• Clean Technology
• /
• v.10 no.2
• /
• pp.53-59
• /
• 2004

Direct methanol fuel cells (DMFC) are presently paid attention due to their higher energy density and portability. In order to slove problems such as high anodic overpotential and methanol crossover in DMFC, an analytical analysis for electrochemical model using Tafel equation and limiting current density was performed. Change of operational parameters such as temperature, transfer coefficients and membrane thickness results in helpful informations on voltage-current curves.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2006

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, biomass and spent plastic. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. Therefore, it is considered as an excellent substitute fuel for LPG, fuel cells, power plant, and especially diesel and is expected to be the alternative fuel by 2010. The experimental study of the direct synthesis of DME was investigated under various conditions over a temperature range of $220{\sim}280^{\circ}C$, syngas ratio 1.2~3.0. All experiments were carried out with a hybrid catalyst, composed of a methanol synthesis catalyst ($Cu/ZnO/Al_2O_3$) and a dehydration catalyst (${\gamma}-Al_2O_3$). The observed reaction rate follows qualitatively a Langmiur-Hinshellwood model as the reaction mechanism. Such a mechanism is considered with three reactions; methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol, and water, individual reaction rate was determined.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.03a
• /
• pp.123-134
• /
• 2004

연로로부터 화학에너지를 직접 전기에너지로 바꾸는 연료전지(Fuel Cells)중 고체형 고분자 전해질 연료전지(Polymer Electrolyte Membrane Fuel Cell: PEMFC)와 직접 메탄올 연료전지(Direct Methanol Fuel Cell: DMFC)는 효율이 높고, zero emission 가능성으로 차세대 수송용 전원으로 각광받고 있는 미래 환경친화적 에너지원이다. 수소와 산소(또는 공기)와의 반응을 이용한 것이 PEMFC이고, 수소를 연료로 쓰지 않고 액체상 메탄올을 직접 연료로 사용하는 것이 DMFC이다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.481-481
• /
• 2022

본 연구에서는 기후 변화 완화에 대한 잠재력을 평가하기 위해 국내에서 가장 우세한 소나무 종인 Pinus densiflora의 기후변화에 대한 반응을 평가하였다. 기후변화의 시나리오로 4가지 대표 농도경로(RCP)에 기반 하여 CO₂, 강수량, 온도의 변화를 개별 및 조합하였다. 생태수문학적 및 지구화학적 모델인 ecosys를 활용 및 보완하여 광릉 시험림에 적용하였다. 본 연구에서는 대기 중 CO₂ 증가가 총일차생산량(GPP)과 순일차생산량(NPP)에 미치는 긍정적인 영향이 강수량과 기온 변화로 인한 부정적인 영향보다 더 큰 것으로 나타났다. 특히, 기준 시나리오와 비교하여 각각 RCP2.6, 4.5, 6.5, 8.5에서 3.79%, 13.44%, 18.26%, 28.91%의 NPP 개선이 모의되었다. 또한, 본 연구에서는 지표하 질소 유출과 지표 N₂O 플럭스가 기후 변화가 심해짐에 따라 소나무 생장 향상 및 토양 수분 저하로 인하여 토양 질소 손실 감소가 모의되었다. 기후변화의 강도가 증가함에 따라 증발산량이 증가하였지만, 기공 감소는 토양에서 흡수하는 물이용 및 광합성 효율 증진을 가져왔다. 이러한 결과는 소나무가 기후 변화를 완화하는 환경 친화적인 선택으로 작용할 수 있는 잠재성을 나타낸다.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.179-184
• /
• 2008

The separation and purification of succinate are necessary for the succinic acid production by a fermentation process. Among the purification processes, desalination of succinate is inevitable. In this work, electrodialysis was selected as a desalination method and its operating parameters affecting the degree of desalination and energy consumption were examined. Commercialized electrodialysis apparatus was used in this work and its optimum operating parameters were determined by using design of experiment (DOE) method. Voltage, concentration of succinate, and pH were selected as main parameters. Among them, voltage seemed to be the most important one. The final conversion of succinate to succinic acid was calculated when the operating parameters were optimized. Finally, the effect of impurities, such as corn steep oil, yeast extract, and dextrose on the electrodialysis efficiency was also studied.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.50-55
• /
• 2024

