• Journal of the Korean Geotechnical Society
• /
• v.39 no.8
• /
• pp.7-16
• /
• 2023

This study aimed to evaluate the sulfate removal capacity of the enzyme-induced carbonate precipitation (EICP) technique through the chemical precipitation of sulfate with calcium ions. The optimal EICP recipe was obtained to retain the excess calcium cations in the solution for the generation of a sufficient amount of calcium carbonate (CaCO₃) mineral. The effect of gypsum precipitation on the EICP-treated sand specimen was investigated by measuring the shear wave velocity and by visual inspection via scanning electron microscopy. The EICP solution using soybean crude urease, as an alternative to laboratory-grade purified urease, exhibited a lower sulfate removal efficiency at a similar CaCO₃ production rate compared with the optimal EICP recipe because of soybean impurities.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.38-52
• /
• 2014

도시주민생활에 없어서는 안 될 주요한 사회간접자본시설인 하수도, 하수도처리시설 등의 콘크리트 구조물에 대한 부식열화는 현재 세계 각국에서 급속히 진행되고 있다. 콘크리트 구조물은 반영구적인 것으로 인식하고 있다. 그러나 각종 열화 인자에 의해 구조물의 사용수명은 급속히 단축된다. 하수시설 내에서는 황산이외에도 다양한 염류에 의하여 콘크리트구조물이 부식될 가능성이 있지만 황산에 의한 부식이 가장 대상범위가 넓고 부식속도가 빠르기 때문에 부식현상이 발견되면 급속하고 적절한 대응조치가 필요하다. 열화예측결과 및 구조물의 공용연수를 감안한 신뢰성이 높은 공법의 도입이 필요하며 이러한 조건에 적합한 유기재료와 무기재료의 복합 특성을 발휘하는 갱생공법에 사용되는 주요 소재의 실험적 특성에 관하여 고찰하였다. 그 결과 경질염화비닐(이하 프로파일)은 내외수압 저항성에서 3분간 $1kgf/cm^2$의 압력에도 누수 및 압력의 이동이 없었으며 약품침지에 따른 중량변화량이 $0.2mg/cm^2$이하로 산에 대한 변화량은 거의 없었다. 주입재인 모르타르의 산성에 대한 저항성은 일반 콘크리트에 비해 우수하였으며 기존 모르타르에 비해 비확선성 또한 우수하였다. 장거리압송시험은 200m까지 안정적인 압송이 가능하여 이 기술에 필요한 요구 성능을 확보한 것으로 나타났다.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.85-103
• /
• 2023

The in-situ remediation of a solidified stratum containing a large amount of fine-texture material like clay or organic matter in contaminated soil faces limitations such as increased remediation cost resulting from decreased purification efficiency. Even if the soil conditions are good, remediation generally requires a long time to complete because of non-uniform soil properties and low permeability. This study assessed the remediation effect and evaluated the field applicability of a methodology that combines pneumatic fracturing, vacuum extraction, and plasma blasting (the PPV method) to improve the limitations facing existing underground remediation methods. For comparison, underground remediation was performed over 80 days using the experimental PPV method and chemical oxidation (the control method). The control group showed no decrease in the degree of contamination due to the poor delivery of the soil remediation agent, whereas the PPV method clearly reduced the degree of contamination during the remediation period. Remediation effect, as assessed by the reduction of the highest TPH (Total Petroleum Hydrocarbons) concentration by distance from the injection well, was uncleared in the control group, whereas the PPV method showed a remediation effect of 62.6% within a 1 m radius of the injection well radius, 90.1% within 1.1~2.0 m, and 92.1% within 2.1~3.0 m. When evaluating the remediation efficiency by considering the average rate of TPH concentration reduction by distance from the injection well, the control group was not clear; in contrast, the PPV method showed 53.6% remediation effect within 1 m of the injection well, 82.4% within 1.1~2.0 m, and 68.7% within 2.1~3.0 m. Both ways of considering purification efficiency (based on changes in TPH maximum and average contamination concentration) found the PPV method to increase the remediation effect by 149.0~184.8% compared with the control group; its average increase in remediation effect was ~167%. The time taken to reduce contamination by 80% of the initial concentration was evaluated by deriving a correlation equation through analysis of the TPH concentration: the PPV method could reduce the purification time by 184.4% compared with chemical oxidation. However, the present evaluation of a single site cannot be equally applied to all strata, so additional research is necessary to explore more clearly the proposed method's effect.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.589-597
• /
• 2010

