• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.231-233
• /
• 2008

본 논문에서는 IEEE 802.11 WLAN의 MAC인 DCF의 성능을 개선하는 알고리즘을 제안하고 이를 시뮬레이션으로 분석한다. IEEE 802.11 WLAN의 MAC에서는 데이터 전송을 제어하기 위한 방법으로 DCF와 PCF를 사용하며, DCF의 경우 CSMA/CA를 기반으로 한다. CSMA/CA는 스테이션간의 충돌을 줄이기 위해서 임의의 Backoff time을 각 스테이션의 CW(Contention Window) 범위에서 결정한다. 스테이션은 패킷 전송 후 충돌이 발생하면, 윈도우 크기를 두 배로 증가시키며, 패킷을 성공적으로 전송하면 윈도우 크기를 최소 CW로 감소한다. DCF는 경쟁 스테이션이 적은 상황에서는 비교적 우수한 성능을 보이나 경쟁 스테이션의 수가 많은 경우 처리율, 지연 관점에서 성능이 저하되는 문제점이 있다. 본 논문에서는 패킷 전송 후 충돌이 발생하면 윈도우 값을 최대 CW로 증가시키고 패킷의 정상적인 전송 후에는 윈도우 값을 서서히 감소함으로써 현재 WLAN의 망 상태정보를 계속 활용함으로써 패킷 충돌 확률을 낮추는 알고리즘을 제안한다. 제안하는 알고리즘의 효율성을 입증하기 위해 시뮬레이션을 수행하여 그 타당성을 제시하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.145-146
• /
• 2019

SDN(Software Defined Networking) 환경에서는 OpenFlow 프로토콜을 사용함으로써, 컨트롤러는 스위치가 패킷의 도착이나 Table의 상태에 따라 미리 Flow table의 Entry를 추가, 갱신, 삭제하도록 제어한다. 본 논문에서는 Flow entry의 사용량에 대한 확률을 정확하게 측정하기 위하여 Hidden Markov Mode (HMM)을 적용한 새로운 Flow entry 사전 제거 기법을 제안한다. 본 연구를 통해 HMM을 사용하여 기존 기술들보다 효과적이며 Flow table 관리에 있어 향상된 성능을 목표로 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.310-313
• /
• 2011

초해상도 영상복원은 저해상도 영상을 이용하여 하나의 고해상도 영상을 획득하는 기법이다. 초해상도 영상복원은 크게 두 가지 방법으로 구현된다. 단일 영상을 이용한 초해상도 영상복원과, 여러 장의 저해상도 영상을 이용한 초해상도 영상복원 기법이 연구되고 있다. 여러 장의 저해상도 영상을 이용한 공간영역에서의 초해상도 영상복원 알고리즘은 크게 정합, 보간, 후처리 과정을 거치게 된다. 본 논문에서는 정합과정 이전에 입력영상보정을 통한 전처리과정을 수행하여 잡음으로 인한 부정확한 위치정보추정 확률을 감소시키고, 입력영상보정과정인 전처리과정으로 인해 후처리과정을 통한 영상복원 영상보다 향상된 영상을 획득하는 기법을 제안하며, 실험결과에서 기존의 방법보다 좋은 영상을 얻음을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1100-1105
• /
• 2017

In this paper, we propose a power control technique for D2D communication in the heterogenous network consisting of cellular and D2D communication systems. Although the transmit signal of D2D communication degrades the performance of cellular system by interfering the signal reception at CU in the conventional heterogenous networks without eavesdroppers, it can be utilized as jamming signal for preventing other devices from recovering the transmitted information if there are eavesdroppers in the network. The proposed power control technique maximizes the achievable rate of D2D communication while ensuring the target security performance of cellular communication system. Through simulation results, we validate the analysis results and compare the performance with the conventional D2D communication scheme that utilizes its full transmit power for maximizing the achievable rate regardless of the performance of cellular system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.151-164
• /
• 2003

In this paper, induction motor drives with low switching acoustic noise based on the 2 phase modulated RLL(Random Lead-Lag) PWM is proposed and implemented. The proposed switching method is much bettor than 3 phase modulated RLL-PWM from the standpoint of the broadening effect of the acoustic noise spectrum. Along with the randomization of PWM Pulses, SVM(Space Vector Modulation) is executed in the TMS320C31 DSP(Digital Signal Processor). To verify the validity of the proposed RPWM(Random PWM), the experimental study was tried. The experimental results show that the performance of the proposed method and the 3 phase center-aligned SVM / conventional RLL-PWM are nearly the same from the viewpoint of the constant v/f centrel. But, in case of the proposed 2 phase modulated RLL-PWM, the spectrum characteristics of the voltage and the switching acoustic noise are shown to have better broadening effect than 3 phase modulated one.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.63-70
• /
• 2010

