• Title/Summary/Keyword: 환경유해성평가

검색결과 114건 처리시간 0.03초

A Study on the Hazardousness Evaluation and the Inhalation Toxicity of Methylcyclohexane (메틸사이클로핵산 (methylcyclohexane)의 흡입독성과 유해성 평가)

  • Kim Hyeon-Yeong;Lee Sung-Bae;Kang Min-Gu;Song Si-Hwan
    • Environmental Analysis Health and Toxicology
    • /
    • 제21권2호
    • /
    • pp.173-184
    • /
    • 2006
  • From the harmfulness expectation test conducted through a toxicity anticipation program, methylcyclohexane turned out to be harmful and simulative, but no carcinogenicity was anticipated. In a four-hour acute inhalation toxicity test, the result showed that lethal concentration ($LC_{50}$) was 3,750 ppm (15,054 mg/L), which was identified as a harmful substance on the basis of the harmful substance classification standard $2 of the Industrial safety and health law. methylcyclohexane fell under the category $4(2,500 substance from the GHS standard acute toxicity harmfulness classification. Also, from subchronic inhalation toxicity test that included 6 hours a day, five days a week, and for 13 weeks, we could observe weight, activity, long term weight, blood and blood biochemical influence from the exposure of test substance. No-observed effect level (NOEL) was determined below $100{\sim}400ppm$ inboth male and female. This material falls under the Category 2 ($50{\sim}250ppm/6hours/90days$) in the GHS (Globally Harmonized System) standard trace long-term whole body toxicity repeated exposure, and can be classified as a harmful substance in accordance with the Industrial Safety and Health Law harmful substance standard $NOEL{\leq}0.5mg/L/6hr/90day$ (rat).

Pilot-Scale Biofilter Treatment of Hazardous Air Pollutants (파이로트-규모 바이오필터의 유해성 대기오염물질 처리)

  • Son Hyun-Keun
    • Environmental Analysis Health and Toxicology
    • /
    • 제21권3호
    • /
    • pp.219-228
    • /
    • 2006
  • 폴리우레탄, 폴리에스테르, 바이페놀, PVC 외 각종 농약 등을 생산하는 울산의 모 화학공장에서, 다양한 종류의 휘발성유기화합물질들(VOCs)이 배출되고 있다. 평균적인 휘발성유기화합물질의 배출 농도는 7283 ppm으로, 톨루엔, 페놀을 포함하여 Trimethyl-pentene, trimethyl-hexene, dimethyl-cyclohexane 등이 검출되었다. Trimethyl-pentene, trimethyl-hexene, dimethyl-cyclohexane등은 인화성이 강하며 화재를 일으킬 위험성이 매우 큰 것으로 알려져 있고, 특히 톨루엔과 페놀의 경우는 호흡이나 피부접촉 등을 통한 인체로의 유입이 있을 경우 유독성을 나타내게 된다. 이러한 VOCs제거를 위하여 겨울철 기간에 파이로트-규모의 바이오필터 적용 실험이 진행되어 졌다. 본 연구의 목적은 바이오필터 운영이 진행되는 가운데 온도, 함수비, 하중, 압력손실 등의 제한요소들이 미디어 내부에서 변화하는 상황에 대한 관찰 및 평가에 있다. 이러한 제한요소들은 바이오필터의 디자인과 오염물질 제거에 심대한 영향을 미치게 된다. 바이오필터는 옥외에 설치되어 총 44일간 운영되어 졌는데, 외부 영하온도의 영향을 최소화하기 위하여, 7cm두께의 파이버-글래스 소재 단열설비가 반응기 외부에 설치되었고 또한 $150^{\circ}C$의 스팀이 바이오필터 반응기와 단열설비 사이에 제공되어 졌다. 바이오필터 반응기 내부에는 23개의 온도 측정 센서와 함수비 센서, 공기샘플포트, 습도계 등이 각기 다른 장소에 설치되어 온도, 함수비 등의 제한요소 영향연구가 진행되었다. 미디어 내부 같은 높이의 서로 반대되는 위치에서 온도차가 13.7도에서 -8.3도까지 차이가 나는 것으로 관찰되었으며, 미디어 높이 위치의 변화에 따라서도 21도에서 2도가지 차이를 나타냈다. 바이오필터 함수비는 실험기간 동안 지속적으로 변화가 발생하였는데, 스팀이 제공되는 동안에는 미디어 함수비가 훨씬 빠른 속도로 증가됨이 관찰되어 졌다.

