• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2000

We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.5-15
• /
• 2001

For estimating paddy field area with Landsat TM images, two dates, May 31, 1991 (transplanting stage) and August 19, 1991 (heading stage) were selected by the data analysis of digital numbers considering rice cropping calendar. Four different estimating methods (1) rule-based classification method, (2) supervised classification(maximum likelihood), (3) unsupervised classification (ISODATA, No. of class:15), (4) unsupervised classification (ISODATA, No. of class:20) were examined. Paddy field area was estimated to 7291.19 ha by non-classification method. In comparison with topographical map (1:25,000), accuracy far paddy field area was 92%. A new image stacked by 10 layers, Landsat TM band 3,4,5, RVI, and wetness in May 31,1991 and August 19,1991 was made to estimate paddy field area by both supervised and unsupervised classification method. Paddy field was classified to 9100.98 ha by supervised classification. Error matrix showed 97.2% overall accuracy far training samples. Accuracy compared with topographical map was 95%. Unsupervised classifications by ISODATA using principal axis. Paddy field area by two different classification number of criteria were 6663.60 ha and 5704.56 ha and accuracy compared with topographical map was 87% and 82%. Irrespective of the estimating methods, paddy fields were discriminated very well by using two-date Landsat TM images in May 31,1991 (transplanting stage) and August 19,1991 (heading stage). Among estimation methods, rule-based classification method was the easiest to analyze and fast to process.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.640-655
• /
• 2014

Many of today's video systems have additional depth camera to provide extra features such as 3D support. Thanks to these changes made in multimedia system, it is now much easier to obtain depth information of the video. Depth information can be used in various areas such as object classification, background area recognition, and so on. With depth information, we can achieve even higher coding efficiency compared to only using conventional method. Thus, in this paper, we propose the 2D video coding algorithm which uses depth information on top of the next generation 2D video codec HEVC. Background area can be recognized with depth information and by performing HEVC with it, coding complexity can be reduced. If current CU is background area, we propose the following three methods, 1) Earlier stop split structure of CU with PU SKIP mode, 2) Limiting split structure of CU with CU information in temporal position, 3) Limiting the range of motion searching. We implement our proposal using HEVC HM 12.0 reference software. With these methods results shows that encoding complexity is reduced more than 40% with only 0.5% BD-Bitrate loss. Especially, in case of video acquired through the Kinect developed by Microsoft Corp., encoding complexity is reduced by max 53% without a loss of quality. So, it is expected that these techniques can apply real-time online communication, mobile or handheld video service and so on.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.249-255
• /
• 2002

This paper describes on the extraction of ship's real-time movement information using a combination full-function ARPA radar and ECS system that displays radar images and an electronic chart together on a single PC screen. The radar target extractor(RTX) board, developed by Marine Electronics Corporation of Korea, receives radar video, trigger, antenna bearing pulse and heading pulse signals from a radar unit and processes these signals to extract target information. The target data extracted from each pulse repetition interval in DSPs of RTX that installed in 16 bit ISA slot of a IBM PC compatible computer is formatted into a series of radar target messages. These messages are then transmitted to the host PC and displayed on a single screen. The position data of target in range and azimuth direction are stored and used for determining the center of the distributed target by arithmetic averaging after the detection of the target end. In this system, the electronic chart or radar screens can be displayed separately or simulaneously and in radar mode all information of radar targets can be recorded and replayed In spite of a PC based radar system, all essential information required for safe and efficient navigation of ship can be provided.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.884-891
• /
• 2016

A secondary injection system in a diesel engine has benefits: it can be controlled independently without interrupting engine control, it can be adapted to various layouts for exhaust systems, and it pose no reductant dilution problems compared to post injection systems in the combustion chamber or other supplemental reductant injections. In a secondary injection system, the efficiency of the catalyst depends on the method of reducing the supply. The reductant needs to be maintained and optimized with constant pressure, the positions and angles of injector is a very important factor. The concentration and amount of reductant can be changed by adjusting secondary injection conditions. However, secondary injection is highly dependent upon the type of injector, injection pressure, atomization, spray technology, etc. Therefore, it is necessary to establish injection conditions the spray characteristics must be well-understood, such as spray penetration, sauter mean diameter, spray angle, injection quantity, etc. Uniform distribution of the reductant corresponding to the maximum NOx reduction in the DeNOx catalyst system must also assured. With this goal in mind, the spray characteristics and impingement plate types of a secondary injector were analyzed using visualization and digital image processing techniques.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1991.06a
• /
• pp.28-28
• /
• 1991