In IEEE 802.11e system providing differentiated services, there exist some problems as follows; collision probability increase due to the increase in the number of nodes by employing CSMA/CA transmission mode, transmission speed declining tendency towards the worst of it, which is caused by different transmission mode and decrease of TCP transmission rate as the result of the link occupancy by UDP when TCP shares the link with UDP by the TCP’s flow control characteristic. In this thesis, the initial minimum and maximum CW are set differently according to the number of connected nodes in the network to avoid collisions and TXOP is adjusted according to the channel state, in which ACs with low priority but better channel state will get gradually more chances to transmit leading to optimal channel capacity. Also, by allowing higher priority for ACK frames which control the TCP transmission, the flow control becomes better because that reduces the channel occupancy by UDP flow, and by this, fair transmission is obtained from the result of the more fair transmission and active resource allocation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.21-33
• /
• 1997

This dissertation deals with the design and VLSI implementation of the MTP(Multimedia Transport Protocol) protocol for the high speed networks. High throughput, functional diversity and flexible adaptation are key requirements for the future transport protocol. However it is very difficult to satisfy all these requirements simultaneously. Fortunately, the future networks will be very reliable. It means that the future transport protocol will usually perform some fixed functions without the protocol state information. According to this concept, we proposed and designed the MTP protocol that is consisted of Information Plane and Control Plane. Information Plane performs some fixed functions that are independent of the protocol state information as far as no error. However Control Plane manages the protocol state information and controls the operation of Information Plane. Our MTP protocol was finally implemented as an FPGA chip using the VHDL. We built a testbed for verification of the implemented protocol, and it was shown that the MTP protocol worked correctly and made a throughput of about 800 Mbps. Our future works include the addition of multiplexing and multicasting capabilities to our protocol for multimedia applications.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.159-166
• /
• 2004

The capacity concept presented in the Highway Capacity Manual is for steady-state traffic flow assuming that there is no restriction in downstream flowing, which is traditionally used for planning, design, and operational analyses. In the congested traffic condition, the control objective should be to keep the congested regime from growing and to recover the normal traffic condition as soon as possible. In this control case, it is important to predict the spatial-temporal pattern of congestion evolution or dissipation and to estimate the throughput reduction according to the spatial-temporal pattern. In this context, the new concept of dynamic capacity for managing congested traffic is developed in terms of spatial-temporal evolution of downstream traffic congestion and in view of the 'input' concept assuming that flow is restricted by downstream condition rather than the 'output' concept assuming that there is no restriction in downstream flowing (e.g. the mean queue discharge flow rate). This new capacity is defined as the Maximum Sustainable Throughput that is determined based on the spatial-temporal evolution pattern of downstream congestion. And the spatial-temporal evolution pattern is estimated using the Newell's simplified q-k model.

• Journal of KIISE:Databases
• /
• v.29 no.6
• /
• pp.464-476
• /
• 2002

Main-memory database systems which reside entire databases in main memory are suitable for high-performance real-time transaction processing. If two-phase locking(2PL) as concurrency control protocol is used for the transactions accessing main-memory databases, however, the possibility of lock conflict will be low but lock operations become relatively big overhead in total transaction processing time. In this paper, We designed a real-time static locking(RT-SL) protocol which minimizes lock operation overhead and reflects the priority of transactions and we implemented it on a main-memory real-time database system, Mr.RT. We also evaluate and compare its performance with the existing real-time locking protocols based on 2PL such as 2PL-PI and 2PL-HP. The extensive experiments reveal that our RT-SL outperforms the existing ones in most cases.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.893-898
• /
• 2005

Due to the merits that only a small amount of computation is needed for solutions and stochastic policies can be handled explicitly, the actor-critic algorithm, which is a class of reinforcement learning methods, has recently attracted a lot of interests in the area of artificial intelligence. The actor-critic network composes of tile actor network for selecting control inputs and the critic network for estimating value functions, and in its training stage, the actor and critic networks take the strategy, of changing their parameters adaptively in order to select excellent control inputs and yield accurate approximation for value functions as fast as possible. In this paper, we consider a new actor-critic algorithm employing an RLS(Recursive Least Square) method for critic learning, and policy gradients for actor learning. The applicability of the considered algorithm is illustrated with experiments on the two linked robot arm.