Spatial Analysis of Major Atmospheric Aerosol Species Using Earth Observing Satellite Data (지구관측 위성자료를 이용한 주요 대기 에어러솔 성분의 공간분포 분석)

  • Lee, Kwon-Ho
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • 제14권2호
    • /
    • pp.109-127
    • /
    • 2011
  • Atmospheric aerosols, small particles in the atmosphere, are one of the important parameters in climate change and human health. Additionally, accurate estimates of aerosol species are increasingly important in environmental impact assessment studies. Recent advances in global satellite remote sensing provide powerful tool for air quality monitoring. This study explores the potential usage of satellite derived data such as atmospheric aerosols for air quality monitoring as well as climate change study. The objectives of this study is to understand the general features of the global distribution of type dependent aerosols. A detailed spatio-temporal variability of the each different satellite dataset shows the variation of the global zonal average and specific geographical regions where the strong emission sources are located. Especially, significantly large aerosol amounts are observed in Asia and Africa because of the desert dust storm, anthropogenic and biomass burning emissions.

Current status and issues on prevention from the biological damage of cultural property (국내 문화재 생물피해 방제의 현황과 과제)

  • Choi, Yu Ri;Kang, Dai Ill
    • Korean Journal of Heritage: History & Science
    • /
    • 제48권3호
    • /
    • pp.138-153
    • /
    • 2015
  • For preventing the biological damage domestically, insect damage control method using chemical medicine has been applied. However, it is trend to avoid existing chemical medicine such as Methyl bromide because of the problem of being harmful to human body and environment. Therefore, the research for new medicine to replace this has been done and the interest to the physical treatment such as temperature(high & low) treatment, hypoxic treatment, carbon dioxide treatment, and radiation treatment has increased. However the systematic application standard and way has not been established. Therefore, in this research, we are going to organize present condition of domestic cultural asset preventing biological damage after the 1980's. It will also consider the direction through the characteristic of technology, limit, and replacement medicine by examining the past research.

Comparison of Machine Learning Model Performance based on Observation Methods using Naked-eye and Visibility-meter (머신러닝을 이용한 안개 예측 시 목측과 시정계 계측 방법에 따른 모델 성능 차이 비교)

  • Changhyoun Park;Soon-hwan Lee
    • Journal of the Korean earth science society
    • /
    • 제44권2호
    • /
    • pp.105-118
    • /
    • 2023
  • In this study, we predicted the presence of fog with a one-hour delay using the XGBoost DART machine learning algorithm for Andong, which had the highest occurrence of fog among inland stations from 2016 to 2020. We used six datasets: meteorological data, agricultural observation data, additional derived data, and their expanded data. The weather phenomenon numbers obtained through naked-eye observations and the visibility distances measured by visibility meters were classified as fog [1] or no-fog [0]. We set up twelve machine learning modeling experiments and used data from 2021 for model validation. We mainly evaluated model performance using recall and AUC-ROC, considering the harmful effects of fog on society and local communities. The combination of oversampled meteorological data features and the target induced by weather phenomenon numbers showed the best performance. This result highlights the importance of naked-eye observations in predicting fog using machine learning algorithms.

Properties Evaluation and flowability of Controlled Low Strength Materials Utilizing Industrial By-Products (산업부산물을 활용한 저강도 고유동 채움재의 유동성 및 물성평가)

