• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.514-521
• /
• 2010

A new one-shot process was employed to fabricate proton exchange membranes (PEMs) over conventional solvent-casting process. Here, PEMs containing nano-dispersed silica nanoparticles were fabricated using one-shot process similar to the bulk-molding compounds (BMC). Different components such as reactive dispersant, urethane acrylate nonionmer (UAN), styrene, styrene sulfuric acid and silica nano particles were dissolved in a single solvent dimethyl sulfoxide (DMSO) followed by copolymerization within a mold in the presence of radical initiator. We have successfully studied the water-swelling and proton conductivity of obtained nanocomposite membranes which are strongly depended on the surface property of dispersed silica nano particles. In case of dispersion of hydrophilic silica nanoparticles, the nanocomposite membranes exhibited an increase in water-swelling and a decrease in methanol permeability with almost unchanged proton conductivity compared to neat polymeric membrane. The reverse observations were achieved for hydrophobic silica nanoparticles. Hence, hydrophilic and hydrophobic silica nanoparticles were effectively dispersed in hydrophilic and hydrophobic medium respectively. Hydrophobic silica nanoparticles dispersed in hydrophobic domains of PEMs largely suppressed swelling of hydrophilic domains by absorbing water without interrupting proton conduction occurred in hydrophilic membrane. Consequently, proton conductivity and water-swelling could be freely controlled by simply dispersing silica nanopartilces within the membrane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.108-108
• /
• 2000

급증하는 무선통신 정보수요는 특히, 고주파대역 (300NHz-300GHz)에서 사용되는 공진기, 필터, 발진기 등과 같은 소자의 품질향상을 요구하고 있다. 고주파용 유전체 중 ZrTiO4 는 $\alpha$-PbO2 계열의 사방정구조를 갖고 있는 유전체로서 높은 유전율 ($\varepsilon$=40)과 높은 품질계수 (Q=1/tan$\delta$=4700 at 7GHz)를 갖고 있고, Sn 첨가시 0ppm/$^{\circ}C$의 공진주파수 온도계수를 얻을 수 있다고 보고되어 있다. 본 연구에서는 약 110$0^{\circ}C$ 이상에서 안정한 상으로 존재하는 ZrTiO4를 저온에서 증착하여 준안정한 상태로 결정화되게 한후, 유전손실 (tan$\delta$)과 유전율($\varepsilon$)을 측정하였다. 또한 증착온도와 열처리과정에 따른 박막의 us형 (Strain) 정도의 변화를 X-선 회절결과로부터 분석하였으며 이를 측정된 유전특성 값과 비교하였다. ZrTiO4 박막은 DC magnetron reactive sputter로 Zr과 Ti 타겟으로부터 high phosphorous doped Si (100) 기판위에 증착하였다. 압력은 4mTorr로 유지하고 박막의 화학양론적 조성비를 맞추기 위해 각 타겟에 가해지는 power는 Zr/Ti=500W/650W로 고정하고, 반응가스의 비율을 Ar/O2=17sccm/3.5sccm으로 유지하여 박막내에 인입되는 산소량을 제어하였다. 증착 직후와 열처리 후의 박막특성을 비교하기 위해 증착온도를 상온에서부터 $600^{\circ}C$까지 변호시키고 증착후 각각의 시편을 80$0^{\circ}C$ 산소분위기에서 2시간동안 열처리하여 시편을 준비하였다. 박막의 상형성 여부와 결정성변화는 $ heta$-2$\theta$X-선 회절법을 사용하여 조사하였고, EPMA를 이용하여 박막의 조성을 확인하였다. 유전특성의 측정을 위해 백금 상부전극을 증착한 후, impedance analyzer를 이용하여 100kHz 영역에서의 유전손실을 측정하고, 측정된 정전용량과 박막의 두께로부터 유전율을 계산하였다. ZrTiO4 박막은 증착온도 20$0^{\circ}C$ 이상에서 결정성을 보이기 시작했으며, 열처리 이후에는 상온에서 비정질이었던 시편이 $650^{\circ}C$ 이상의 온도에서 결정화되기 시작하였다. 증착온도에 따라 유전손실은 0.038에서 0.017 정도로 감소하는 경향을 나타냈으며, 각각 열처리에 의해서 0.034, 0.005 정도로 다시 감소하였다. 박막의 유전율은 약 35 정도의 값을 나타내었으며 X-선 회절 data로부터 분석한 박막의 변형은 증온도에 따라 7.2%에서 0.04%로 감소하였고 이 이경향은 유전손실은 감소경향과 일치하였다.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.433-439
• /
• 2012

