• Journal of the Korean Society for Library and Information Science
• /
• v.51 no.2
• /
• pp.49-71
• /
• 2017

FRBR Library Reference Model is a consolidated model of FR Family Model - FRBR, FRAD, FRSAD developed by IFLA in early 2016. This means the creation of upper model for the consistency of FR individual models. It can be used for the expanding of the discussions on FRBR model in Korea that have been mainly discussed only for the first group of FRBR model. In addition, it can be an opportunity to apply the whole FR Family model to domestic literature in a comprehensive manner. In this study, we analyze the draft of FRBR LRM and apply the model to the Korean classic materials. There are various work, expression, and manifestation related to a work of korean classic material, so it is good to represent the structure of bibliographic information using FR Family model. We built on our experiment using $Prot{\acute{e}}g{\acute{e}}$ to design korean classic materials' ontology modeling, which propose a new orientation of korean classic materials' organizing based on FRBR LRM. As a result, we find out the applicability of the FRBR LRM model on upcoming bibliographical data control environment.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.37-49
• /
• 2021

Micropiles are widely used in construction field to enhance bearing capacity and reduce settlement of existing foundation. It has various benefits such as low construction expense, simple installation process, and small construction equipment. Recently, new microple equipped with the base expansion structure at the end has been developed to improve the foundation bearing capacity. The improvement of load capacity can be conceptually achieved by expanding the base expansion structure when a load is applied to the micropile. However, the expansion mechanism of the base expansion structure and the improvement of load capacity of the micropile were not yet experimentally validated. Therefore, in this study, a series of centrifuge model tests was performed to evaluate the effect of the base expansion structure on the improvement of load capacity. Two types of soil, sand and weathered rock, were prepared and the loading tests were performed using the real micropile with the base expansion structure. During the tests, the earth pressures surrounding the base expansion structure were monitored. As a result, when a load of 30 kN was applied to the micropile, the increase in the ratio of the horizontal to vertical pressure increment (∆σ_h/∆σ_𝜈) ranged from 0.4 to 0.58 in sand and ∆σ_h/∆σ_𝜈 = 0.19 in weathered rock, respectively. Therefore, it can be concluded that the increase in the horizontal earth pressure adjacent to the base expansion structure will improve the bearing capacity of the micropile.

• Korean Journal of Social Welfare
• /
• v.69 no.3
• /
• pp.289-315
• /
• 2017

Debate on basic income expanded worldwide as well as in South Korea. However, the expansion of these discussion has led to vigorous arguments for and against the various claims of basic income. In order to introduce basic income in Korea, discussing on the picture of Korean welfare state which includes basic income is important. In this study, 'Ideal Model of Korean Basic Income (and Welfare State)'is discussed and theoretically constructed using fuzzy-set ideal type approach, and feasible paths in realizing Korean basic income are suggested. This study attempts to contribute to a practical discussion on taking feasible and reasonable path to realize full basic income in Korean welfare state.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.297-310
• /
• 2002

Liang and Zeger proposed generalized estimating equations(GEE) for analyzing repeated data which is discrete or continuous. GEE model can be extended to model for repeated categorical data and its estimator has asymptotic multivariate normal distribution in large sample sizes. But GEE is based on large sample asymptotic theory. In this paper, we study the properties of GEE estimators for repeated ordinal data in small sample sizes. We generate ordinal repeated measurements for two groups using two methods. Through Monte Carlo simulation studies we investigate the empirical type 1 error rates, powers, relative efficiencies of the GEE estimators, the effect of unequal sample size of two groups, and the performance of variance estimators for polytomous ordinal response variables, especially in small sample sizes.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.137-144
• /
• 2004

Algorithms for estimating breeding values on several categorical data by using latent variables with threshold conception were developed and showed. Thresholds on each categorical trait were estimated by Newton’s method via gradients and Hessian matrix. This algorithm was developed by way of expansion of bivariate analysis provided by Quaas(2001). Breeding values on latent variables of categorical traits and observations on linear traits were estimated by preconditioned conjugate gradient(PCG) method, which was known having a property of fast convergence. Example was shown by simulated data with two linear traits and a categorical trait with four categories(CE=calving ease) and a dichotomous trait(SB=Still Birth) in threshold animal mixed model(TAMM). Breeding value estimates in TAMM were compared to those in linear animal mixed model (LAMM). As results, correlation estimates of breeding values to parameters were 0.91${\sim}$0.92 on CE and 0.87${\sim}$0.89 on SB in TAMM and 0.72~0.84 on CE and 0.59~0.70 on SB in LAMM. As conclusion, PCG method for estimating breeding values on several categorical traits with linear traits were feasible in TAMM.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.60-68
• /
• 2015

Recent proliferation of advanced technologies such as wireless communication, mobile, sensor technology and so on has caused significant changes in a traffic environment. Human beings, in particular drivers, as well as roads and vehicles were advanced on information, intelligence and automation thanks to those advanced technologies; Intelligent Transport Systems (ITS) and autonomous vehicles are the results of changes in a traffic environment. This study proposed considerations when designing a simulation model for future transportation environments, which are difficult to predict the change by means of advanced technologies. First of all, approximability, flexibility and scalability were defined as a macroscopic concept for a simulation model design. For actual similarity, calibration is one of the most important steps in simulation, and Physical layer and MAC layer should be considered for the implementation of the communication characteristics. Interface, such as API, for inserting the additional models of future traffic environments should be considered. A flexible design based on compatibility is more important rather than a massive structure with inherent many functions. Distributed computing with optimized H/W and S/W together is required for experimental scale. The results of this study are expected to be used to the design of future traffic simulation.