Strengthening the regulation standard of biological nutrient in wastewater treatment plant(WWTP), the necessity of repair of WWTP which is operated in conventional activated sludge process to advanced nutrient removal treatment is increased. However, in full-scale wastewater treatment system, it is not easy to fine the optimized operational condition of the advanced nutrient removal treatment through experiment due to the complex response of various influent conditions and operational conditions. Therefore, in this study, an upgrading design of conventional activated sludge process to advanced nutrient removal process using the modeling and simulation method based on activated sludge model(ASMs) is executed. And a design optimization of advanced treatment process using the response surface method(RSM) is carried out for statistical and systematic approach. In addition, for the operational optimization of full-scale WWTP, a correct analysis about kinetic variables of wastewater treatment is necessary. In this study, through partial least square(PLS) analysis which is one of the multivariable statistical analysis methods, a correlation between the kinetic variables of wastewater treatment system is comprehended, and the most effective variables to the advanced treatment operation result is deducted. Through this study, the methodology for upgrading design and operational optimization of advanced treatment process is provided, and an efficient repair of WWTP to advanced treatment can be expected reducing the design time and costs.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2008

The differential settlement on ordinary concrete buildings and paved roads are often occurred and which caused the failure of structure. The grouting method can be used for correcting the settlement of the structure. However, the grouting method has a disadvantage like that it takes a long time period to get a desired strength, and it is not a continuous in the phase of reinforced effect. In this paper, as an injecting material called GPCON to complement disadvantage, it is estimated about the characteristic that has a high-density expansion. With the changing of ground conditions and amount of injection, the change of physical strength on compression, the stability against chemical material are studied through the filming of SEM. The physical strength with compression is developed to high strength due to mixing with other material. It is not react with most of the material on chemical conditions except the component of alcohol. Through the SEM test. it is confirmed that the strength of material was increased as formation is being densified.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1076-1086
• /
• 2010

Soil remediation technologies were experimented to evaluate whether the technologies could be used to apply remediation of contaminated marine sediment. In this research, marine sediments were sampled at "Ulsan" and "Jinhae" where remediation projects are considered, and then the possibility of heavy metal removal was evaluated throughout the technologies. Heavy metal concentration of silt and clay fraction was higher than that of sand fraction at "Ulsan". Heavy metal removal of the silt and clay fraction was arsenic (As) 81.5%, mercury (Hg) 93.8% by particle separation, cadmium (Cd) 72.2%, mercury (Hg) 93.8% by soil washing technology, cadmium (Cd) 70.8%, lead (Pb) 65.6% by another soil washing technology. Based on experimental results, tested particle separation and soil washing technologies could be used to remove heavy metals of sand fraction and silt and clay fraction. Heavy metal removal by soil washing technology which was composed of separation, washing and physical or chemical reaction by additives such as acid, organic solvents was more effective comparing to that of particle separation. Since heavy metal concentration of all treated samples was suitable for national soil standards, all the tested technologies were could be used not only to remove heavy metals of marine contaminated sediment but also to reuse treated samples in land.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.479-479
• /
• 2016

국내 하천에는 하천을 가로지르는 보나 낙차공과 같은 횡단구조물이 약 5만여개에 달하고 있다. 이러한 보/낙차공과 같은 하천횡단구조물에는 구조물을 월류하여 떨어지는 부분의 세굴을 막기 위하여 apron(물받이공)을 조성하도록 되어있고, 물받이공 하류부 세굴을 막기 위하여 사석을 깔거나, 돌망태를 설치하여 이 부분에서의 세굴을 막아 하상을 보호하도록 하고 있다. 그러나 사석이나 돌망태공, 블록을 이용한 보호공은 한 번 설치되면 이들 공법이 제자리에 남아 있는 한 세굴 방지에 좋은 효과를 발휘한다는 장점이 있지만 포설된 공법은 시간이 지남에 따라 혹은 홍수로 인해 이동되거나 소실되는 문제가 발생되며, 최종적으로 하천횡단구조물의 안전성에도 영향을 미치게 된다. 이와 더불어 강우량의 증대 및 집중호우 등 돌변하는 기후변화로 하천환경변화에 대한 적용 가능한 기술이 미비하다. 따라서 하천에 유해한 물질을 방출시키지 않고 하천환경 및 하천 생물의 생활사에 영향을 주지 않는 무 저독성 소재를 활용하여 치수적으로 수리적 안정성을 강화시키고, 생태적으로도 건강한 생태하천 복원 기술개발이 요구되는 실정이다. 본 연구에서는 무독성 소재를 활용하여 보 하류부에 자연친화적인 하상보호공으로 다층다공성 하상보호기술을 개발하였으며, 개발된 하상보호기술을 CFD 3차원 수치해석과 실내실험을 통하여 수리적 안전성을 검토하였다. 또한 개발된 기술은 김해시 대청천 하류 일부구간에 시범적으로 적용하였고, 시범사업 시공 전 중 후 각 단계에서 물리, 화학, 생물 모니터링을 통하여 개발기술의 현장 적용성을 검증하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.61-68
• /
• 2019