In this study, a cationic surfactant BHMAS (N,N-bis-(3'-n-dodecyloxy-2'-hydroxypropyl)-N-methyl-2-hydroxyethylammonium methyl sulfate) having two lauryl and three hydroxyl groups was synthesized by the reaction of n-dodecyl glycidyl ether and 2-aminoethanol followed by the quarternization with dimethyl sulfate. The structure of the product was elucidated by $^{1}H-NMR$ and FT-IR. The CMC (critical micelle concentration) and surface tension of BHMAS at CMC condition were found to be $9.12\;{\times}\;10^{-4}$ mol/L and 28.71 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer indicated that a relatively long time was required to saturate the interface between air and aqueous surfactant solution. The interfacial tension measured between 1 wt% surfactant solution and n-decane reached an equilibrium value of 0.045 mN/m in 5 min. The adsorption capacity of the synthesized surfactant was observed to be excellent, which suggests that the surfactant can be used as a softening agent during a laundry process.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.440-444
• /
• 2012

In this work, a semi-carbonized wood chip (SC-WC) was prepared by heat-treatment at low carbonization temperature. The pyrolysis characterization and heating value of the SC-WC at different heat-treatment temperature were evaluated. The pyrolysis characterization and heating value of the SC-WC were determined using thermal gravimetric analyzer (TGA) in $N_{2}$ atmosphere and calorimeter, respectively. From the TGA results, the thermal decomposition reaction of the SC-WC treated at by low temperature was similar to pure wood chip and the reaction was most actively occurred in the range of $200^{\circ}C$ to $400^{\circ}C$, whereas the initial thermal decomposition temperature of the SC-WC increased with the increasing heat-treatment temperature. In addition, the heating value of the SC-WC showed a similar trend as to the decamposition temperature behavior. This is probably attributed to increased carbon content of SC-WC by the localized carbonization of the wood chip which consisted of cellulose, hemi-cellulose, and lignin.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.164-169
• /
• 1998

In order to evaluate the utility of the bituminous coal fly ash, gypsum, oyster shell as soil amendments, acid sandy loam soil with low boron content were amended in the upper 15cm with amendments, and then chinese cabbage was cultivated in fall. Amendments treated were, in metric tons per hectare, i ) none(Check) ; ii) 80 fly ash(FA) ; iii) 4shell(SH) ; iv) 56 fly ash+24gypsum (FG) ; v) 40 fiy ash + 24 gypsum +0.8 shell(FGS). On the whole, amendments imoroved soil chemical properties and contents of N, P, K, Ca, and B in leaves. Among treatmens, FA prominently neutralized soil pH and increased available $P_2O_5$ ,B but decreased Fe contents in soils. FGS also affected the increment of exchangeable Ca, Mg, and available B. Yield response in fresh weight of chinese cabbage was in order of 85% for FGS>77% for FG>66% FA>5% for SH plants. Reducing sugar and vitamin-C contents of leaves depending on treatments showed the same tendencies as that in yields, whereas crude fiber opposite to theme. In particular, FA, FG, and FGS plants showed normal growth without boron deficiency symotoms which appeared in Check and SH plants.Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, and shell as soil amemdments, especially in cabbage yield and quality.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.65-69
• /
• 1998

