• Journal of the Korean Society of Combustion
• /
• v.8 no.4
• /
• pp.9-14
• /
• 2003

High temperature air combustion technology has been utilized by using preheated air over 1100 K and excessive exhaust gas recirculation. Numerical analysis was performed to investigate the combustion characteristics with high temperature deficient oxygen air combustion by adopting a counterflow as a model problem accounting for detailed chemical kinetics. Methane($CH_4$) was used as a test fuel and calculated oxidizer conditions were low temperature high oxygen (300K, $X_{O2}=0.21$) and high temperature low oxygen (1300K, $X_{O2}=0.04$) conditions. The latter case showed that the flame temperature is lower than the former case and its profile showed monotonic decrease from oxidizer to fuel side, without having local maximum flame temperature at high stretch rate. Also, heat release rate was one order lower and it has one peak profile because of low oxygen concentration and heat release rate integral is almost same for stretch rate. High temperature low oxygen air combustion shows low NO emission characteristics.

• Journal of the Korean Society of Combustion
• /
• v.13 no.1
• /
• pp.31-43
• /
• 2008

Oxy-fuel flame has a significantly different structure from that of air-fuel flame because of its high temperature. This study is aimed to find out the difference of the oxy-fuel flame structure in order to understand reaction mechanism closely, which is crucial to design real-scale oxy-fuel combustion system. By examining pictures of counterflow flame and LIF images, we found that oxy-fuel flame had two-zone structure: fuel decomposition region and distributed CO oxidation region. In the oxy-fuel flame, OH radical was distributed intensely through the whole flame due to its higher flame temperature than crossover temperature. For showing those features of the oxy-fuel flame, 1 MW scale IFRF oxy-natural gas burner was simulated by conditional moment closure(CMC) model. Calculation results were compared with experimental data, and showed agreements in trend. In the simulated distributions of fuel decomposition/CO oxidation rates, CO oxidation region was also separated from fuel decomposition zone considerably, which showed the two-zone structure in the oxy-fuel flame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1323-1326
• /
• 2014

In this letter, we compare the performance of two concatenated coding structures in slow FH/SS systems for multimedia/multicast transmission on shipboard. Two outer code symbols are transmitted during a hop. The first structure consists of one inner codeword per one outer code symbol, while the second structure consists of one inner codeword per two outer code symbols. We analyze the overall block error probability in asymptotic region and show that the performance of the second scheme is superior to the first one.

• Nuclear Engineering and Technology
• /
• v.9 no.3
• /
• pp.117-123
• /
• 1977

The strain ageing behaviour of quenched Zircaloy--4 has been studied as a function of ageing time and temperature in the temperature range 523 to 588 K for a short-ageing time of 1 to 52 seconds. At the test conditions, the strain ageing stress increased with ageing time and temperature at a strain rate of 5.55$\times$10$^{-4}$ sec$^{-1}$ . Applying stress on the Quenched Zircaloy-4, the strain ageing effect indicated following two stages: an initial stage having an activation energy of 0.39 ev considered to be due to Snoek type ordering of intersitial oxygen atoms in the stress field of a dislocation and a second stage having an activation energy of 0.60 ev, due to mainly long-range diffusion of oxygen atoms.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1393-1397
• /
• 2008

본 연구의 목적은 대청호와 하류 하천을 연계하여 연속적으로 부유물질의 이송, 확산, 침강과정을 해석 할 수 있는 통합 탁수 모델을 구축하는데 있다. 저수지와 하천을 연속적으로 모의하기 위해서 횡방향 평균 2차원 수리 수질 모델인 CE-QUAL-W2 (W2)를 사용하였다. 그러나 W2모델은 탁도를 모의 할 수 있는 알고리즘이 없기 때문에 모델 경계지점에서의 탁도-부유사(SS) 농도 상관관계를 조사하여 연속 측정된 탁도를 SS로 변환하였고, SS를 입자크기에 따라 3개의 그룹으로 나누어 각각의 침강속도가 다르게 모의하였다. 모의된 SS는 다시 저수지내 관측지점의 탁도-SS 상관관계를 이용해 탁도로 변환하여 실측값과 비교하였고, 하류 하천에서 취수하는 부여 취수장의 탁도-SS 상관관계를 이용하여 취수 원수의 탁도와 모의값을 비교하였다. 하천의 탁도는 실측값이 없는 관계로 모의된 SS를 그대로 하천의 SS 실측값과 비교하였다. 연구결과 통합모델은 저수지내에서 탁도의 수심별 농도를 잘 예측하였고 입자 크기별 침강속도를 고려한 결과 기존의 단일 SS 침강속도 모델에 비해 탁도 예측 성능이 향상되었다. 모델은 강우시 하천에서 급증하는 SS의 농도 변화를 잘 예측하였고, 금강 하류에 위치한 부여 취수장의 일별 취수 원수의 탁도 시계열 변화와도 비교적 잘 일치하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.5-9
• /
• 2015

