• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.991-995
• /
• 2005

본 연구에서는 1차원 이송-분산 과정을 연구하고 전단류 흐름 및 분산거동에 있어 Taylor 이론의 핵심이라 할 수 있는 '종방향 이송과 횡방향 확산의 균형'을 기본 개념으로 하여, 이송과 확산을 분리하여 이 두 과정이 순차적으로 발생한다는 가정에 의거한 순차혼합모형을 제시하였다. 본 모형에서는 가상의 하천을 여러 개의 행과 종방향 거리를 길이가 일정한 구획으로 나누어 연속적인 분산과정을 이산적인 형태로 나타낼 수 있게 하고, 횡방향 유속분포에 따라 각 행에 각기 다른 유속을 할당한다. 오염물질은 하폭방향 선오염원으로 원점에 순간주입되며, 주어진 혼합시간 $t_m$ 동안 각 행의 오염물질들이 각자에 할당된 유속을 따라 진행하고 진행이 끝난 후 횡방향 확산이 순간적으로 이루어진다. 횡방향 확산은 횡방향으로 완전하게 일어남을 가정하여, 횡방향 확산이 끝나면 각 열에서의 농도 평균값이 할당된다. 이러한 혼합시간 $t_m$ 동안의 순차적인 이송-확산 과정이 반복되면서 오염물질의 분산이 일어나며, 농도 분포 그래프를 그릴 수 있게 된다. 순차혼합모형을 가상의 직선하천에 적용하여 종분산계수를 유도하였는데, 본 연구에서 유도된 종분산계순식은 Fischer.가 제안한 식과 유사한 형태로 나타남을 알 수 있었다. 본 모형에서 계산된 농도분포 곡선을 해석해와 비교한 결과,두 곡선이 적절히 일치함을 확인할 수 있었으며 해석해와의 비교를 통해 종분산계수 K가 혼합시간 $t_m$과 선형관계임을 확인할 수 있었다. 수심대하폭비에 따라 각기 다른 유속분포에 적용하여 종분산계수 K가 유속편차강도의 제곱에 비례관계에 있음이 밝힐 수 있었다. 수압은 $4.69kg/cm^2$으로 나타났다. 밸브 개폐도가 $100\%$일 때가 밸브를 $60\%$와 $80\%$ 개폐시켰을 때보다 $0.3kg/cm^2,\;0.29kg/cm^2$ 낮게 나타나 밸브를 전체 개방 했을 때 관로내의 수압이 상수설계기준에 적합한 수압을 유지함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.335-336
• /
• 2009

저가격 고효율 실리콘 태양전지를 구현하기 위하여 핵심적으로 적용되는 공정인 SOD(Spin on Doping) 확산공정 최적화에 관하여 연구하였다. n-type 도핑 물질로는 인(P509)을 사용하였으며, Spinning 속도와 Spinning 시간을 각 3000 rpm, 30 초로 고정하고 급속 열처리로에서 확산 온도와 확산 시간을 $800\;^{\circ}C\;{\sim}\;950\;^{\circ}C$, 2 분에서 20 분까지 가변하며 확산공정을 실시하였다. 4-Point Probe 장비로 에미터 표면 저항을 측정한 결과 확산 온도 $850\;^{\circ}C$에서 5분간 열처리 하여 확산 공정을 하였을 때 저가의 고효율 실리콘 태양전지를 구현하는데 적용 하기위한 $30\;{\sim}\;50\;{\Omega}$-sq의 에미터 표면 저항을 만족 시키는 $36\;{\Omega}$-sq의 값을 얻을 수 있었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.203-209
• /
• 2018

To correctly predict the neutron behavior based on diffusion calculations, it is necessary to adopt well-specified boundary conditions using suitable diffusion approximations to transport boundary conditions. Boundary conditions such as the zero net-current, the Marshak, the Mark, the zero scalar flux, and the Albedo condition have been used extensively in diffusion theory to approximate the reflective and vacuum conditions in transport theory. In this paper, we derive and analyze these conditions to prove their mathematical validity and to understand their physical implications, as well as their relationships with one another. To show the validity of these diffusion boundary conditions, we solve a sample problem. The results show that solutions of the diffusion equation with these well-formulated boundary conditions are very close to the solution of the transport equation with transport boundary conditions.

• Korean Journal of Cognitive Science
• /
• v.22 no.3
• /
• pp.235-254
• /
• 2011

Two experiments were conducted to investigate the impact of binocular disparity information on Neon color spreading (NCS). The stimuli was the modification of Ehrenstein figure used by Redies and Spillmann(1981); inner and outer segments were achromatic and middle segments was chromatic. In experiment 1, the effect of binocular disparity was tested in each segment that were divided inner, middle and outer segments. In experiment 2, the impact of added segments that were put in different depth place were tested. The results showed that the segments on same place were, the clearer the NCS was. Consistent with the previous studies, the effect of color segment in front or in behind was not appeared. The case of added segments, regardless of added segments were placed either front or behind, the NCS was reduced. But the effect of added outer segments was more affect then added inner segments. This results were suggested that NCS could be affected by depth information but more affected by stage of before depth processing.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2008

