• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.150-155
• /
• 2002

En case of the fatigue life evaluation of rolling stock structures, mainly deterministic fatigue life evaluation has been carried out. But most of the parameters influencing on the fatigue life have a probabilistic distribution such as normal, log-normal, Weibull, etc. Therefore, to take probabilistic factors into fatigue life evaluation, probabilistic methods are being applied to the fatigue life evaluation of rolling stock. In this paper, probabilistic S-N analysis and methods using limit state functions are introduced. And some results of fatigue life evaluation obtained with these methods for rolling stock structures are shown.

• Composites Research
• /
• 제23권6호
• /
• pp.26-31
• /
• 2010

본 연구에서는 새로운 RTM(Resin Transfer Moulding) 제작 공법으로 기존의 금속 재료를 대체 할 헬리콥터 착륙장치 복합재 토크링크의 피로내구성 평가에 대한 절차와 방법론에 대해 기고하였다. 토크링크의 예상 운용 수명을 적용하기 위하여 진보된 확률적 랜덤 처리 기법을 이용한 모사하중 스펙트럼을 산출하고, 기초 물성 실험값을 기반으로 잔여강도 저하를 분석하여 피로내구성 평가를 하였고 실물 피로시험을 수행하여 결과를 비교 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.400-405
• /
• 2004

In this study, the optimal welding condition of the input power was selected experimentally through the ERW simulator, which is equal to welding status of ERW part in pipe. This condition is the input power 250kW in the heat treatment of the $900^{\circ}C$ normalizing derived from the nondestructive technique and impact energy. In order to evaluate the variation of the fatigue life in the pipe, fatigue surface crack growth test of base and optimal welded metal were performed statistically. As stress intensity factor range (${\Delta}K_s$) increases, the fatigue crack propagation rate (da/aN) of the base metal is faster than that of the welded joint. The variation of the fatigue life in the ERW pipe was estimated statistically using Monte-Carlo simulation with the standard deviation of material constants (C and m) of the paris law in the specimen.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4398-4404
• /
• 2015

스테인리스 강판은 동적기계구조물을 제작하기 위한 구조용 재료로 널리 사용된다. 또한 이들을 일체화 시키는 방법으로 가스용접을 많이 사용하게 되는데 가스용접에는 다양한 종류에 의해 구조물을 일체화 시킨다. 따라서 부재와 부재를 연결하는 용접부에 대한 응력분포 및 피로강도평가는 구조물의 건전성 및 수명을 연구하는데 매우 중요한 요소가 된다. 그래서 본 연구에서는 피로시험에 의해서 얻어지는 ${\Delta}P-N_f$ 관계를 유한요소해석법에 의해서 최대주응력으로 ${\Delta}{\sigma}-N_f$ 관계로 나타내어 피로설계기준을 정하였고, 이 결과를 이용해서 확률론적 통계해석기법을 적용해서 가속식을 추정하여 임의의 목표수명을 예측할 수 있는 신뢰성설계기술기법을 제시하고자 하였다.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.89-94
• /
• 2003

Rolling stock structures such as bogie frame and car body play an important role for the support of vehicle leading. In general, more than 25 years' durability is needed for them. A lot of study has been carried out for the prediction of the fatigue life of the bogie frame and car body in experimental and theoretical domains. One of the new methods is a probabilistic fatigue lift evaluation. The objective of this paper is to estimate the fatigue lift of the bogie frame of an electric car, which was developed by the Korea Railroad Research Institute (KRRI). We used two approaches. In the first approach probabilistic distribution of S-N curve and limit state function of the equivalent stress of the measured stress spectra are used. In the second approach, limit state function is also used. And load spectra measured by strain gauges are approximated by the two-parameter Weibull distribution. Other probabilistic variables are represented by log-normal and normal distributions. Finally, reliability index and structural integrity of the bogie frame are estimated.