• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.249-258
• /
• 2007

In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.431-446
• /
• 2018

In this study, chemical characteristics of $PM_{2.5}$ samples collected in an agricultural area in Nonsan of Korea were investigated focusing on of black carbon, 3 inorganic ions and 22 trace elements. It was found that the relative error and relative standard deviation of many trace elements fell below 10%, which indicates good analytical accuracy and precision. The mean values of $PM_{2.5}$ in an agricultural area were exceeded by new Korean air quality standard of March 2018. The concentration of $PM_{2.5}$ was well correlated with those of black carbon and ions. The concentrations of trace elements were in a wide range of seven orders of a magnitude. Based on these $PM_{2.5}$ data sets, a total of 6 sources were identified using PMF (Positive Matrix Factorization; secondary aerosol (34.4%), soil/road dust (20.1%), biomass burning (16.9%), incineration/fuel combustion (13.2%), vehicle exhaust(12.2%), sea-salt (3.17%). Results of our study indicate that it is very important to control illegal burning activities in agricultural area.

• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.87-98
• /
• 2015

Geochemical characteristics, water quality, $NO_3{^-}$ contamination and the origin of $NO_3{^-}$ were analyzed for the groundwater located at Ogcheon, Korea. The water qualities were weakly acidic to weakly alkalic and redox potentials indicated reduction condition. Compared to granitic rocks, metamorphic sedimentary rocks with intercalations of limestones and dolomites tended to be more effectively dissolved, resulting in higher pH and higher concentrations of dissolved ingredients. Contamination of heavy metals was not revealed. Geochemical reactions of carbonate rocks and influxes of artificial contamination ingredients seemed to simultaneously determine the geochemical characteristics and water qualities in the study area. From the results of ${\delta}^{15}N$ isotope analysis, the origin of $NO_3{^-}$ was estimated to be influenced dominantly by agricultural activities and human feces and urine.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.3
• /
• pp.274-282
• /
• 2000

Physico-chemical characteristics and chemical composition of seed oil of Sapium japonicum were determined by various analysis methods. Physio-chemical characteristics of the extracted oil from fresh seed were specific gravity (0.928), refraction index (1.477), acid value (2.30), saponification number (190.0), and iodine value (126.0). Neutral lipid (93%) in seed oil was identified as major components, followed by glycolipid (4.9%) and phospholipid (1.3%). In GC analysis, nine fatty acids were presented in the seed oil. Among fatty acids, predominant fatty acids were oleic acid (45.8%) and linoleic acid (35.6%). The contents of fatty acids of seed oil somewhat varied with their storage period. Composition of fatty acids from lipid fractions which were isolated on silica open column was investigated. Major fatty acids in three lipid fractions were linoleic acid and linolenic acid. The fatty acid contents of fresh seed oil derived from each lipid fraction were generally high comapred to storage seed oil. From the above results, seed oil of Sapium Japonicum could be useful in cosmetics, detergents and a few pharmaceuticals.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.4
• /
• pp.321-328
• /
• 2006

A basic research was conducted on the mineral weathering and geochemical characteristics in the KURT (KAERI Underground Research Tunnel), which was recently constructed at a site in KAERI. Some rock samples exposed during the KURT construction were examined using a microscope and chemical analysis for some micro-changes of the rocks caused by the chemical weathering. The weathered granite has some small and fine cracks around the rock-forming minerals. In particular, there are a characteristic weathering of feldspar mineral and a preferential leaching of Ca component from the mineral dissolution. In addition, by the dissolution of biotite containing $Fe^{2+}$ component there were iron-oxides precipitates as secondary products into the microcracks of around minerals. The results also show that the micro-cracks initiated from the mineral interior are extended and connected into the larger cracks along the grain boundary with the progress of the weathering. Thus, it is considered that some chemicals dissolved from the fresh rock would be involved in the formation of secondary minerals and migrate interacting with them.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.227-232
• /
• 2009

Fe compounds of scoria samples distributed in the western seaside area of Jeju island were investigated by means of X-ray fluorescence spectroscopy (XRD), X-ray diffractometry (XRF) and $^{57}Fe$ Mossbauer spectroscopy. The samples were prepared from five parasite volcanos. We found that the samples were a typical basalt from the contents ratio of $SiO_2,\;Al_2O_3$ and Fe, and that they were silicate minerals. Underwater volcanoes scoria samples are shown only doublets in Mossbauer spectra and others scoria samples are shown sextets due to hematite and magnetite. And the balence state of Fe in the underwater volcanoes scoria samples are chiefly 2+ charge state with a little of the 2+ charge state. But the balence state of Fe in the others scoria samples are chiefly 3+ charge state.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.135-140
• /
• 1998