In order to evaluate the utility of bituminous coal fly ash, gypsum, oyster shell as soil amendments, aadic clayloam paddy soils with low calaum content were amended in the upper 15㎝ with amendments, and then Chinese cabbage was cultivated under plastic film house. Amendments treated were, in metric tons per hectare, i) none(Check) ; ii) 80 fly ash(FA) ; iii) 4 shell(SH) ; iv) 56 fly ash+24 gypsum (FG) ; v) 40 fly ash+24 gypsum+0.8 shell(FGS). On the whole, soil chemical properties were improved by amendments treatments. Amongst treatments, FA prominently neutralized soil pH and increased contents of Av. $P_2O_5$, Ex. K, and Av. B in soils. Besides, it showed the highest ratio in bacteria/fungi and (bacteria+actinomycetes)/fungi. FGS also affected the neutralization of soil pH and the increment of Ex. Mg. Amendments plants appeared alkaline damages only at early growing stage, but showed positive responses in fresh weight yields : 23% for FGS : 21% for FG : 19 18% for SH. At harvesting, leaves both of FA and FGS plants had higher values in contents of N, P, K, Ca, Mg, Fe, Mn, Zn, B, reduang-sugar, and vitamin-C than of others. In especial, Check plants appeared the heart rot symptoms owing to calaum defiaency differently from amendments plants. Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, shell as soil amendments, espeaally in cabbage yield and quality.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1180-1185
• /
• 1999

Modispersed silica fine particles were produced from the hydrolysis of $Si(OC_2H_5)_4$ by using batch-semibatch mixed systems. Four types of mixed process, i.e., batch-batch, batch-semibatch, semibatch-batch, semibatch-semibatch, were used in order to measure mean particle size, particle size distribution, yield, and packing density. As a result of the test, silica particles prepared by semibatch-semibatch process were larger than those prodeced from any other systems in particle size and yield. On the other hand, silica particles prepared by batch-semibatch process were better than those produced from any other systems in particle size distribution and packing density. Especially, it was found that particle size of $SiO_2$ prepared by semibatch-batch process decreased with increasing the reaction time. Therefore, batch-semibatch process was a successful method for controlling the size, i.e., a narrow distribution of a particle size which ranges to several microns.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.345-356
• /
• 1994

Each of the three cationized compounds synthesized previously, poly(OMA-co-DAMA)[PODC], poly(DMA-co-DAMA)[PDDC] and poly(EMA-co-DAMA)[PEDC] was blended with waxes, emulsifiers and cationized fatty carbamide(ODTCC) synthesized in this study for the preparation of some durable softening water-repellenting agents, PODCW, PDDCW and PEDCW. The results of washability, tearing strength, crease recovery and contact angle of the cotton fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed remarkable improvement of the physical properties. Rating of water repellency of cotton fabric treated with PODCW was 80, but those treated with PDDCW and PEDCW were not high enough to use in industry. Proper curing temperature of the synthesized water-repelleting agents was $140^{\circ}C$; proper using concentration was 3wt%; sodium acetate was the best catalyst for water-repellenting agents among the used, and proper concentration was 0.6wt%. From the results of reaction mechanism of cellulosic fiber with water-repellenting agent and washability of the fibers treated with water-repellenting agents the prepared water-repellenting agent proved to be durable. Surface structures of cotton fabrics treated with water-repellenting agent were investigated by SEM.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.466-470
• /
• 2008

The objective of this study is to convert methane into hydrogen using a nanoporous catalyst in the $CO_2$ containing syngas generated from the gasified waste. For the purpose, $Ni/Al_2O_3$ catalyst was prepared with the one-pot method. According to analyses of the catalyst, three dimensionally linked sponge shaped particles were created and the prepared nanoporous catalysts had larger surface area and smaller particle size and more uniform pores compared to the sphere shaped commercial catalyst. The catalyst for reforming reaction gave the highest $CH_4$ conversion of 91%, and $CO_2$ conversion of 92% when impregnated with 16 wt% of Ni at the reaction temperature of $750^{\circ}C$. At that time, the prepared catalyst remarkably improved the $CH_4$ and $CO_2$ conversion up to 20% compared to the commercial one.