• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1993.12a
• /
• pp.10-11
• /
• 1993

기저상태의 산소분자는 비교적 안정하지만 생체ㅇ내외에서 물리적, 화학적으로 활성화 되어 $O_{2}$, $^{1}O_{2}$, OH, $H_{2}O_{2}$ 등의 활성산소종을 생성하며, 생체의 지질, 단백질, 핵산 당등의 분자에 산화적 상해를 초래하여 노화, 암, 순환기, 호흡기 게통의 질환과 식품의 품질열화에 관여하는 것으로 알려져 있다. 따라서 본인은 식품의 맛, 향기, 색 등을 부여하는 고유의 기능 외에도 방부제, 한방약으로 널리 이용되고 오고 있는 51종의 향신료를 대상으로 활성산소포촉활성을 조사하고 나아가 활성물질을 분리, 정제 및 동정함으로 향신료의 새로운 기능을 밝히고 신약 개발의 기초적 자료를 제시하고저 한다. Fenton 반응을 이용하여 2-deozyribose 산화법과 sodium benzoic acid 수산화법으로 51종의 향신료의 OH 포촉활성을 검색한 결과, Cruciferae과의 nustard 류, Labiatae과의 thyme, saga, savory, oregano, Myrtaceae과의 clove, allspice 가 1ug/ml 농도에서 50%이상의 포촉활성을 나타내었으며 그중 mustard 류는 같은 농도에서 거의 90%이상의 활성을 나타내었다. 활성물질의 분리 및 정제는 Amberlite XAD-2 갈럼과 preparative-HPLC를 이용 하였으며, EI, FAB-MS, IR, $^{1}H$, $^{13}C-NMR$, Cosy-NMR로 그 화학적 구조를 동정하였다. Brown mustard에서 동정된 4-hydroxy-3,5-dimethoxy cinnamic acid Methyl ester는 0.42$\mu$ mol 농도에서 90% 이상의 OH 포촉활성을 나타내어 이를 diazomethane 반응으로 조제하였으며 white mistard에서는 4-hydroxy-3,5-dimethoxy cinnamoyl choline을 동정하였다.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.20-28
• /
• 2008

Leather waste discharged from Shinpyung Changrim Industrial Complex contained 46.3 percent of carbon, and weight loss of leather waste about 50 percent was observed at $500^{\circ}C$ by thermogravimetric analysis. Chemically activated carbon [LW4AC] was made at activation temperature of $800^{\circ}C$ during 30 minutes in electric furnace. Iodine value and decoloration of methylene blue was 968 mg/g and 158 mL/g, respectively. We found that pore volume was more developed according to the increase in the ratio of $K_2CO_3/LW$.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.307-312
• /
• 2017

In this study, the electrochemical performance of surface modified carbon using the PFO (pyrolyzed fuel oil) was investigated by chemical activation with KOH and $K_2CO_3$. PFO was heat treated at $390{\sim}400^{\circ}C$ for 1~3h to prepared the pitch. Three carbon precursors (pitch) prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3h), 4001(at $400^{\circ}C$ for 1h) and 4002 (at $400^{\circ}C$ for 2h). Also, the effect of chemical activation catalysts and mixing time on the development of porosity during carbonization was investigated. The prepared carbon was analyzed by BET and FE-SEM. It was shown that chemical activation with KOH could be successfully used to develop carbon with specific surface area ($3.12m^2/g$) and mean pore size (22 nm). The electrochemical characteristics of modified carbon as the anode were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4002) modified by KOH has better initial capacity (318 mAh/g) than that of other pitch coin cells. Also, this prepared carbon anode appeared a high initial efficiency of 80% and the retention rate capability of 2C/0.1 C was 92%. It is found that modified carbon anode showed improved cycling and rate capacity performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1037-1044
• /
• 2000

