• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.26-33
• /
• 2012

This paper reported on the effect of blended activator on the physical properties of alkali-activated slag mortar. Five different activators(caustic alkalis) were used: sodium hydroxide(NaOH, A Case), calsium hydroxide($Ca(OH)_2$, B Case), magnesium hydroxide($Mg(OH)_2$, C Case), aluminum hydroxide($Al(OH)_3$, D Case), and potassium hydroxide(KOH, E Case). We blended five caustic alkalis with sodium carbonate($Na_2CO_3$). The dosage of five caustic alkalis was 3M and sodium carbonate was 1M, 2M and 3M. The result of flow and setting time was decrease as the dosage of sodium carbonate increase. But the compressive strength was increase as the dosage of sodium carbonate increase. It was shown that there is a good effect of blended caustic alkalis with sodium carbonate in alkali-activated slag mortar.

• English Language & Literature Teaching
• /
• v.9 no.spc
• /
• pp.131-148
• /
• 2003

This paper, conducted within the GB framework, investigates inversion phenomena in the functional categories, Focalization Phrases and Topicalization Phrases. The leading idea of this paper is that formal feature checking in these two functional categories is mostly responsible for inversion in which either verb or auxiliary verbs appear in front of subjects and also it will try to find an answer to the following questions: "What are the features that trigger the inversion?" and "Can all the inversion constructions explained by Haegeman's Focalization & Topicalization?" My discussion is largely based on English inversion constructions such as wh-inversion, negative inversion, and adverbial inversion. Also I will show there are some problems in Topicalization and Focalization analysis to explain some inversion constructions and present Rizzi(1999)'s analysis for those problems.

• Journal of Korea Foundry Society
• /
• v.30 no.4
• /
• pp.147-150
• /
• 2010

An eco-friendly production technique of Al-8.6Ti-0.025C refiner was developed by melting a Al-Ti master alloy in a graphite crucible, in which the potential nucleation site, TiC effectively formed by the spontaneous in-situ reaction between excessive Ti and carbon from graphite crucible. The A3003 alloy refined by the Al-8.6Ti-0.025C showed effectively refined macrostructure and enhanced mechanical properties comparable to the commercial Al-Ti-B refiner. The effective refinement was achieved in a shorter compare to the melt-treating time commercial Al-Ti-B refiner.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.497-501
• /
• 1999

The changes of properties were studied for the polypropylene(PP)/Nylon6 blends containing different kinds of compatibilizer made by either reactive extrusion of solution reaction. The compatibilizers were PP grafted with maleic anhydride (MAH) made by reactive extrusion and solution reaction. The grafted MAH contents were 0.3 wt %, and 2.7 wt %, respectively. The composition of the PP/nylon6 blend was fixed at 75/25 by weight. Blending was carried out with twin-screw extruder (L/D=30, ${\psi}=30$) at 300 rpm. As the content of PP-g-MAH was increased, the crystallization peak of Nylon6 decreased gradually then finally disappeared. Disappearance of crystallization peak of Nylon6 was mostly affected by grafted MAH content rather than the preparation method and the amount of compatibilizer. The portion of Nylon6 that could not crystallize in its normal crystallization temperature crystallized together with PP at the crystallization temperature of PP. So called concurrent crystallization was observed. Meanwhile two more peaks were observed during heating cycle. One was exothermic peak at $193^{\circ}C$ near to crystallization temperature of Nylon6, the other was endothermic peak at $215^{\circ}C$ that was $5^{\circ}C$ lower than normal endothermic peak of Nylon6. To analyze the peaks, nylon6 was annealed in the differential scanning calorimeter. As a result, the peak at $193^{\circ}C$ was crystallization peak of imperfect crystalline of Nylon6 and the other peak at $215^{\circ}C$ was melting peak of imperfect crystalline of nylon6.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.497-500
• /
• 2003