Hydrogen is attracting much attention as a renewable energy source with high energy density and environmental friendliness. Among various hydrogen production methods, water electrolysis stands out as a clean hydrogen production technique that could lead the future of hydrogen production, as it does not emit carbon, and many studies are currently underway to realize this technology. However, the high overpotential, which increases the cost of hydrogen production, acts as a stumbling block, making the development of electrocatalysts extremely important. This paper aims to summarize and introduce recent research trends in the development of electrocatalysts for hydrogen evolution reaction and oxygen evolution reaction through interfacial engineering, and to deeply discuss the challenges in implementing next-generation water electrolysis devices.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.114-120
• /
• 2006

Bismuth vanadate is one of the environmentally benign substitutes for conventional inorganic pigments composed of heavy metals. The effect of process parameters on the physical properties of bismuth vanadate pigment prepared from aqueous solutions of potassium vanadate and bismuth nitrate were experimentally examined. Two aqueous solutions were fed into precipitation chamber at the same flow rate, and precipitates were formed at primary pH of 4.5 and secondary pH of 7.0~7.5. After aging for 3 hours in reaction mixture, 3 hours' calcination at $400^{\circ}C$ gave bismuth vanadate pigment with a good color and hiding power. Increase in molybdenum concentration in reaction mixture increased the hiding power of the pigment, but the other minor constituents had minor effect on the physical properties of the pigment.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.128-131
• /
• 2015

Hydration of nitriles in the environmentally benign neutral conditions is the most economical and attractive way to produce amides. Substantial research works have been carried out to apply the solid metal oxides and transition metal supported catalytic systems to promote the hydration of nitriles. The most significant feature of these catalysts is the applicability to a wide range of substrates including aromatic, alicyclic, hetero-atomic, and aliphatic nitriles. These catalysts are also characterized by the easy isolation from the reaction mixture and the reusability while maintaining the high catalytic activity. This review accounts over the detailed survey of the metal oxide and solid supported metal catalysts for preparing amides from the hydration of nitriles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2005-2009
• /
• 2008

하천수변조사는 하천수변의 물리 화학 생물학적 특성 파악과 이들의 상호 연관성 및 변화양상을 분석하기 위한 기초자료 수집과정이다. 하천수변조사는 치수 및 이수기능뿐아니라 하천환경 기능을 보전, 재생 및 복원시키고자 하는 하천정비사업에 이용되고 있으며, 이에 따라 하천정비기본계획, 하천환경정비사업 등에서 많은 조사가 이루어지고 있다. 그러나 수집된 자료의 형태가 대부분 도면이나 이미지 형태로 관리되고 있어 향후에 수변의 변화 상태를 갱신하기가 어려운 실정이다. 본 연구에서는 행정중심복합도시 권역내의 국가하천, 지방하천, 소하천을 대상으로 하천수변조사를 실시하였으며 조사결과의 체계적 관리를 도모하기 위하여 하천수변조사지도 DB 구축과 이를 관리할 수 있는 시스템을 개발하였다. 본 연구의 성과는 단기적으로는 하천환경정비시 보전 및 복원 방향의 설정, 하천의 현재 상황을 파악하고 이를 공사 진행에 반영, 공사 과정 중에서 하천의 반응상태를 파악하여 사업진행이나 방식을 개선하는데 활용될 수 있다. 장기적으로는 행정중심복합도시 조성 전후의 하천환경 및 생태변화상을 제공할 수 있고 자연친화적인 하천환경 관리를 위한 하천환경정보를 제공할 수 있다.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.216-221
• /
• 2022

Biocompatible polysaccharide coating technology can be a promising solution to overcome unexpected diseases caused by inflammatory reactions of metallic biomaterials (e.g., stent restenosis, etc.). However, due to their inherent hydrophilicity, it is difficult to maintain the coating layer for a long time in the physiological wet-environment. Herein, catechol functionalized hyaluronic acid was synthesized and introduced to the polymeric stent (polylactic acid) as the adhesive biocoating material. Surprisingly, even with the low degree of substitution of catechol (1.26%), a significant improvement in the underwater stability was observed, confirmed by capillary experiments and spectroscopic analysis. Our results may provide an insight into the positive role of catechol molecular adhesive group in the in-vivo stability of biocoating materials.