• Title/Summary/Keyword: 화학 수축

Search Result 189, Processing Time 0.024 seconds

The Synthesis of $BaTiO_3$ Powder by Sol-Gel Process (졸-겔법에 의한 티탄산 바륨 분말 합성)

  • Doh Kil-myung;Kim IIl-chool;Park Dae-wook
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.1
    • /
    • pp.92-97
    • /
    • 1993
  • Sol-Gel Process is a new method of synthesis of high-quality of glass and glass-ceramics. Ferroeletric material, $BaTiO_3$ powder was made by reacting $Ba(OH)_2$ and $Ti[OCH(CH_3)_2]_4$ in alcohol. There was about 16.5% weight loss in thermogravimetric analysis. It was crystallized to tetragonal structure by heat treatment at $700^{\circ}C$ for 2 hours and had a specific surface area, 16.0 $m^2/g.$ Shrinkage curve by sintering was began around $1100^{\circ}C$ in dilatometer analysis.

  • PDF

Sulfuric Acid Leaching of Manganese from Ferromanganese Dust (황산에 의한 페로망간 집진분 중의 망간 침출)

  • Park, Suji;Sohn, Ho-Sang
    • Resources Recycling
    • /
    • v.24 no.6
    • /
    • pp.24-30
    • /
    • 2015
  • The sulfuric acid leaching of ferromanganese dust was studied. The effect of acid concentration, reaction temperature, stirring rate, particle size and solid to liquid ratio on Mn and Fe extraction in the solution were investigated. It was found that the leaching rate of Mn and Fe increased with increasing reaction temperature and sulfuric acid concentration. Examination of data by shrinking core model suggested that the leaching rate is controlled by chemical reaction at the surface of particle. The activation energy for the leaching reaction of Mn and Fe were calculated to be 79.55 kJ/mol and 77.48 kJ/mol, respectively.

Improving Physical Fouling Tolerance of PES Filtration Membranes by Using Double-layer Casting Methods (PES 여과막의 물리적 막오염 개선을 위한 기공 구조 개선 연구)

  • Chang-Hun Kim;Youngmin Yoo;In-Chul Kim;Seung-Eun Nam;Jung-Hyun Lee;Youngbin Baek;Young Hoon Cho
    • Membrane Journal
    • /
    • v.33 no.4
    • /
    • pp.191-200
    • /
    • 2023
  • Polyethersulfone (PES) is a widely employed membrane material for water and industrial purification applications owing to its hydrophilicity and ease of phase separation. However, PES membranes and filters prepared using the nonsolvent induced phase separation method often encounter significant flux decline due to pore clogging and cake layer formation on the dense membrane surfaces. Our investigation revealed that tight microfiltration or loose ultrafiltration membranes can be subject to physical fouling due to the formation of a dense skin layer on the bottom side caused by water intrusion to the gap between the shrank membrane and the substrate. To investigate the effect of the bottom surface porosity on membrane fouling, two membranes with the same selective layers but different sub-layer structures were prepared using single and double layer casting methods, respectively. The double layered PES membrane with highly porous bottom surface showed high flux and physical fouling tolerance compared to the pristine single layer membrane. This study highlights the importance of physical optimization of the membrane structure to prevent membrane fouling.

A Case Study on the Failure Cause Analysis of Power Cables (전력케이블 고장원인 분석에 관한 사례연구)

  • Hwang, Kwang-Su;Choi, Jong-Soo;Jung, Jong-Wook;Jung, Jin-Soo
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.345-347
    • /
    • 2007
  • This paper describes a case study on the failure cause analysis of power cables and their fittings. For more accurate analysis, electrical and chemical analysis techniques were employed from the macrography stage for the exterior of the cables to the entire disassembly stage. As a result it was confirmed that the power cables failed due to improper fabrication by which electric field was concentrated at the deadend of a shrink tube on the cable.

  • PDF

A Study on the Engineering Characteristics of High Strength Concrete used by high Calcium Sulfate Cement (고황산염 시멘트를 이용한 고강도콘크리트의 공학적 특성에 관한 연구)

  • 박승범;임창덕
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1992.10a
    • /
    • pp.11-18
    • /
    • 1992
  • 프리텐션방식 원심력 고강도콘크리트 말뚝(KS F4306) 콘크리트의 압축강도가 800kg/$\textrm{cm}^2$이상인 고강도콘크리트를 요구하고 있으나 국내에서는 500kg/$\textrm{cm}^2$ 이상의 콘크리트 말뚝제조가 불가한 실정이므로 본 연구에서는 고황산염시멘트를 이용한 고강도콘크리트 말뚝제조에 관한 공학적 특성 연구의 일환으로써 고황산염시멘트의 수화특성 및 고강도 발현기구 구명과 공학적 특성중에서 압축.휨강도의 내동해성, 건조수축 특성 및 화학저항성등을 비교 고찰하여 보통 시멘트보다 품질 특성이 우수함을 확인하였다. 또한 고강도 콘크리트 말뚝의 시제품 제조를 위하여 2개 공장에서 현장 실험한 결과 94.7kg/$\textrm{cm}^2$의 양호한고강도콘크리트를 얻었다. 향후 고강도콘크리트 말뚝 제조의 공업화 및 양산회가 기대된다.