• Journal of the Korean Society for information Management
• /
• v.34 no.4
• /
• pp.201-225
• /
• 2017

In this study, based on the analysis of FRBRoo, we tried to propose suggestions to expand and improve the FRBR family conceptual model. FRBRoo is a plug-in ontology of CIDOC CRM with cooperation of museum field. As FRBR family models also revised and integrated into IFLA Library Reference Model, the additional analysis on IFLA LRM was performed. If bibliographic information is required to support the technical and user services of the library, the way to analyze the bibliographic information should be improved in order to cope with the new challenges faced by the library. To do this, time-related event concepts should be reflected in the modeling of bibliographic information. It is also necessary to expand the creation and exchange unit of bibliographic information to smaller units or larger units than legacy bibliographic records. Using FRBRoo as a linkage tool for the sharing of bibliographic information is also suggested.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.525-534
• /
• 2007

The peculiarity of end-expanded soil nailing method(EESNM) is in fixing the wedge-type steel body spreaded by collars and grouting its surroundings by cement milk within soils, after extending hole bottom over drilling hole diameter with top drill bit. The present study was done to establish the effect of this method. Laboratory model test were carried out to investigate the behavior characteristics with the performance of the pull-out test and failure experiment, after preparing soil test box having 1,300mm length, width 1,000mm, and height 1,100mm, and the same experimental condition was set up to compare with the general soil nailing method(GSNM). The pull-out force of about 23 percentage was increased, and the horizontal displacements 1.2 from 9.1 percentage in soil-nailed wall decreased in EESNM compare with GSNM. The axial force acting on nail increased considerably at load level over 7 ton in EESNM and 5 ton in GSNM. The predicted failure line from the maxima analyzed by axial tensile strain located at long distance from soil-nailed wall in EESNM. The EESNM demonstrated the superiority of reinforcement effect in comparison with GSNM from the results above mentioned.

• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.707-717
• /
• 2016

Nonparametric procedures in a randomized block design was proposed by Friedman (1937) as a general alternative as well as suggested as a test for ordered alternatives by Page (1963). These methods are used for the rank of treatments in each block. In this paper, we proposed nonparametric procedures using aligned method proposed by Hodges and Lehmann (1962) to reduce among block information and based on placement suggested by Kim (1999) in a randomized block design. We also perform a Monte Carlo study to compare the empirical powers of the proposed procedures and established method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.809-813
• /
• 2004

강우시 유역 내에서 발생하는 수문특성을 구명하고자 하는 연구는 지속적으로 진행되고 있다. 특히 최근 몇년간 집중호우로 인한 홍수피해가 매우 실각한 수준으로 발생하였고, 이에 지방 소하천을 포함한 전국의 하천정비사업이 새로운 설계홍수빈도를 토대로 진행되고 있다. 우리나라의 강우특성은 여름철에 편중되는 특성을 지니고 있어 홍수시의 홍수방어 대책 등 치수에 많은 어려움이 있는 것이 현실이다. 집중호우로 인한 피해는 전 세계적인 문제로 제기되고 있으며, 이에 강우-유출 관계를 규명하고자 하는 노력이 지속적으로 이루어지고 있다. 강우-유출과정은 시간적, 공간적 다변성을 지닌 수문학적 인자에 의해 좌우되기 때문에 이러한 문제를 해결하기 위해 다년간의 강우-유출 자료를 바탕으로 알고리즘을 생성하고, 이를 바탕으로 정확한 모의가 가능한 수문 모형 및 시스템들을 개발하는데 노력을 기울이고 있다(심순보 등, 1998, 신사철 등, 2002). 그러나 이러한 모형들은 많은 매개변수와 다양한 정보들을 필요로 하게 되어 이들을 처리하는데 많은 어려움이 따른다. 따라서 최근에는 GIS(Geographical Information System)를 활용하여 유역과 분수계를 결정하고 하천형태학적인 특성인자를 추출하는 자동화된 유역정보 추출기술 개발에 대한 관심이 집중되고 있다(Bhaskar, 1992, Francisco, 1995, Yeon, 1999). 이에 본 연구에서는 GIS기법을 이용하여 지형자료로부터 하천연장, 배수면적, 지체시간, 도달시간 등 유역내의 분포형 수문매개변수를 추출하였고 추출된 매개변수를 통해 강우-유출식을 적용하여 분포형 유출량을 산정하는데 활용하고자 한다.ansverse Mercatro) 지구좌표계의 DEM 자료로 변환하였다. 또한 유역의 고도차를 이용한 흐름특성 분석을 위해 수치고도자료를 이용하여 유역흐름특성을 분석할 수 있는 TOPAZ(Topographic PArameteri-Zation) 프로그램을 이용하였다. TOPAZ 프로그램을 통해 분석된 각 격자별 분포형 수문 매개변수는 적합한 관계식을 통해 분포형 유출량을 모의하는데 적용된다.다 정확한 유입량 예측이 가능할 것으로 사료된다.이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유