• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.394-399
• /
• 2015

In this study, the Cu catalyst decorated with activated carbon fibers were prepared for improving $SO_2$ adsorption properties. Flame retardant and heat treatments of Lyocell fibers were carried out to obtain carbon fibers with high yield. The prepared carbon fibers were activated by KOH solution for the high specific surface area and controlled pore size to improve $SO_2$ adsorption properties. Copper nitrate was also used to introduce the Cu catalyst on the activated carbon fibers (ACFs), which can induce various reactions in the process; i) copper nitrate promotes the decomposition reaction of oxygen group on the carbon fiber and ii) oxygen radical is generated by the decomposition of copper oxide and nitrates to promote the activation reaction of carbon fibers. As a result, the micro and meso pores were formed and Cu catalysts evenly distributed on ACFs. By Cu-impregnation process, both the specific surface area and micropore volume of carbon fibers increased over 10% compared to those of ACFs only. Also, this resulted in an increase in $SO_2$ adsorption capacity over 149% than that of using the raw ACF. The improvement in $SO_2$ adsorption properties may be originated from the synergy effect of two properties; (i) the physical adsorption from micro, meso and specific surface area due to the transition metal catalyst effect appeared during Cu-impregnation process and ii) the chemical adsorption of $SO_2$ gas promoted by the Cu catalyst on ACFs.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.615-620
• /
• 2015

Polypropylene (PP)/bamboo fiber (BF) composites were fabricated by twin screw extruder in order to investigate effects of the compatibilizer on physical properties of PP/BF composites. The content of BF changed from 10 to 25 wt% and that of the compatibilizer was fixed at 3 wt%. Maleic anhydride grafted PP (PP-g-MAH) was used to increase the compatibility between PP and BF as a compatibilizer. Chemical structures of the composites were confirmed by the existence of carbonyl group (C=O) stretching peak at $1,700cm^{-1}$ in FT-IR spectrum. Considering the degradation and mechanical properties, the optimum extrusion conditions were selected to be $210^{\circ}C$ and 100 rpm, respectively. There was no distinct changes in melting temperature of the composites, but the crystallization temperature increased by $10-20^{\circ}C$ owing to the heterogeneous nuclei of BF. It was checked that the optimum BF content was in the range of 15-20 wt% from the results of tensile and flexural properties of the composites. The effect of the compatibilizer on mechanical properties was confirmed by SEM images of fractured surface and contact angles.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.220-228
• /
• 2003

This study was to examine the thermodynamic features of polyelecrolytic adsorption of polyamidoamine-epichlorohydrin(PAE) in a papermaking wet-end. The PAE adsorption experiments were conducted in a stirred jar containing an aqueous fibrous suspension and evaluated in terms of Langmuir and Freundlich parameters. The electrokinetic property of a stock was examined by measuring the zeta potential of each colloidal suspension. The polyelectrolytic PCD titration was employed to determine the adsorbed amounts of PAE polymer. The zeta potential of a stock, being varied significantly depending upon the addition of PAE polymer, showed initially a sharp increase and later an exponential decay as a function of time . The PAE adsorption exhibited a pseudo-Langmuir adsorption behavior at$20^{\circ}C$ , whereas its Freundlich power(v) increased in a proportional way at an elevated temperature. The train numbers calculated on the basis of adsorption thermodynamics were 7 to 8. The length of the extended loop of PAE was calculated as 215 nm at $20^{\circ}C$ and increased at a rate of 9% at every $10^{\circ}C$ rise in temperature. The PAE adsorption was proven to be an exothermic physisorption with the estimated adsorption enthalpy of -27 to -29 kJ/mol.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.112-117
• /
• 2017