At present, the target amount of demand-side management and investment cost of EE (Energy Efficiency) program, which consists of high-efficiency appliances, has been estimated simply by the diffusion function based on the real historical data in the past or last year. In the internal and external condition, the penetration amount of each appliance has been estimated by Bass diffusion model which is expressed by time and three coefficients. And enough acquisition of real historical data is necessary for reasonable estimation of coefficients. In energy efficiency, to estimate the target amount of demand-side management, the penetration amount of each appliance should be primarily forecasted by Bass diffusion model in Korea. On going programs, however, lightings, inverters, vending machine and motors have a insufficient real historical data which is a essential condition to forecast the penetration amount using a Bass diffusion model due to the short period of program progress. In other words, the forecast of penetration amount may not be exact, so that it is necessary for the method of forecast to apply improvement of method. In this paper, the penetration amount of high-efficiency appliances is forecasted by Bass, virtual Bass, Logistic and Lawrence & Lawton diffusion models to analyze the diffusion progress. And also, by statistic standards, each penetration is compared with historical data for model suitability by characteristic of each appliance. Based on the these result, in the forecast of penetration amount by diffusion model, the reason for error occurrence caused by simple application of diffusion model and preferences of each diffusion model far a characteristic of data are analyzed.

• 베이커리
• /
• no.2 s.319
• /
• pp.81-92
• /
• 1995

성장을 위한 프렌차이즈 업체들의 경쟁이 갈수록 치열해 지고 있다. 이를 위해 각업체는 가맹점 확산과 부실 점포, 폐점 방지를 위해 두마리 토끼를 잡는 힘겨운 노력을 기울이고 있다. 이에 본지는 각 프렌차이즈 업체가 어떻게 가맹점을 모집하고 있으며 성장을 위해 95년 어떤 사업계획을 갖고 있는지 살펴봄과 동시에 향후 전망에 대해 알아본다.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.83-90
• /
• 1996

A diffusion process is often the main mechanism of soil gas/vapor movement in the vadose zone. The diffusion coefficients in the porous soil media are different from those in the free air phase by the reduction of available area for diffusion, tortuous diffusion path and variable cross section area along the diffusion path. To take account those effects of the diffusion process in the porous media, usually the terms of effective diffusion coefficient and tortuosity are have been used. However, as there are many differents definitions for the tortuosity, when the term of tortuosity is used, it is necessary to examine it throughly. Moreover, there are many different equations for the effective diffusion coefficient according to the investigators and the differences in the values of effective diffusion coefficients between the equations are not insignificant, the selection of the equation should be done with caution. In this paper, the different definitions of effective diffusion coefficient are examined and discussed. As well as definitions, the lots of availabe models for the diffusion coefficient in terms of porosities are compared. Also, the constrictiviy which explains the effect of cross sectional area change over the diffusion path was discussed.

• Journal of the Korean Geographical Society
• /
• v.39 no.3
• /
• pp.391-408
• /
• 2004

Modernism is understood as a process of differentiation. Postmodernism or postmodernity, by contrast, involves de-differentiation. There is a breakdown in the distinctiveness of each of spheres of social activities. It is important to explain an examination of the relationships between the de-differentiation and a wide variety of contemporary tourism, expecially postmodern tourism. Also, de-differentiation between the tourism and the social spheres lead to the spatial reflection. Aim of this paper is to examine the processes of de-differentiation between the tourism and the social spheres, which comes out spatially in Jeju island. Especially, location of destinations is concentrated on the coastline in the period of modem tourism. On the contrary, the postmodern tourism shows that the location of destinations are wide spread diffusion its vertically and horizontally. It means that there are to appear a breakdown of distinctiveness between the conventional tourism destinations and the regional person's space.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.263-269
• /
• 2012

Code-Division Multiple-Access(CDMA) allows several users simultaneous access to a common channel by assigning a distinct pseudonoise sequence called spectrum code to each user. Each user in a CDMA system uses a assigned spectrum code to modulate their signal. Choosing the codes used to modulate the signal is very important in the performance of CDMA systems. The best performance will occur when there is good separation between the signal of a desired user and the signals of other users. The receiver synchronizes the code to recover the data. The use of an independent code allows multiple users to access the same frequency band at the same time. In this paper we propose a generalized model of non-linear binary sequence using trace function and analyze cross-correlation of these sequences. These sequences with low correlation, large linear span and large family size, in a direct-sequence spread spectrum communication system, help to minimize multiple access interference, increase security degree of system and enlarge user number.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.141-141
• /
• 2003

전기-광 효과를 이용한 광변조기, 스위치 등의 소자 구현을 위해 고품질의 Ti:LiNbO$_3$ 광도파로 제작은 필수적이다. LiNbO$_3$ 광도파로는 양자교환(APE) 및 Ti 확산 법으로 제조할 수 있으며 전자의 경우 ne 는 증가, no는 감소되는 경향이 있어 편광도 파로의 제작에 용의하며 후자의 경우 ne 와 no 모두 증가하는 도파로 특성을 갖는다. 이러한, 도파로 소자의 특성 향상을 위해서는 Li out-diffusion 이 억제된 손실이 적은 도파로 제작이 필수적이다. 본 연구에서는 Ti 내부 확산법을 이용한 LiNbO$_3$ 광도파로를 확산분위기를 조건으로 하여 제작하였으며, 온도에 따른 각 이온의 반응 메커니즘에 관하여 관찰하였다.