multiple specimens collected from the center, margin and out of margin of the ring-shaped dermatophytotic skin lesion on the 58 patients. The results were as follows. Positive rate of KOH wet smear was 94.8% at the center and 100% at the margin of the lesions, 22.4% at the 1cm and 5.2% at the 2cm out of the lesions. The more hyphae were found in the lesion, the more hyphae were found out of the lesion. Culture was done on the Sabouraud's glucose agar from the highest KOH positive area and the positive culture was 48 strains(82.8%) of 58 patients. These findings suggested that the ring-shaped active margin was the best site to examine mycologic studies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.153-160
• /
• 1989

A numerical and experimental study has been performed on natural convection heat transfer from a horizontal annulus with spacers. The mode of heat transfer in the annulus is changed from conduction to convection at Ra = 10$^{3}$. By increasing wall conductivity, mean Nusselt number is apparently increased at $K_{w}$/K$_{f}$ .leg. 48, but at /K$_{w}$/K$_{f}$ > 48, slightly increased for no spacers, and decreased for vertical spacers and horizontal spacers. The mean Nusselt number can be represented in an exponential function of Grashof number at all conditions. The characterics of natural convection heat transfer show similiarity for no spacers and vertical spacers but show difference for horizontal spacers. The presence of the horizontal spacers increased the convective heat transfer by an average 6 percent over that for the no forced cooling to outer cylinder. The maximum local Nusselt number appears at .theta. = 150.deg. in a conducting tube and .theta. = 30.deg. in an outer cylinder for vertical spacers, and appears at .theta. = 180.deg. in a conducting tube and .theta. = 0.deg. in an outer cylinder for horizontal spacers.spacers.

• The Korean Journal of Ecology
• /
• v.22 no.3
• /
• pp.101-108
• /
• 1999

This survey was performed from March 1993 to March 1998, in order to clarify the relationships between water quality and topographical factor. The study sites were two reservoir basins; Kaesim and Jangchan in Iwon-myon, Okchon-gun, Chungcho'ngbukdo Province. Basin shape factors of Kaesim reservoir were at 0.030∼0.210 (mean value 0.090), those of Jangchan reservoir were at 0.217∼0.452 (mean value 0.325). The mean basin shape factor of Jangchan reservoir was 3.61 times larger than that of Kaesim reservoir because its stream width was narrower and mean stream length was shorter. In the correlation between distance from the source of stream (L) and basin area (A), Iwonchon basin was calculated as L=1.44A/sup 0.6/. Circularity ratio was 17.114 in Kaesim (22% of Kum River), and 7.444 in Jangchan. Elongation ratio was 0.357 in Kaesim, 0.636 in Jangchan and 0.282 in Kum River. Precipitation summation period of Jangchan was 1.54 times slower than that of Kaesim. Rainfall reaching time in each small basin was 337.53 min. in A'(Jangchan-ri) basin of Jangchan and 49.26 min in H (Iwon-ri) basin of Kaesim. In the relationship between watershed frequency (Df) and drainage density (Dd), the regression equation was Df=0.023Dd² in Kaesim and Df=0.189Dd² in Jangchan reservoir. As slope degree increased, DO became higher (Y/sub DO/=0.19X＋6.5927, r=0.8l), but COD(Y/sub COD/=-0.2092X＋9.7104, r=0.52) became lower. Total nitrogen was increased with the increase of basin shape factor and circularity ratio. Ratio of B/sub OD/ to COD was 1/1.2(Y/sub BOD/ = 1.2984 X/sub COD/-3.2004, r=0.9l).