This study demonstrated the emission of combustion gases of medium density fibreboard (MDF)s coated with piperazinomethyl-bis-phosphonic acid (PIPEABP), methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP), N,N-dimethylethylenediaminomethyl-bis-phosphonic acid (MDEDAP), or bis-(dimethylaminomethyl) phosphinic acid (DMDAP). Each MDFs were coated in three times with a brush with 15 wt% aqueous solution of the phosphorus-nitrogen acid additives. After the specimens were dried at room temperature, the emission of combustion gases was tested using a cone calorimeter (ISO 5660-1, 2). The peak smoke production rate ($SPR_{peak}$) of the specimens coated with phosphorus-nitrogen acids was 18.5 to 41.5%, which is lower than that of using the virgin plate. However, the production of peak carbon monoxide ($CO_{peak}$) was 6.7 to 24.2% higher than that of using the virgin plate. Also, the peak carbon dioxide ($CO_{2peak}$) was 4.2 to 24.4% lower than that of using virgin plate. While the peak oxygen depletion rate was much higher than the level of 15%, which can be fatal to humans and the resulting risk could thus be eliminated. Overall, the combustibility of coated specimens was partially suppressed, but showed a negative effect on the reduction of carbon monoxide.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.246-253
• /
• 2017

This study was conducted prepare spray-dried powder using pumpkin sweet potato hydrolysates and examine the physicochemical properties of the powder. The insoluble dietary fiber and soluble dietary fiber of the pumpkin sweet potato treated by enzyme were 4.17% and 2.07%, respectively. The spray-dried pumpkin sweet potato hydrolysates was manufactured via spray-drying with different forming agents: i.e., pectin 0.1%, 0.5%, 1%, and 2.0%. The moisture contents and total starches of the spray-dried powders were approximately 1.68-2.46 and 45.32-46.51%, respectively. The color of the L and a value decreased, and that of the b and ${\Delta}E$ value increased. The particle size and outer topology of the spray-dried powders were $37.17-42.32{\mu}m$, and its shape was generally globular. The water absorption index of the spray-dried powder (1.74-1.91) was lower than that of the freeze-dried powder (2.15). The water solubility index of the spray-dried powder, 80.75-87.61%, was higher than that of the freeze-dried powder (70.47%). The adhesion values of spray-dried powder to epithelial HT-29 cells were 2.66-6.18% of the initial cell counts, whereas freeze-dried powder showed lower adhesive ability (1.79%). The in vitro human digestibility in the spray-dried powder was 70.09% which is very effective in digestion.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.51-51
• /
• 2019