  • PDF

Influence of Heat-Treatment Temperature on the Physical Properties and Microstructure of Phosphoric Acid Coated Oxi-PAN Fiber/Phenolic Composites (인산코팅된 OXI-PAN 섬유/페놀수지 복합재료의 물리적특성과 미세구조에 미치는 열처리온도의 영향)

  • Jo, Dong-Hwan
    • Korean Journal of Materials Research
    • /
    • v.6 no.10
    • /
    • pp.1034-1042
    • /
    • 1996
  • 본 연구에서는 인산코팅된 것과 되지 않은 OXI-PAN섬유를 사용하여 제조된 무질서 배향의 OXI-PAN/페놀수지 복합재료를 불활성분위기의 여러 열처리온도에서 탄화하였을 때, 섬유표면에 인화합물의 존재 유.무가 복합재료의 물리적특성 및 미세구조 변화에 미치는 영향을 조사하였다. 두 종류 복합재료의 물리적특성 변화를 탄화온도 영향에 대한 섬유와 매트릭스 및 그 계면에서의 미세구조 거동변화와 기공형성의 관점에서 해석하였다. 열처리시 온도상승에 따라 섬유와 매트릭스 계면에서의 화학반응에 의해서 그 구분이 점차 사라지면서 국부적으로 치밀하고 균일한 상을 이루고 있는 것으로 조사되었다. 또한, 탄화 조건에서도 인산코팅은 OXI-PAN 섬유의 직경의 감소를 억제하고 열안정성을 향상시키므로 복합재료의 부피수축률을 줄이고 탄화수율을 증가시키는데도 어느정도 기여할 수 있으리라 판단되었다.

  • PDF

Characterization of Undergrounded Distribution Cables - Chemical Structural Defects, Impurities, Degree of Crosslinking and Shrinkage (지중배전 케이블의 특성분석 - 화학구조결함, 불순물, 가교도, 수축율 -)

  • 김종은;고정우;서광석
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.130-134
    • /
    • 1997
  • The structural defects, impurities, degree of crosslinking and shrinkage of 38 field-aged distribution cables have been analyzed. For the comparison of data, 9 new cables were also subjected to an analysis. It is observed that the structural defects and degree of crosslinking show a radial profile. The structural defects are different depending on the manufacturer. A large amount of impurities is present in the insulation shield, which hold true for the new cables manufactured recently. The degree of crosslinking near both shields is lower than that at the central region of the insulation layer. It was also found that, in some cal)toes, the ins난lation was not fully crosslinked. The shrinkage of field-aged cables is higher than that of new cables.

  • PDF

An Experimental Study on the Hydration and Mechanical Properties of High Strength Concrete with High Calcium Sulfate Cement (고황산염시멘트를 이용한 고강도콘크리트의 수화 및 역학적 특성에 관한 실험적 연구)

  • 박승범;임창덕
    • Magazine of the Korea Concrete Institute
    • /
    • v.5 no.1
    • /
    • pp.129-138
    • /
    • 1993
  • 프리텐션 방식 원심력 고강도 콘크리트 말뚝[KS F 4306]제조에 관한 실험적 연구로써 고황산염시멘트를 이용한 800kg/$ extrm{cm}^2$이상의 고강도콘크리트 제조시 수화 특성검토와 콘크르트 조직내의 기공율과 압축강도간의 상관식을 도출하여 고강도 발현기구를 규명하였으며 콘크리트 압축 및 휨강도간의 상관식 유도와 내구성 측면에서의 내동해성, 건조수축, 화학저항성등을 보통 포틀랜드 시멘트와 비교 고찰한 결과, 고황상염시멘트의 내구성이 우수함을 확인하였다.

Effects of Roughness and Blowing on Skin-Friction and Heat-Transfer in the Convergent-Divergent Nozzle (벽면조도와 분출이 수축 확대 노즐의 마찰계수와 열전달에 미치는 영향)

  • 강신형;김성훈
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.6
    • /
    • pp.1282-1291
    • /
    • 1989
  • 본 연구에서는 이러한 연구의 시작단계로 노즐내의 열 경계층 방정식을 정리하고 압축성 와점도모델을 도입하여 유한 차분법을 이용한 전산프로그램을 작성 하였다. 한편 실제로 추진모테에서는 고온 고속의 열기류가 분출되기 때문에 추진 하고 있는 동안 노즐벽을 형성하고 있는 내열재가 심하게 손상되어 표면의 상태가 매우 거칠게 된다. 더구나 경우에 따라서는 내열재가 용발(ablation)하게 된다. 이러한 상태를 감안하여 마찰계수와 열전달 계수를 합리적으로 추정해야만 노즐의 설계와 주변장치를 합리적으로 수행할 수 있다. 따라서 본 연구에는 주로 경계층 내의 압력구배, 압축성의 효과, 물성치의 변화를 고려한 기존 난류모델에 근거하여 프로그램을 작성하고, 이것을 토대로 노즐표면 조도의 영향 및 분출(blowing)의 영 향을 중점적으로 고려하여 그 특성을 연구하였다. 노즐벽에서 분출을 고려한 이유는 표면이 용발할 때 표면의 온도가 거의 일정하게 유지된 상태로 노즐표면이 화학작용을 수반하면서 가스화됨을 초보적으로 고려해보기 위함이다.

Studies on the Physio-chemical Effects of Xanthoxyli Fructus (Xanthoxyli Fructus의 생리화학적(生理化學的) 작용(作用)에 관(關)한 연구(硏究))

  • Lee, Sung-Woo;Cho, Soo-Yeul;Park, Jyung-Rewng
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.5 no.1
    • /
    • pp.65-68
    • /
    • 1976
  • Water extract of Xanthoxyli fructus(XW) caused contraction of the rabbit intestinal strip which was not affected by hexamethonium, promethazine and methysergide but was blocked by atropine-pretreatment. The above results suggest that cholinergic mechanism plays an important role in contractile response of XW on the rabbit intestine.

  • PDF