• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.142-149
• /
• 2002

With rapid industrial development, a railway has become a main traffic means. But, the railway noise has caused much annoyance for the residents living nearby railway tracks. Therefore, execute regulation standard of railway noise has established for quite dwelling environment from January 2000. However efficient soundproofing measures are very difficult because of the lack of basic data and insufficiency of the existing research. In this point, this study attempts to survey the characteristics of attenuation and propagation of railway noise. And this study intends to get the basic data for establishment of a standard for domestic railway noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.678-678
• /
• 2009

환경 소음,진동 개선의 측면에서 철도 레일 하부로 전달되는 진동 및 구조소음을 효과적으로 차단하기 위하여 국내에서도 탄성지지 구조의 플로팅 슬라브를 적용하는 경우가 증가하고 있다. 플로팅 슬라브 구조설계에 있어 주안점은 슬라브 자체 중량에 비하여 열차 중량과 열차 주행간에 발생하는 동하중이 2$\sim$3배 이상 높아 열차 주행 안정성을 고려해야 하는 점이며 열차의 고속화 경향에 따라 동하중의 증가는 더욱 커지고 있다. 특히, 열차의 구조 동특성과 동하중의 주파수 특성을 고려할 경우 슬라브 구조의 동적 설계변수(고유진동수, 감쇠비 등) 결정이 매우 제한되고 있음을 고려하면 탄성지지부의 감쇠 및 강성의 가변 특성의 부여는 매우 중요하다 할 수 있다. 본 연구에서는 MR 댐퍼와 MR 방진고무 등의 반능동 소재를 사용하여 열차 주행간에 발생하는 탄성지지 슬라브의 진동을 제어하는 시뮬레이션을 수행함으로써 적용 가능성을 확인하고자 한다.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.133-139
• /
• 1997

The noise generated from a treadband mechanism of a tire has been the subject of this research. In particular, the treadband has been treated as an infinite tensioned beam resting on an elastic foundation which includes damping. The main objective is to predict the sound power generated from a system mentioned above by locating harmonic point forces representing the excitation of treadband at the contact patch. It is possible to predict the sound power radiated from this structure by using wavenumber transformation techniques. In order to find out the minimum radiated sound power, All parameters were varied. Thus, this model can be used as a tire design guide for selecting parameters which produces the minimum noise radiation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.306-315
• /
• 2010

As developing the large-scale offshore wind farm is expected, the preliminary environmental impact assessment is very essential. In this study, the wave hindcast model is verified based on observed data at the coast around Wido which is among the candidate sites for developing the offshore wind farm. In addition, the effect of the wind turbine foundations on wave height is analyzed when total 35 wind turbines including monopile foundations of 5 m in diameter are installed. Calculation result of significant wave height is in good accord with observed data since the RMS error is 0.35 m. Moreover, it is found that the presence of the wind turbine foundations hardly affects wave height as wave damping ratio is less than 1%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.237-237
• /
• 2022

우리나라 하천 내에 설치된 횡단구조물은 보 35,000개소 이상으로 전국 하천의 0.6 km마다 수공구조물이 위치해 있으며 이로 인해 종적(longitudinal) 연결성에 영향을 미치는 것으로 나타났다. 농어촌연구원의 조사에 따르면 하천 횡단구조물이 설치된 구간에 어도 설치율은 14.9%로 나타났으며 이는 수생태 관점에서 연속성이 매우 열악한 상태임을 확인 할 수 있다. 이에 우리나라 각 부처 국토교통부, 환경부 등에서는 수생태 연속성을 확보하고자하는 노력이 지속되고 있으며 대표적으로 어류의 이동통로인 어도를 설치하거나 기존 어도의 효율을 향상시키기 위하여 개보수 작업을 지속적으로 실시하고 있다. 어도의 기능을 평가하기 위해서는 어도 내의 수리특성을 정확히 파악하는 것이 중요한데 연속적인 구조물로 구성된 어도 내 흐름은 매우 복잡하다. 특히 어도 내 구조물간 상호작용에 의하여 비정상 흐름이 발생하며 구조물 뒤에서는 사수역(dead zone)이 형성된다. 사수역에서 나타나는 와류의 거동은 구조물의 기하학적 특성에 따라 변화한다. 본 연구에서는 2차원 수심적분 수치모형을 활용하였으며 벽면 근처 점성저층의 유속분포을 재현하기 위하여와 점성항에 감쇠함수(damping function)를 고려하였다. 수치모형의 검증을 위해 실내 실험수로의 직선 개수로에서 PIV(particle image velocimetry)를 활용하여 연속적으로 배치된 구조물에 의한 유속자료를 활용하였다. 이 결과는 향후 새로운 어도설계 혹은 기 설치된 어도의 수리학적 기능을 평가하는데 활용이 가능할 것으로 보인다.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.30-34
• /
• 2007