후두암의 수직절제 수술후의 후두 재건 목적은 기관절개를 통하지 않고 후두를 통한 호흡이 가능하도록 하면서 연하시 기도흡인을 피하기 위한 sphincter 능력의 보존, 그리고 발성이 가능하도록 성대진동 mechanism을 재건하는데 있다. 오늘날 수많은 후두학자들에 의해서 고안 개발된 다양한 재건 방법이 있다. 연자는 광범위한 후두절제에 따른 큰 결손을 메우기 위해 bulky하면서도 점막 상피의 재생이 용이한 재건 피판으로 흉유돌근골막 피판을 이용하여 후두 결손부를 재건하여 보았다. 방법은 성견 3마리를 대상으로하여 thiopental sodium 정맥주사로 전신마취를 시행한 후 설골에서부터 흉골상까지 경부 정중앙의 피부를 절개하고 후두를 노출시켜 후두 수직절제술을 시행하였다. 흉유돌근과 흉골에 부착된 골막을 박리하여 흥유돌근골막 피판을 제작한 후 골막이 후두강 안쪽으로 되도록하여 골막연과 후두점막을 봉합하였다. 그리고 3, 5, 9개월에 후두적출술을 시행하여 병리조직학적 및 수술후 경과를 관찰하였다. 3실험견 모두 기관절개술 없이 후두를 통한 호흡이 가능하였고 흡입성 폐렴이나 피하기종등의 합병증없이 창상이 치유되었으며 발성도 양호하였다. 이식된 골막위로 신생혈관의 출현과 함께 점막재생이 잘되 있었다. 단지 봉합사 주위에 소량의 육아종이 관찰되었다. 조직학적으로는 섬유조직위로 편평상피가 재생되었으며 성문하부에서는 일부 섬모가 있는 호흡기 점막도 관찰되고 골막하부에 신생골 형성은 관찰할 수 없었다. 골막 피판은 그 유연성 때문에 결손부위의 점막연에 맞춰도 tension이 없고 공기 누출이 되지 않게 봉합이 가능할 뿐 아니라 점막이 재생할 수 있는 frame-work의 역할을 하는 것으로 사료되었다. 이상과 같은 사실로 미루어 흉유돌근 자체가 견실하고 골막에 혈류공급이 잘되어 창상치유에 좋을 뿐 아니라 큰 후두결손부의 재건이 가능하리라고 사료되었다.로서 몇가지 앞으로의 치료지침에 도움이 되는 결과를 얻었기에 보고하는 바이다. 1) 성별 분포는 남자 16(39 %), 여자 25 (61%)이었으며 1 : 1.5의 빈도를 보였다. 2) 연령 분포는 20대와 30대에서 남녀 모두 25명으로 대부분을 차지하였다. 3) 부식제의 종류는 빙초산이 26명 (63.4 %)으로 대부분을 차지하였고 염산 7 (17.1 %) Lye 3 (0.7 %) 의 순이었다. 4) 음독후 12시간내에 식도경술을 받은 환자가 3명(0.7 %) 12-24시간에 받은 환자가 17명(41.5 %), 24 - 48시간에 받은 환자가 11명(26. 8%)으로 48시간 내에 시행받은 환자가 전체의 75.6%를 차지하였다. 5) 식도경 검사상 나타난 식도화상은 Grade I 11명 (26.8%) G.ade II 18(43.9%) Grade III 7명(17.1%) 이었으며 Grade II 인 경우가 18명(43.9%)로 가장 많았으며 Grade I 11명(26.8 %), Grade III 7명 (17.1 %) Normal 5명 (12.2 %) 순이었다. 6) 조기 식도경 검사에서 41명중 oral cavity burn이 없었던 경우가 15명(36. 1 %) 이었으며, oral cavity burn이 있었던 26명중 5명(19 .2 %)에서 Esophageal burn이 없었다 특히 Esophageal burn의 Grade II, III 25명 중 9명(29.6 %)에서 oral cavity burn이 없었다. 7) 식도 부식중 환자의 치료 원칙으로 Grade I, II, III에서 항생제 및 보존적 치료를 하였으며 Grade I에선 oral feeding을 시켰고 Steroid는 경우에 따라 투여하였으며 Grade III에선 원칙적으로 사용치 않았다. 식도조영술은 Grade I II III에서 3주 후에 모두 시행하였다. 8) 3주 후 식도조영술을 실

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.419-423
• /
• 1990

This study was carried out to investigate the cause of pith-damaged wood formation, the state of growth, and difference of chemical composition of Japanese Larix(L. leptolepis Gorden). 1. Larix grew normaly to 10 years, and the volume increment was 32.4%. But it was gradually decreased to 19.4% from 11 to 13 years that the heartwood damage was occurred. Therefore, the volume increment was decreased 13%. The decayed wood was formed from fire wound portion of bark by forest fire. The volume loss from pith-dagmaged wood occurred by forest fire was more than 20%. 2. On the ash content, heartwood(0.05%) and pith-damaged wood(0.08%) was lower than sapwood(0.29%). The difference of extractive contents are considered the reason. It is considered that this ash content difference is depend upon the extractive contents among sap, heart and decayed wood parts. Holocellulose contents were from 54.3% to 59.3% and there were no difference among heartwood, pith-damaged wood, and sapwood, On the pentosan contents, heartwood(6.3%) and pith-damaged wood(6.6%) were higher than sapwood. Lignin contents of pith-damaged wood was tower than heartwood (34.4%). This seems to weaken all kinds of wood strength.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.185-221
• /
• 2018