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.96-110
• /
• 1997

The Wondong Caldera, formed by the voluminous eruption of the rhyolitic ashflows of the Wondong Tuff which is about 1,550 m thick at the intracaldera and 550 m at the outflow, is a resurgent caldera which shows a dome structure on the central exposure of the caldera. The Wondong caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which rhyolitic magma was ejected, as small fallouts and voluminous ash-flows, to form the Wondong Tuff. The explosive eruptions began with ash-falls, progressed through pumice-falls and transmitted ash-flows. During the ash-flow phase the initial central vent eruption transmitted into late ring-fissure eruption which accompanied with caldera collapse. Contemporaneous collapse of the roop of the chamber resulted in the formation of the Wondong Caldera, a subcircular depression subsiding about 1,930 deep. Following the collapse, quartz porphyry was intruded as ring dykes along the ring fracture near the southwestern caldera rim. Subsequently the central part of the caldera floor began to be uplifted into a circular resurgent dome by the rising of residual magma. Concurrent with the resurgent doming, the volcaniclastic sediments of Hwajeri Formation were accumulated in the caldera moat and then rhyodacite lava erupted from the initial central resurgent dome and another ash-flow tuff from the northern ring fracture. After the sedimentation, the find-grained granodiorite was intruded as an arc along the eastern ring fracture of the caldera. Finally in the central part, the resurgent magma was emplaced as a hornblende biotite granite stock that formed the central dome.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.300-305
• /
• 2013

Part shrinkage in injection molding is inevitable phenomenon. Thus, it is necessary not only study on the reducing part shrinkage but characterization of part shrinkage. In this study, part shrinkage in injection molded 2.5 dimensional annular shaped specimens has been studied using glass fiber reinforced PC. Annular shaped specimens were designed with various sizes of outer diameter and thickness. Injection temperature, packing time and packing pressure were selected for operational conditions. Profile variations of outer and inner diameters of molded specimens for various operational conditions were investigated. Sizes of outer and inner diameters of injection molded specimens were smaller than the sizes of mold. Part shrinkage decreased as outer diameter and thickness increased. Part shrinkage showed anisotropic behavior and it depended upon gate location. Subsequently, molded specimens were not circular but oval in shape, and showed the largest shrinkage in the direction of gate. It was realized that the mold design such as gate design is important to control the shape of molded products.

• The tire
• /
• s.70
• /
• pp.12-16
• /
• 1977

전보에서 천연고무 가유물의 내산화성에는 가교형태의 비율과 결합촉진제나 환상설피드 등이 영향하고 있음을 명백히 했다. 본고에선 OBS/유황계에 대해서 열이력을 부여했을 경우 내산화성에 여하한 영향이 나타나는가를 보았다. 결국 가유시간, 열이력전후 및 망목밀도에 의한 내산화성의 영향을 검토했다. 그 결과 내산화성에 대해서 최적가유시간의 존재가 확인되었다. 이것은 열산화에 대해서 가교형태에 보다 안정된 비율이 존재한다고 추찰되었다. 또 질수중에서의 열이력의 영향에 대해서는 유황의 고비율에서는 내산화성은 양호하게 되며 OBS의 고비율에선 나빠졌다. 전자는 Sp량의 감소, 후자는 결합촉진제의 유리떄문에라고 생각된다. 망목밀도에 대해서는 산소흡수속도와 직선관계이었다.

• Korean Journal of Social Welfare
• /
• v.56 no.2
• /
• pp.215-235
• /
• 2004

A little understood but rapidly growing phenomenon in our society is remarriage. By 2002, 21% of marriage involved the remarriage of one or both partners. Furthermore, the ratio of remarriage of women has outnumbered the ratio of remarriage of men, which is remarkable change compared to the traditional culture putting a taboo on women's remarriage in Korea. The purpose of this study is to construct the perspective and the direction of programs for enhancing the remarriage family functioning. For the purpose, we explore the intrinsic vulnerability to family dissolution of remarriage and ill preparation for remarriage of people. There are unrealistic myths around, lack of informations on, absence of guideline for remarriage family life. Also, we discuss the process of remarriage family development, which leads us to the conclusion that the remarriage shows totally different family structure and family interaction from first marriage nuclear family. Based on discussion mentioned above, several suggestions are provided for developing programs for remarriage family functioning. Above all, the family developmental perspective on remarriage is more useful paradigm rather than deficit-comparison perspective for remarriage family. Also, the programs for remarriage family functioning should challenge the unrealistic myths around remarriage such as the instant love between step-parents and step-children, the re-created nuclear family, etc. Also, several points such as the remarried family developmental stage, the disparity in expectation of man and woman on remarriage, and the tendency to scapegoat a stepmother should be considered in programs for enhancing remarriage family functioning.