• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2016

This study found a proper parametric life distribution based on maintenance history data of each bridge member under the jurisdiction of the Korea Expressway Corporation for the past 10 years by introducing the concept of reliability and suggested a measure to calculate the mean life and reliability of each bridge member using the parameter obtained with the maximum-likelihood classification. As a result of analyzing the exponential distribution, weibull distribution and log normal distribution being utilized frequently in order to find the parametric life distribution type which well described the life data of each bridge member, it was found that the log normal distribution and weibull distribution described the characteristics of the relevant life data the best. As a result of calculating the mean life of each bridge member based on the estimated parameter, the average life of the steel bridge coating was 18.51 years which was the longest, followed by the bridge deck as 17.56 years. The mean life of the drainage facility and the bridge bearing were 12.27 years and 12.57 years respectively, showing the shortest life.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.317-326
• /
• 2013

Probabilistic design methods can consider uncertainties of design variables and are widely used in the design of vertical breakwaters. The probabilistic design methods include a partial safety factor method, reliabilitybased design method, and performance-based design method. Especially the performance-based design method calculates the accumulated sliding distance during the lifetime of the breakwater or during a design storm. Recently a time-dependent performance-based design method has been developed based on the first-passage probability of individual sliding distance during a design storm. However, because the allowable criteria in the first-passage probability method are not established, the stability of structures cannot be quantitatively evaluated. In this study, the allowable first-passage probabilities for two limit states are proposed by calculating the first-passage probabilities for the cross-sections designed with various water depths and characteristics of extreme wave height distributions. The allowable first-passage probabilities are proposed as 5% and 1%, respectively, for the repairable limit state (allowable individual sliding distance of 0.03 m) and ultimate limit state (allowable individual sliding distance of 0.1 m). The proposed criteria are applied to the evaluation of the effect of wave-height increase due to climate change on the stability of the breakwater.

• KIEAE Journal
• /
• v.10 no.3
• /
• pp.103-110
• /
• 2010

Carbonation is one of the major deterioration factors for concrete. So. lots of researchers have proposed the equations for determining carbonated depth and the initial time of steel corrosion due to carbonation to predict the service life of concrete structures. However, there are large gaps among the equations for predicting carbonation because each researcher has different considering factors to predict carbonation depth. So, in this study, we calculated the deviations of the proposed equations for carbonation, and we calculated each researcher different corrosion initiation time. However, it has a lot of deviation. Therefore, we evaluated the probability of steel corrosion considering each deviation using MCS, an analysis method based on probability theory. In the results, we have proposed much advanced information for determining service life of reinforced concrete structures due to carbonation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.31-40
• /
• 2012

The irregularity of railway track affects not only the comfort of ride such as noise or vibration but also the safety of train operation. For this reason, it is an interesting research area to design a reliable and sustainable railway track system and to analyze the train movement mechanism based on systematic approaches considering reasons of track irregularity possible in a specific local environment. Irregularity data inspected by EM-120, an railway inspection system in Korea includes unavoidable incomplete and erratic information, so it is encountered lots of problem to analyse those data without appropriate pre-data-refining processes. In this research, for the efficient management and maintenance of railway system, progress rate of standard deviation of irregularity is quantified. During the computation, some important components of railways such as rail joint, ballast, roadbed, and fastener have been considered. Probabilistic distributions of irregularity growth with respect to time are computed to predict the remaining service life of railway track and to be adapted for the safety assessment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.345-356
• /
• 2012

Road pavement requires repetitive maintenance works to maintain satisfactory service level to the public. However, the repetitive maintenance works upon deteriorated pavement structure make negative effects to deterioration speed. It often leads to inefficient use of limited budget. For that reason, the pavements require reconstruction work to recover their original performance. Recently, construction demands in the Korean national highway have already been reached to maximum level, and the aged pavements start to demand much more reconstruction works. However, in the real world, road agencies have often been confused when they determine maintenance design for such aged road sections due to budget constraint. It is because there is no reliable long-term maintenance strategy that supports their decision making. To support their decision making, this paper aimed to suggest the best maintenance strategy considering changing process of pavement performance by repetitive maintenance works. As an analysis method, probability distribution and hazard function to estimate the life expectancy were adopted, and then the results were used for long-term life cycle cost analysis with deterministic or Monte-Carlo method under various scenarios. As an empirical study, the Korean national highway data that has long-maintenance history data since 1986 has been applied. Last, this paper considered quality assurance of maintenance work to improve maintenance quality. These could be important information as a part of long-term maintenance strategy of pavement.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.215-225
• /
• 2011