  • Cho, Yong-Kwang;Kim, Chun-Sik;Nam, Seong-Young;Cho, Sung-Hyun;Lee, Hyoung-Woo;Ahn, Ji-Whan
    • Journal of Energy Engineering
    • /
    • 제27권4호
    • /
    • pp.64-69
    • /
    • 2018
  • The purpose of this study is to expand the use of coal ash and coal slag in thermal power plants. In addition, controlled low strength materials was developed to prevent mine settlement. Bottom ash and KR slag are mixed at ratio of 7:3 to expand the use of industrial by-products through carbonate reaction and inhibit the exudation of heavy metals. In order to efficiently fill the abandon mine, workability and physical properties were evaluated according to flow. As a result of elution of harmful substance experiment, it was confirmed that the carbonation reaction inhibited the elution of heavy metals. It was confirmed that the difference in water ratio was the difference in specific surface area of the controlled low strength materials. It was confirmed that the working efficiency is excellent when the flowability is 300mm compared to 260mm. compressive strength measurement result was relatively high at 260mm compared to 300mm because the number of pores due to decrease of water ratio was small.

Characterization of Flowable Fill with Ferro-Nickel Slag Dust (페로니켈 슬래그 미분말을 이용한 유동성 뒤채움재 특성)

  • Lee, Kwan-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • 제18권5호
    • /
    • pp.16-21
    • /
    • 2017
  • The aim of this study was to utilize ferronickel slag produced in the manufacture of stainless steel as a flowable backfill material for underground use using crushed fine powder. Experimental combinations were made using two components: Case A (sand) and Case B (soil). The optimal mixing ratio of Case A was sand (58.4%), ferronickel slag fine powder (21.6%), cement (1.8%), and water (18.2%). In the case of B, the optimal mixing ratio was determined to be soil (53.0%), ferronickel slag fine powder (20.0%), cement (1.7%), and water (25.3%). The uniaxial compressive strength of case A, which is a mixture of ordinary sand and ferronickel slag powder, was relatively larger than that of case B using soil. In addition, the strength of the specimen increased with increasing curing time. The uniaxial compressive strength tended to increase with increasing curing time. In addition, the unconfined compression strength of the fluid backfill material using common sand as the main material was relatively larger than that of the mixed material using soil as the main material. In case A, the uniaxial compressive strength ranged from 0.17-0.33 MPa, 0.21-0.39 MPa, and 0.19-0.40 MPa, respectively, at curing times of 7, 14, and 28 days. From the experimental results, it was concluded that the ratio of FNS powder and cement mixture was the most appropriate for Case A3. Case B, which used soil as the main material, showed a similar tendency to Case A. As a result of the dissolution test for evaluating the environmental harm of the FNS fine powder, there was no dissolution of substances harmful to the environment.

Behavior Evaluation of Aluminium oxide through Measurement of Mass Concentration under Laboratory Environment (연구실 환경에서의 질량농도 측정을 통한 Aluminium oxide의 거동 평가)

  • Park, Jeong-Hwa;Kim, Dong-Hyun;Kim, Jong-Kyu;Kim, Hyung-Sik;Kim, Jeong-Hun
    • Journal of Digital Convergence
    • /
    • 제14권3호
    • /
    • pp.279-285
    • /
    • 2016
  • With the development of nanotechnology, the amount of nanomaterials increases and the problems of environment and the toxic property associated with it have become a social problem. But regulations and laws of nanomaterials have not yet been established. The purpose of this study is to utilize as the database of safety guidelines for research activities' workers associated with nanomaterials to conduct a behavior evaluation of aluminium oxide, which is most widely used in thirteen kinds of WPMN manufactured nanomaterials in the country. The experiment proceeds in the chamber reduced to 1/6 size of the actual laboratory, the test method was performed in NIOSH 0500. As the results of the study, the mass concentration was in inverse proportion to the particle size of the nanomaterials. And the mass concentration during the operation of ventilation equipment was reduced to about 1/8 times. In the future, it can be utilized as the database of safety guidelines for research activities' workers associated with nanomaterials. However, in order to increase the reliability of the study, the experiment of the mass concentration by particle size and Condensation Particle Counters will be needed additionally.