The constituents of deposits on paper machine and holes/spots in paper have been analyzed by a combination of analytical techniques, such as FTIR, Py-GC-MS, and EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as a preliminary analysis. The analysis of organic components was carried out with a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analyzed by SEM equipped with an EDS analyzer after pyrolysis at $590^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic components of fatty acid ester and starch, and the inorganic components of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable alkyl keten dimer(AKD) and $CaCO_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that was used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streaks on coating.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.675-680
• /
• 1990

A near-infrared reflectance spectroscopic(NIRS) method which has been recently developed for a non-destructive method for measuring ingredients in foods and agricultural products especially was evaluated for the determination of capsanthin, total sugar, capsaicin and moisture contents in Korean domestic red peppers. A multiple linear regression analysis with the data obtained by standard-laboratory methods(capsaicin by GC, capsanthin by Colorimetry, total sugar by HPLC and moisture by Vacuum drying method) and NIRS method was carried out to make a calibration. The accuracy of the NIRS method was found to be adequate when the standard-laboratory values for a set of sample that were not included in the calibration, were compared. It is concluded that the NIRS method is suitable for the determination of total sugar and capsanthin.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.345-350
• /
• 1983

Collected 38 varieties of colored-soybean seed cultivated under a given cultural conditions were tested in the various chemical compositions and rheological properties in seeds. As it were, protein, fat, carbohydrate, ash and water contents as a chemical contents were studied not only on their statistical variations, but also on interrelationships with their collaborated rheological characteristics; hardness, cohesiveness, elasticity, gumminess and chewiness. For the rheological analysis of the materials, the General Foods Texturometer and typical texturometer curve were used.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.03a
• /
• pp.78-91
• /
• 2004

염(Salts)은 일반적으로 가장 강력한 풍화요인 물질 중 하나이다. 염의 결정화(crystallization) 및 수화(hydration)작용은 석재의 화학적 풍화 뿐만이 아니라 물리적 풍화를 가속화 시킨다. 감은사지 석탑은 오랜 세월 대기 중에 노출되어 대기환경오염으로 인한 화학적 풍화 뿐만이 아니라 지리적으로 바다에 인접해 있어 바다에서 기원한 염화나트륨(NaCl)의 영향으로 다른 석조물에 비해 심한 물리적 풍화현상을 보이고 있다. 편광 현미경 및 SEM, XRD, XRF를 이용하여 석탑의 구성석재 및 염(salts)에 대한분석을 실시하였으며, 용출실험을 통해 얻은 용액에 대해서는 IC와 ICP-AES를 이용하여 분석하였고, 염류와 석재의 반응산물로 만들어진 염에 대해서는 정방위시료와 부정방위시료를 제작하여 분석하였다. 감은사지 석탑을 이루는 암석은 결정응회암으로 주 구성 광물은 사장석 및 정장석이며 소량의 석영 및 흑운모 등이 함유되어 있고 소량의 유리질 석기로 구성되어 있다. 석재의 표면에는 주 구성 광물들의 화학적 풍화로 인해서 생성된 2차 광물로 팽창성 점토광물인 스멕타이트가 존재하며, 대기오염물질과의 결합에 의해 생성된 대표적인 황산염인 석고$(gypsum,\;CaSO_4{\cdot}2H_2O)$, 소금(halite, NaCl), 해양기원 염류인 소금성분과 대기오염물질이 만들어낸 테나다이트$(thenardite,\;Na_2SO_4)$가 존재한다. 이들 염류는 일차적으로 암석의 표면에 백화현상을 초래하기도 하고, 대기 중의 오염물질과 결합하여 일부는 흑화현상을 보이기도 한다. 또한 암석 내 수분이 증가할 경우 이들 염들이 암석의 공극이나 열극을 따라 내부로 이동하여 subflorescence를 발생시켜 박락 및 박탈의 원인이 되었으며, 온도와 수분의 변화에 따른 이들 염(salts)의 수화 및 결정 작용 그리고 새로운 염(salts)의 침전작용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.