The Channel environment is poor in the power line communication because power line proposed power supply use a communication medium. In this paper, we designed gate drive circuit used coupler reducing the signal diminution for the good communication. We analyzed receiving and transmitting operation of the coupler and designed the drive circuit with the suitable impedance. As a result, we improved the environment of impedance variation due to the inter reaction of many electron products. So, to improve BER(45%) enabled us to communicate smoothly in power line communication.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.111-120
• /
• 2017

In this paper, we propose novel feature extraction algorithm for classification of seabed sediment. In previous researches, acoustic reflection coefficient has been used to classify seabed sediments, which is constant in terms of frequency. However, attenuation of seabed sediment is a function of frequency and is highly influenced by sediment types in general. Hence, we developed a feature vector by using attenuation variation with respect to frequency. The attenuation variation is obtained by using reflected signal from the second sediment layer, which is generated by broadband chirp. The proposed feature vector has advantage in number of dimensions to classify the seabed sediment over the classical scalar feature (reflection coefficient). To compare the proposed feature with the classical scalar feature, dimension of proposed feature vector is reduced by using linear discriminant analysis (LDA). Synthesised acoustic amplitudes reflected by seabed sediments are generated by using Biot model and the performance of proposed feature is evaluated by using Fisher scoring and classification accuracy computed by maximum likelihood decision (MLD). As a result, the proposed feature shows higher discrimination performance and more robustness against measurement errors than that of classical feature.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.2
• /
• pp.91-99
• /
• 2017

The parametric study was performed for performance enhancement of wave energy converter(WEC) using a submerged pendulum plate. The wave exciting moment and hydrodynamic moment were obtained by means of eigenfunction expansion method based on the linear potential theory, and then the roll response of a pendulum plate and time averaged extracted power were investigated. The optimal PTO damping coefficient was suggested to give optimal extracted power. The peak value of optimal extracted power occurs at the resonant frequency. The resonant peak and it's width increase, as the height and thickness of a pendulum plate increase. The mooring line installed at the end of the pendulum plate is effective for extracting wave energy because it can not only induce the resonance with the waves of the installation site but also increase the restoring moment in case of PTO-on. The WEC using a rolling pendulum plate suitable for the shallow water acts as breakwater as well as energy extraction device.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.131-136
• /
• 2004

The transmission coefficients of impermeable submerged breakwater on permeable bottom are computed numerically using a boundary element method. The analysis method is based on the wave pressure function with the continuity in the analytical region including fluid and structures. Wave motion over permeable bottom is simulated by introducing a linear dissipation coefficient and an added mass coefficient. The results indicate that the wave over permeable bottom travels being damped, and that transmission coefficients for permeable bottom are smaller than those for impermeable bottom, and result from the change of width and height of submerged breakwater.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.254-262
• /
• 2015

Parametric study on submerged body shape of an oscillating hemisphere point absorber was conducted to predict the optimal relation between radius and draft of the body. As an additional damping due to power takeoff system, the optimal damping same as wave radiation damping was applied to the PTO system to produce the maximum wave power. Body response spectrum and power spectrum were obtained for various peak frequencies on wave spectra. It was found that the maximum power can be generated when the peak frequency of available wave power was 20% greater than that of wave spectrum.