Thermal management becomes serious in 3D stacked IC because of higher heat flux, increased power generation, extreme hot spot, etc. In this paper, we reviewed the recent developments of thermal management for 3D stacked IC which is a promising candidate to keep Moore's law continue. According to experimental and numerical simulation results, Cu TSV affected heat dissipation in a thin chip due to its high thermal conductivity and could be used as an efficient heat dissipation path. Other parameters like bumps, gap filling material also had effects on heat transfer between stacked ICs. Thermal aware circuit design was briefly discussed as well.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.472-477
• /
• 2007

사용자 중심의 디자인 패러다임이 도래하면서 점차 사용성 진단이 제품 혹은 서비스의 전체 개발 프로세스 상에서 필수적인 절차이며 이를 통해 사용자의 경험 품질 향상을 모색할 수 있다는 인식이 확산되고 있다. 실제로도 제품 개발 과정의 한 꼭지로서 사용자 리서치를 수행하는 기업이 점차 증가되고 있지만, 리서치를 통해 도출된 결과가 실제 제품 개발에 얼마나 효과적으로 반영되는지에 대해서는 의문을 가지게 된다. 이러한 의문을 품게 된 이유는 사용자 리서치 결과가 실제 제품이나 서비스에 적용된 정도가 크지 않은 경우를 종종 목격하였기 때문이다. 이러한 주요 원인 중 하나로서 리서치 결과가 실무 담당자들에게 전달되는 과정에서 발생될 수 있는 해석 상의 차이 때문일 것이라는 가설을 가지고 사용성 진단 리서치 프로세스의 변화를 시도해 보았다. 다시 말하면, 실제 현장에서 단기간 동안 진행되는 사용자 리서치를 통해 보다 효과적으로 그 결과를 활용할 수 있는 방안으로 리서치 진행자와 실무 담당자간 협업 프로세스 작업 단계인 협업 디자인 워크샵(co-designing workshop)을 제안하였다. 본 연구는 협업 디자인 워크샵 프로세스의 소개를 목적으로 하였으며, 본 연구의 결과가 사용성 진단 리서치 결과의 활용도 및 가치를 향상시키고, 사용자의 입장을 대변하는 리서처의 책임과 역할을 충실히 수행하는데 도움이 될 수 있기를 기대한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.582-590
• /
• 1994

This paper introduce a highly verstile and simple data transmission system designed for commercial power distribution lines. The system operates on the DSSS principle but utilizes two independent carrier frequencies each represents polarity of DS MODEM outiputs. At the receiving terminal, outputs of two envelope detectors are directly applied to separate DS correlators before the two components are compared. The recovered signals which represents data and line noise are then compared at comparator. With the noise power greatly rudused at the correlator, the error rate of the data observed at comparator desplays great improvement comparing to the conventional FSK-DS system in which the detector output are compared before the correlator stage. Despite its simplest structure, the prototype MODEM transmitts 2400 bps with the error rate 10 , about 10dB improved compared to conventional FSK system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.536-543
• /
• 1984

Thermal structure of two-dimensional surface discharge of the heated water into a rectangular resesvoir is investigated by a laboratory simulation with a shallow open channel and a relatively large reservoir. Experimental study is focused on the nature of interfacial mixing between a flowing layer of the hot water and the underlying cold water. For various conditions, mean temperature field, surface velocity distribution and turbulent mixing process have been quantitatively observed. It is found that the Richardson number strongly affects the integral structure of the flow field, and the buoyancy plays a role to control the turbulent diffusion process.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.93-108
• /
• 1997

This paper describes several computational results on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, buoyancy-driven flow in a lake, primary clarifier for water and waste water treatment, hood ventilation in workplace. cyclone combustor and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or RNG κ-ε models. A nonequilibrium turbulent reaction model is developed for the application of the chlorination process in the Dow thermal reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal operating condition of various environmental engineering system of interest.