문서에 여러 가지 화제가 혼합되어 있는 문서에서 화제의 실마리 부분을 특정화하여 각 화제별 단락을 추출하는 기술은 정보검색 분야에서 중요한 역할을 담당하는 기술이다. 잘 정의된 분야체계에 따라 구축된 분야연상어를 이용하여 단락분할을 시도한다. 분야연상어는 특정한 분야를 정확하게 연상할 수 있는 단어로서 잘 분류된 문서 컬렉션에서 구축할 수 있다. 이 분야연상어를 이용하여 문서를 관련된 분야변로 추출하여 의미기반 단락추출 방법을 제안한다. 화제의 계속성에 주목하여 분야연상어의 수준(범위)이나 연속출현성에 의해 계산된 계속도에 의해 화제의 실마리를 추적하고, 화제의 전환성을 고려한 방법을 제안한다. 문서 내 각 화제의 단락구분을 명확히 하여, 단락을 화제분야별로 추출하는 방법을 제안한다. 50문서를 실험한 결과 82%의 정확율과 63%의 재현율을 얻어 실용성을 기대할 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.400-402
• /
• 2008

본 연구는 오염토양 내 구리를 효과적으로 고정화시키는 조건을 찾고자 고정화제의 주입농도를 변화시켜가며 실험을 진행하였으며, 실험결과 고정화제의 주입농도가 높을수록 구리제거효율도 높아지는 것으로 나타났으며 3mole의 인산염을 주입했을 때 98%이상의 높은 제거효율을 보였다. 또한 잔류인의 농도를 낮추고 고정화반응을 촉진시키기 위해 알칼리제를 투입하였을 때, 알칼리제의 농도가 높을수록 구리오염 농도와 잔류인의 농도가 더욱 낮아짐을 알 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.93-101
• /
• 2014

In this study, a blast furnace slag having latent hydraulic property with an alkaline activator for resource recycling was used to solidify sand without using cement. Existing chemical alkaline activators such as $Ca(OH)_2$ and NaOH were used for cementing soils. An alkaliphilic microorganism, which is active at higher than pH 10, is tested for a new alkaline activator. The alkaliphilic microorganism was added into sand with a blast furnace slag and a chemical alkaline activator. This is called the microorganism alkaline activator. Four different ratios of blast furnace slag (4, 8, 12, 16%) and two different chemical alkaline activators ($Ca(OH)_2$ and NaOH) were used for preparing cemented specimens with or without the alkaliphilic microorganism. The specimens were air-cured for 7 days and then tested for the experiment of unconfined compressive strength (UCS). Experimental results showed that as a blast furnace slag increased, the water content and dry density increased. The UCS of a specimen increased from 178 kPa to 2,435 kPa. The UCS of a specimen mixed with $Ca(OH)_2$ was 5-54% greater than that with NaOH. When the microorganism was added into the specimen, the UCS of a specimen with $Ca(OH)_2$ decreased by 11-60% but one with NaOH increased by 19-121%. The C-S-H hydrates were found in the cemented specimens, and their amounts increased as the amount of blast furnace slag increased through SEM analysis.

• Computational Structural Engineering
• /
• v.1 no.2
• /
• pp.131-142
• /
• 1988

This study was carried out to investigate the long-term deformation of superplasticized concrete. Compressive strength, shrinkage, creep and creep recovery of concretes with and without the superplasticizing admixture have been compared for one year. The test results on creep of superplasticized concrete were also compared with three methods of predicting creep; the ACI model, the CEB model and the BP model. According to test results, superplasticized concrete has good results in compressive strength at an age of 28 days of more than 22%, drying-shrinkage cured at air-conditioned storage less than 15%, creep deformation in air conditioned storage and loaded at an age of 28 days to 15% of compressive strength less than 11% of control concrete.

• Monthly Korean Chicken
• /
• s.129
• /
• pp.81-83
• /
• 2006

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.745-752
• /
• 2012

This paper studies the effect of the compressive strength for combined alkali-activated slag mortars. The effect of activators such as alkali type and dosage factor on the strength was investigated. The alkalis combinations made using five caustic alkalis (sodium hydroxide (NaOH, A series), calcium hydroxide ($Ca(OH)_2$, B series), magnesium hydroxide ($Mg(OH)_2$, C series), aluminum hydroxide ($Al(OH)_3$, D series), and potassium hydroxide (KOH, E series)) with sodium carbonate ($Na_2CO_3$) were evaluated. The mixtures were combined in different dosage at 1M, 2M, and 3M. The study results showed that the compressive strength of combined alkali-activated slag mortars tended to increase with increasing sodium carbonate. The strength of combined alkali-activated slag mortars was better than that of control cases (without sodium carbonate). The result from scanning electron microscopy (SEM) analysis confirmed that there were reaction products of calcium silicate hydrate (C-S-H) and alumina-silicate gels from combined alkali-activated slag specimens.