As the pollution of water resources deteriorates due to industrialization and urbanization, it is difficult to supply clean water through a water treatment method using chlorine. Therefore, the introduction of advanced water treatment facilities using ozone is on the increase. However, epoxy which is used as waterproofing and anticorrosives and stainless steel used in conventional waterproofing and anti-corrosive methods have deteriorated because of the strong oxidizing power of ozone, causing problems such as leaking. Moreover, it even causes the durability degradation of a concrete. Therefore, in this study, metal spraying system was used as the means of constructing a metal panel with excellent ozone resistance and chemical resistance which is an easier method than an existing construction method. Ozone resistance was evaluated in accordance with the type of metal sprayed coatings to develop a finishing method which can prevent the concrete structure of water treatment facilities from deterioration. Furthermore, electrochemical stability in actual sewage treatment plant environment was evaluated. Experimental results showed that Ti has superior ozone resistance after spraying and the electrochemical stability in the sewage treatment plant environment showed that Ti has the highest polarization resistance of $403.83k{\cdot}{\Omega}{\cdot}cm^2$, which ensures high levels of durability.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.131-142
• /
• 2003

The characteristics of electroosmosis drainage in clayey soil were investigated, when an electrokinetic technique was applied for the purpose of separating heavy metals in contaminated ground. A series of laboratory tests, considering voltage, zeta potential, pH distribution, and current, were performed for a lead-contaminated kaolin. The results of laboratory tests were compared with numerical analysis of finite difference method. The 1311owing conclusions were obtained: The flow velocity in electroosmosis was very sensitive to the chemical and electrical characteristics of the clay. As the concentration of ion increases, the flow rate decreases and the amount of drainage also decreases as time elapses.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1997.10a
• /
• pp.52-53
• /
• 1997

수역의 유기오염 개선을 위하여 생활하수, 산업폐수 등의 저하시키는데 주안점을 두어왔으나 공공수역에서의 제거되지 않은 질소와 인의 유입으로 부영양화가 진행되어 하천에는 남조류가 대량발생하고 해역에는 적조가 광역에서 발생하여 큰 사회문제가 되고 있고, 질소와 인의 유입으로 인한 자생 COD가 전체COD의 약 절반을 차지하고 있는 실정이다. 따라서 앞으로의 수질을 개선하기 위해서는 조류증식의 제한인자인 질소와 인의 규제가 필요할 뿐만아니라 하수처리장에 고차처리를 적용하거나, 해양의 회석자용을 이용한 Ocean을 적용하여 연안해역 수질을 관리해야 할 것이다. 따라서 본 연구는 수영만을 대상으로 Ocean Outfall과 폐수처리시절을 적절하게 조합하기 위해서 3차원 생태계모델을 적용하여 유기물질 뿐만 아니라 영양염류인 질소와 인의 농도를 예측하여 환경기준을 만족시키고 비용을 최소화 할 수 있는 폐수처리공법과 해중방류관의 위치를 선정하고자 하였다. 본 연구결과 수영만의 1994년 COD는 II등급, DIN과 DIP는 III등급이었다. 현재의 활성슬러지공법으로 질소와 인을 제거하지 않고 방류할 경우 2001년에 는 하수처리량의 증가로 인해 COD의 경우 1994년 보다 조금 감소하지만 DIN 과 DIP는 1994년과 같은 III등급을 유지하였다. 고도처리공법을 도입할 경우 COD의 농도는 광안리와 해운대해수욕장에서 I등급을 보이고, DIP의 농도도 수영만 전체에서 강등급을 보이지만, DM의 농도는 광안리해수욕장에서 II등급, 해운대해수욕장에서 IH등급을 보였다 하수처리장 유출수를 Ocean Outfall을 이용하여 하수처리장으로부터 4km에 서 방류할 경우의 COD농도는 I등급을 보이고, DE 농도도 광안리와 해운대해 수욕장에서는 I등급을 보이고, DU의 농도는 ll등급을 보여 수질이 개선된 것 을 볼 수 있다. 이상에서와 같이 광안리와 해운대해수욕장의 해역환경기준 ll등급을 만족 하는 하수처리방법은 Ocean Outfall이었다. 수영하수처리장에 인을 처리하기 위한 화학적 침전법의 경우 956억원이 소요되고, 질소를 제거하기 위한 질소제거공정을 추가 건설 할 경우는 2181억원이 전요된다. 그리고 두공정을 같이 건설할 경우에는 3137억원의 비용이 소요된다 수영하수처리장에서 4km 거리와 관경을 2m의 Ocean Outfall 건설비용은 325 억원 정도가 소요되는 것으로 산출되었다. 고차처리시 증가되는 비용으로 건설할 수 있는 Ocean Outfall의 길이는 인 제거공정을 첨가하는 경우에는 18km을 건설할 수 있고, 질소제거공정을 첨가 하는 경우에는 46km를 건설할 수 있는 것으로 산출되었다.