참취(Aster scaber)는 국화과에 속하는 여러해살이식물로 취나물로 분류되어 전국에서 재배되고 있으며 주로 남부지역에서 조기재배 작형으로 많이 재배하고 있다. 참취의 잎과 줄기는 맛과 향기가 독특하여 예로부터 생채, 묵나물 등으로 이용되어 왔으며 칼슘, 철분, 비타민 A 등이 풍부하여 건강식품으로서도 가치가 높고 한약재로도 사용되기도 한다. 최근에는 항암효과와 더불어 콜레스트롤을 저하시키는 약리적 효능이 있는 것으로 밝혀져 기능성 식품으로도 각광 받고 있다. 참취 시설재배 시 통상 3년 마다 갱신이 이루어지고 있는데 그 이유로는 시설재배지 특성상 양분의 과다투입에 의한 염류집적과 잦은 관수로 물리성이 악화되어 참취의 생육이 저하되어 수량이 감소하는 결과를 초래한다. 본 연구는 토양개량제 처리에 따른 참취의 생육과 토양 물리화학성에 미치는 영향을 검토하여 참취 시설재배 농가에 활용할 수 있는 방안을 개발하고자 시험을 수행하였다. 2018년 4월부터 2019년 9월까지 전라북도 농업기술원 허브산채시험장에서 참취 시설재배를 대상으로 하고 무처리, 볏짚 1,000 kg/10 a, 왕겨 숯 1,000 kg/10 a, 야자섬유 1,000 kg/10 a, 4처리구로 하여 시기별 생육 및 토양특성을 조사하였다. 수확기 참취 생육특성은 초장은 25.6~27.2 cm, 엽장은 8.5~9.7 cm, 엽폭은 6.3~7.0 cm, 경직경은 4.3~4.6 cm, 및 수량은 $3.3{\sim}4.0kg/3.3m^2$으로 볏짚 처리구에서 대조구에 비해 좋은 생육 상황을 보였으며 수량성 또한 많았다. 시험 후 토양화학적 특성을 조사한 결과 토양 pH는 7.4~7.5, 토양유기물 함량은 34~36 g/kg, 유효인산 함량은 386~415 mg/kg 이었으며 처리 전 토양에 비하여 유기물 함량은 증가하고 유효인산은 낮아지는 경향을 보였다. 치환성 양이온 K, Ca, Mg는 K는 $0.8{\sim}1.0cmol_c/kg$로 낮아졌고, Ca와 $8.9{\sim}10.1cmol_c/kg$, Mg는 $3.1{\sim}3.4cmol_c/kg$로 증가하였다. 토양물리성의 변화는 왕겨숯 시용에서 대조구에 비해 가장 낮은 용적밀도 $1.22g/cm^3$와 가장 높은 공극률 54.09%을 보였다. 토양 삼상은 고상은 볏짚에서 51.98%로, 액상은 야자섬유에서 28.64%로, 기상은 왕겨숯에서 29.35%로 가장 높았다. 참취 시설재배지 토양개량제 시용함으로써 토양의 유기물함량 증가와 토양의 용적밀도 감소와 토양양 공극율 증가 등 토양의 물리 화학성을 개선할 수 있을 것으로 기대된다. 본 연구는 2년차 시험 결과로서 3년차에 재검토할 계획이다.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.574-581
• /
• 2022

Nanofibers comprising reduced graphene oxide (rGO) and Mo₂C/Mo₂N nanoparticles (Mo₂C/Mo₂N rGO NFs) were prepared for a functional interlayer of Li-S batteries (LSBs). The well-dispersed Mo₂C and Mo₂N nanoparticles in the nanofiber structure served as active polar sites for efficient immobilization of dissolved lithium polysulfide. The rGO nanosheets in the structure also provide conductive channels for fast ion/electron transport during charging-discharging and ensured reuse of lithium polysulfide during redox reactions through a fast charge transfer process. As a result, the cell assembled with Mo₂C/Mo₂N rGO NFs-coated separator and pure sulfur electrode (70 wt% of sulfur content and 2.1 mg cm^-2 of sulfur loading) showed a stable discharge capacity of 476 mA h g^-1 after 400 charge-discharge cycles at 0.1 C. Furthermore, it exhibited a discharge capacity of 574 mA h g^-1 even at a high current density of 1.0 C. Therefore, we believe that the proposed unique nanostructure synthesis strategy could provide new insights into the development of sustainable and highly conductive polar materials as functional interlayers for high performance LSBs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.519-529
• /
• 2009

Fiber reinforced composite materials have various advantages in mechanical and chemical aspects. Not only high fatigue and chemical resistance, but also high specific strength and stiffness are attained, and therefore, damping characteristics are beneficial to marine piles. Since piles used for marine structures are subjected to compression and bending as well, detailed research is necessary. Current study examine the mechanical behavior under flexural and/or compressive loads using concrete filled fiber reinforced plastic composite piles, which include large size diameter. 25 pile specimens which have various size of diameters and lengths were fabricated using hand lay-up or filament winding method to see the effect of fabrication method. The inner diameters of test specimens ranged from 165 mm to 600 mm, and the lengths of test specimens ranged from 1,350 mm to 8,000 mm. The strengths of the fill-in concrete were 27 and 40 MPa. Fiber volumes used in circumferential and axial directions are varied in order to see the difference. For some tubes, spiral inner grooves were fabricated to reduce shear deformation between concrete and tube. It was observed that the piles made using filament winding method showed higher flexural stiffness than those made using hand lay-up. The flexural stiffness of piles decreases from the early loading stage, and this phenomenon does not disappear even when the inner spiral grooves were introduced. It means that the relative shear deformation between the concrete and tube wasn't able to be removed.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.2
• /
• pp.184-205
• /
• 1995