Reference Values and Water quality Assessment Based on the Regional Environmental Characteristics (해역의 환경특성을 고려한 해양환경 기준설정과 수질등급 평가)

  • Rho, Tae-Keun;Lee, Tong-Sup;Lee, Sang-Ryong;Choi, Man-Sik;Park, Chul;Lee, Jong-Hyun;Lee, Jae-Young;Kim, Seung-Su
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • 제17권2호
    • /
    • pp.45-58
    • /
    • 2012
  • For the development of reference values and evaluation of water quality in various environmental conditions, we divided the coastal region around Korean peninsular into 5 distinctive ecological regions based on the influence of surface current, depth, tidal range, turbidity, and climate condition. We used national marine environment monitoring data collected by National Fisheries Research & Development Institute(NFRDI) from 2000-2009. For the reference values, we used maximum seasonal mean from 2000 to 2007 for DIN, DIP, and chlorophyll-a and minimum seasonal mean for secchi depth measured at stations without the influence of river runoff in each ecological regions. For the reference value of bottom dissolved oxygen saturation, we used minimum mean value of 90% calculated from minimal riverine influence stations of whole regions. We calculated enrichment score for each assessment criteria. The enrichment score of DIN, DIP, and Chlorophyll-a was 1 (=< reference value), 2 (< 110% of reference value), 3 (< 125% of reference value), 4 (< 150% of reference value), and 5 (> 150% of reference value). The enrichment score of DO saturation and Secchi depth was 1 (> reference value), 2 (> 90% of reference value), 3 (>75 % of reference value), 4 (> 50% of reference value), and 5 (< 50% of reference value). We calculated water quality index using weighted linear combination of five enrichment score for the comparison of whole regions. From the water quality index distribution calculated from all stations between 2000 and 2007 period, we classified into 5 grade based on the standard deviation calculated from total water quality index. We assigned grade very good(I), good(II), moderate(III), bad(IV), and very bad(V) when the water quality index was less than 23, minimum + 1 sd, +2 sd, +3 sd, and grater than minium+ 3 sd, respectively.

바실러스에 의한 중금속 제거 및 EPS 추출물질 비교에 관한 연구

  • Son, Han-Hyeong;Kim, Pan-Su;Lee, Sang-Ho
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 한국환경과학회 2006년도 학술발표회 발표논문집
    • /
    • pp.423-427
    • /
    • 2006
  • 1) 바실러스는 불리한 환경조건에서 포자를 형성하며 포자는 균체가 죽어도 살아 남고, 외부 환경이 좋아지면 다시 발아하여 영양형 균체를 형성하게 된다. 본 연구에서 바실러스를 우점화와 포자의 활성화를 위해 열처리(80$^{\circ}C$, 10min)를 한다 울산분뇨처리장 슬러지 Cake를 배양하여 포자화 전 후 상태의 미생물의 EPS 추출결과 RCF법을 적용하였을 때 Carbohydrate물질이 다른 추출법에 비해 가장 많이 추출되었고, Steaming extraction법을 적용하였을 때 Protein이 가장 많이 추출되는 것으로 나타났으며, 포자화 전 보다 포자화 후의 EPS 양이 더 많이 추출될 것이라는 가설을 가지고 실험한 결과 포자화 전보다 포자화 후의 EPS 양이 더 많이 추출되었다. 울산분뇨처리장의 슬러지 Cake를 배양하여 포자화 전 후의 Cu의 제거정도를 비교한 결과 포자화 후의 EPS물질이 포자화 전의 EPS물질보다 Cu를 더 많이 제거하는 것으로 나타났으며 EPS 물질이 중금속 제거능력이 탁월하다고 할 수 있겠다. 2) 용인분뇨처리장과 천안하수처리장의 MLSS의 중금속 제거능력을 알아보기 위해 미생물량을 고려했을 경우와 미생물량을 고려하지 않은 경우로 나누어서 실험을 하였는데 울산분뇨처리장의 슬러지 Cake를 가지고 실험한 결과와 마찬가지로 Bacillus의 EPS물질이 중금속 제거에 탁월하다는 것을 알 수 있다. 3) Baillus를 사용하는 김천 식품폐수 처리장과 활성슬러지를 사용하는 천안하수처리장과의 EPS 함량을 비교한 결과 김천 식품폐수 처리장의 EPS 물질중 Protein과 Carbohydrate가 천안하수처리장의 활성슬러지보다 더 많은 것으로 나타났다.TEX>, DIN/DIP비 표층수 $23.91\pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필

  • PDF