During the past decade, the performance-based design method of caisson breakwaters has been developed, which allows a certain damage while maintaining the function of the structure. However, the existing method does not consider the changing coastal environment due to climate change impacts so that the stability of the structure is not guaranteed over the lifetime of the structure. In this paper, a time-dependent performance-based design method is developed, which is able to estimate the expected sliding distance and the probability of failure of a caisson breakwater considering the influence of sea level rise and wave height increase due to climate change. Especially, time-dependent probability of failure is calculated by considering the sea level rise and wave height increase as a function of time. The developed method was applied to the East Breakwater of the Hitachinaka Port which is located on the east coast of Japan. It was shown that the influence of wave height increase is much greater than that of sea level rise, because the magnitude of sea level rise is negligibly small compared with the water depth at the breakwater site. Moreover, investigation was made for the change of caisson width due to climate change impacts, which is the main concern of harbor engineers. The longer the structure lifetime, the greater was the increase of caisson width. The required increase of caisson width of the Hitachinaka breakwater whose width is 22 m at present was about 0.5 m and 1.5 m respectively for parabolic and linear wave height increase due to climate change.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.5 s.45
• /
• pp.1-10
• /
• 2005

This study proposes a fatigue reliability evaluation procedure for steel-composite high-speed railway bridge based on dynamic analysis and investigates the effectiveness of Tuned Mass Damper(TMD) in terms of the extension of fatigue life of the bridge. For the fatigue reliability evaluation, the limit state is determined using S-N curve and linear fatigue-damage accumulation. Dynamic analyses are peformed repeatedly to consider the uncertainties of train-velocity and damping ratio of the bridge. The distribution of random variables related to fatigue damage for the intended service life is then statistically estimated from analytical results. Finally, the fatigue reliability indices are obtained by means of the Advanced First-Order Second-Moment (AFOSM) method. Through numerical simulation of a steel-composite bridge of 40m span, the effectiveness of TMD on fatigue life of the bridge is examined and the results are presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.215-222
• /
• 1999

Integrating energy storage into electlic power system has long been recognized as a way to maximize a utility's g generation and transmission capacity, Electlic power can be stored during off-peak periods and then recovered during p peak conditions to offset the need for larger generation and transmission capacity, Currently large-scale SMES for the p purpose of energystorage which can be also se$\pi$ed by battery storage or flywheel system has been developed, and near f future it will be integrated into power grids, This paper presents an investment analysis on large-scale SMES which c can determine its optimal size in power systems, In operation model. least generation cost for energy storage in SMES a and its mar밍nal capacity cost can be calculated using the discreteness of probability distribution for power availability I Investment decisions are made by the maximum p디nciple and the case study shows the optimal operation and realistic i information on the proper size of large-scale SMES in power systems.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.343-349
• /
• 2013

Data including 1,372,050 milk records pertaining to 438,019 cows from 1983 to 2011 collected during performance tests conducted by the National Livestock Cooperative Dairy Improvement Center were used to calculate milk income and profit of individuals and investigate the effects of production levels of early lactation (parity 1 and 2, respectively). Individuals with a moderate level of early lactation stayed longer in herds. Among parity 1, the 9,000 kg or higher group had a lower mean number of lactations than the overall mean of 3.13. The 7,000 kg or lower and 10,000 kg or higher groups had lower mean life time milking days than the overall mean of 1,076.8 days. Standard deviations of lifetime traits tended to decrease as production levels increased. For parity 2, the 11,000 kg or higher group had a lower mean number of lactation than the overall mean of 3.43. The lifetime milking days was highest in the 12,000 kg group (1,212.0 days), and generally smaller in the lower groups. Profit increased as the production level of groups increased for both parity 1 and 2. In groups with low production levels, profit of parity 1 was higher than that of parity 2, while the reverse was true in groups with high production levels. These results suggest that individuals in the low production groups had a greater likelihood to be culled due to reproductive or other problems. Furthermore, the accuracy of the prediction of lifetime profit of individuals with a milk yield of 305 days seems to be higher for parity 2 than parity 1; therefore, it is desirable to predict lifetime profit using the 305d milk yield of parity 2. In conclusion, breeding goals are based on many factors in functions for the estimation of profit; however, production levels during early lactation (parity 1 and 2) can be used as indicators of profit to extend profitability.