Background: Pulmonary toxicity by bleomycin has multiple mechanisms including direct tissue toxicity due to oxygen-derived free radicals and indirect toxicity through amplification of pulmonary inflammation. To evaluate the effect of chelators or free radical scavenger to lung damage induced by bleomycin, penicillamine as a copper chelator, deferoxamine as an iron chelator and vitamin E as a free radical scavenger were administered. Methods: Two hundred Wistar rats were divided into five groups: Control, bleomycin treated, bleomycin-penicillamine treated, bleomycin-deferoxamine treated, and bleomycin-vitamin E treated groups. Rats sacrificed on day 1, day 3, day 4, day 7, day 14, and day 28 after treatment. Bronchoalveolar lavage, light microscopic and immunohistologic studies for type I, III, IV collagens, fibronectin, laminin and NBD phallicidin were evaluated. Results: There was a significant increase in the total cell counts of bronchoalveolar lavage on day 1 from all treated animals and vitamin treated group showed an abrupt decrease in total cell counts with decrease of neutrophils on day 3. Bleomycin-vitamin E treated group had the least histologic changes such as pulmonary fibrosis. The alveolar basement membranes were positive for type IV collegen and laminin. Basement membranes of bleomycin, bleomycin-penicillamine, or bleomycin-deferoxamine treated groups were disrupted and fragmented on day 4 or 7. The bleomycin-vitamin E treated group had intact basement membranes until day 28. Conclusion: Bleomycin-induced pulmonary fibrosis was related to the severity of acute injury to oxygen radicals or activation of neutrophils and disruption of basement membrane. Vitamin E seemed to be the most effective antioxidant in the inhibition of bleomycin-induced pulmonary injury and fibrosis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.80-86
• /
• 2020

This study was conducted to research on the efficacy of chemical treatment as an effective method for reducing mycotoxin in rice straw silage. As a chemical treatment method, ammonia and sodium hydroxid were treated at 4% level of rice straws contaminated with mycotoxin, and the effects of silage storage on fungal toxin reduction, fermentation quality, and fiber digestion were evaluated. Aflatoxin B₁, B₂, G₁, G₂ and fumonisin B₁, B₂ as well as deoxynivalenol were not detected in all experimental groups, and ochratoxin A and zearalenone were detected. Ochratoxin A was detected lower in the chemical treatment than control (41.23 g / kg) (p<0.05). Zearalenone showed lower results in sodium hydroxide treatment (297.44 ㎍ / kg) than control (600.33 ㎍ / kg) and ammonia treatment (376.00 ㎍ / kg) (p<0.05). The pH of rice straw silage was the lowest in ammonia treatment and the highest in sodium hydroxide treatment (p<0.05). The lactic acid contents of control and ammonia treatments were similar, but sodium hydroxide treatment was the lowest (p<0.05). Propionic acid was higher in the control than in the chemical treatments (p<0.05), and showed similar contents in the ammonia and sodium hydroxide treatment. Both the rumen microbial degradation rate of NDF and ADF showed the highest in sodium hydroxide treatment, followed by ammonia treatment, and the control showed the lowest level (p<0.05). Therefore, the results of this study are demonstrated to have a good effect on the treatment of ammonia and sodium hydroxide to reduce the mycotoxins and increase the rumen microbial degradation rate in the rice straw silage. Sodium hydroxide treatment was more effective in reducing mycotoxins and improving fiber degradation rate than ammonia treatment, but it is thought to have an inefficient effect on silage fermentation in rice straw silage.