The objective of this study is the preparation of activated carbon for BAC(biological activated carbon). Prepared activated carbon was measured iodine adsorption(mg/g). methylene blue adsorption(mg/g), B.E.T($m^2/g$), PSD(Pore Size Distribution) and 'Picabiol' which in commercial activated carbon for BAC. Activation method for this study was a chemical activation used the phosphoric acid. In the method, two important factors affected activation characterized in preparation were temperature and impregnated phosphoric acid concentration. Activation temperature and impregnated phosphoric acid concentration were changed the $600{\sim}800^{\circ}C$ and 35~50wt% respectively. Activation time was fixed for 3 hour. Optimal activation temperature was $800^{\circ}C$ and impregnated phosphoric acid concentrations was about 50wt%. By the above condition specific surface area, iodine adsorption number and methylene blue adsorption number resulted $1643.3m^2/g$, 1093 mg/g, 445.6 mg/g, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.47-52
• /
• 2012

Porous carbon nanofibers were prepared as a gas sensor electrode to study the $CO_2$ sensing property based on effects of porosity and introduced amine functional groups. Electrospun fibers were obtained by using electrospinning method with polyacrylonitrile precursor and they were treated by the thermal treatment and chemical activation. Amine functional groups were introduced by the liquid state treatment using diethylenetriamine. The specific surface area increased up to $2000m^2/g$ by the chemical activation. The Introduced amine functional group was identified using FT-IR spectroscopy. $CO_2$ gas sensing property was improved as four folds via introduced amine functional groups on the activated carbon nanofiber. In conclusion, the gas sensing property was improved based on the developed porosity by the chemical activation and the chemical attraction of $CO_2$ gas by introduced functional groups.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.480-487
• /
• 2015

In this study, several kinds of active carbons with high specific surface area and micro pore structure were prepared from the coconut shell charcoal using chemical activation method. The physical property of prepared active carbon was investigated by experimental variables such as activating chemical agents to char coal ratio, flow rate of inert gas and temperature. It was shown that chemical activation with KOH and NaOH was successfully able to make active carbons with high surface area of $1900{\sim}2500m^2/g$ and mean pore size of 1.85~2.32 nm. The coin cell using water-based binder in the electrolyte of LiPF6 dissolved in mixed organic solvents (EC:DMC:EMC=1:1:1 vol%) showed better capacity than that of oil-based binder. Also, it was found that the coin cell of water-based binder shows an improved cycling performance and coulombic efficiency.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.308-312
• /
• 2013

Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481 $m^2/g$) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using $LiMn_2O_4$, $LiCoO_2$ as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes ($LiPF_6$, $TEABF_4$) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using $LiMn_2O_4$/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.445-449
• /
• 2012

The activation process of the membrane-electrode assembly (MEA) is important for the mass production of the polymer electrolyte membrane fuel cell. The conventional activation process for the MEA requires excessive time and hydrogen gas and it might become the barrier for the commercialization of the fuel cell. The conventional activation process is based on hydrolysis of ion conducting membrane. In the study, we suggest the cyclic voltammetry (CV) technique as an on-line activation process and the CV activation process consists of two steps : 1) the humidification of the polymer electrolyte membrane and the electrode with 100% RH humidified nitrogen ($N_{2}$) gas, and 2) the removal step of the oxide layer on the surface of the Pt catalyst with CV cycling. The cycling reduces the activation time of the MEA by 2.5 h and use of hydrogen gas by 1/4.

• Journal of Life Science
• /
• v.2 no.2
• /
• pp.120-131
• /
• 1992

효소에 의한 펩티드합성법은 합성반응의 개발초기에는 용매로서 침전계를 이용하여 아미노산 혹은 펩티드기질에서 펩티드생성의 방향으로 평형화하는 방법을 많이 이용하였지만 최근에는 물에 섞이는 유기용매들을 수용액과 함께 사용하여도 합성반응이 이루어진다는 사실이 밝혀졌다. 하지만, 효소를 공업적으로 이용할 때 값이 너무 비싸고 합성물과의 분리, 정제에 어려움이 있다. 이러한 문제를 해결하기 위하여 효소의 고정화법이 널리 이용되고 있다. 한편 protease에 의한 펩티드의 역합성은 단백질공학의 한 수법인 반합성으로서 주목을 끌고 있다. DNA의 조작기술이 오늘날과 같이 발전하기 이전에는 단백질합성의 공학적기법은 이 반합성과 화학적수식으로 한정되었다. 본고에서는 protease를 이용한 생리활성펩티드의 합성에 필요한 protease의 종류, 이들의 펩티드합성작용기구, 합성설계조건 및 유용 생리활성펩티드의 합성 예를 소개하였다.