This study examined the process of the formation of Deoneum, Sugungga(水宮歌), and its tendency of the change through the trace of the Pansori masters who worked in 19th century. The time that the main group of the Sugungga masters appeared in the Pansory history is estimated in early 19th century. The Sugungga masters in this time could be divided in two groups, one is the early days masters who worked in early 19th century and the other is the latter days masters who worked in middle and late 19th century. Kwon Sam-deuk(權三得), Song Heung-lok(宋興祿), Yeom Gyeo-dal(廉季達), and Shin Man-yeob(申萬葉) are the Sugungga masters who worked in early 19th century. By the records they left, I could confirm that they used the description about the dramatic characteristics in the work and Soritjo(Pansori master's tonality), like the appearance of 'Bangge(crab)' and 'Tiger', and particularly they developed which has the scene of the Rabbit's deceiving the Dragon King and Rabbit's return, 'Goandaejangja(寬大長者)', 'Gaja-Eoseoga', 'Sojinowha(笑指蘆花)', 'Apnae-Beodeuleun' and the scene of 'Rabbit's curse(the part that Rabbit curses Byeljubu)' etc. I could understand that the interest of the early days Pansori masters about Sugungga is on the characters and the latter part of the work. The separation of Dongpyeonje(東便制) and Seopyeonje(西便制) of Pansori was done in the middle and late 19th century. As the Dongpyeonje master, Song Wu-ryong(宋雨龍), Park Man-sun(朴萬順), Song Man-gab(宋萬甲), Shin Hak-jun(申鶴俊) and Yu Seong-jun(劉成俊) worked. As the Seopyeonje masters, Park Yu-jeon(朴裕全), Kim geo-bok(金巨福), Kim Su-yeong(金壽永) and Baek Gyeong-jun(白慶順) etc. sang Sugungga. The Dongpyeonje masters developed the 'Toggigibyeon(토끼奇變)' related Deoneum paying attention on the latter part of Sugungga same as the early days masters. Meanwhile it looks like that they had interest in developing the parts which belong to the middle and early parts of Sugungga like 'Toggiwhasang(토끼畵像)', 'Gogocheonbyeon(皐皐天邊)' and 'Tobyeolmundab(兎鱉問答)'. The Seopyeonje masters developed the parts belong to the early part of Sugungga, which are related to Dragon King and the courtiers in Sugung palace, like 'YongwangTansik(龍王歎息)'. And I could confirm that they developed the parts influenced by Shin Jaehyo's editorials like 'Tosahobi(兎死狐悲)' and 'Goguksancheon(故國山川)' etc. In short, I could confirm the trend that the Pansori masters in 19th century had interest in from the latter part to the early part of Sugungga. If taking a look focusing on main characters, they moved their interest in from Rabbit to the courtiers including Byeoljubu(鱉主簿) and Dragon King in Sugung palace, and it could say that, in this trend, Sori part and Deoneum were developed.

• Journal of Nutrition and Health
• /
• v.56 no.5
• /
• pp.554-572
• /
• 2023

Purpose: The purpose of the study was to analyze the priorities for educational content regarding precautions to be taken to prevent safety accidents for employees in school foodservice using the Borich priority formula and the Locus for Focus model. Methods: A survey was conducted in February 2019 on 194 employees in elementary school and 122 employees in middle- and high school foodservice in the Jeonbuk area. Demographic characteristics, status of safety accidents, safety education, and their importance and performance levels were assessed using a self-administered questionnaire. The priorities for the educational content on precautions to prevent safety accidents were based on a 3-step analysis method, including the paired sample t-test, Borich priority formula, and the Locus for Focus Model. Results: The average perceived importance of the precautions to be taken against safety accidents of employees in elementary-, middle-, and high schools was higher compared to the average performance of the employees (p < 0.001). The top priority for elementary school employees was caution against falls during the cleaning of the gas hood and the trench in the kitchen. In addition, 'awareness of chemical signs' was added as one of the top priorities of middle- and high school employees. The second highest priority items were 'do stretching', 'safely adjusting workbench height', 'keeping the right attitude', 'using assistive devices when moving heavy things', and 'checking the material safety data sheet', which were the same for all elementary, middle- and high school employees. Conclusion: Thus, to improve the educational preparedness of employees in the area of safety precautions, eight safety/accident prevention items should be included in the safety education program.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.285-320
• /
• 2016

Cartoons and Animation are convergent arts created with a composite application of language arts described in the form of literary texts and sounds, plastic arts visualized in the form of artistic paintings, and film arts produced in the form of moving pictures. An academic university major in cartoons and animation studies established in late 20th century however, did not satisfactorily meet the needs in academic research and development and the free expression of artistic creation was limited. In order to systematize the major in cartoons and animation studies, an convergent approach to establish and clarify following are in demand : the terms and definitions, the historical developments, the research areas and methods, the major education and related jobs and start-ups. New culture and arts industries including cartoons, animation, moving images, and games contents are not yet listed in the industries listing service jointly provided online by the portal site Naver.com and Hyung-Seol publishing company. Above all, cartoons and animation are inseparably related to each other that even if one uses the term separately and independently, the meaning may not be complete. So a new combined term "Animatoon" can be established for the major in cartoons and animation studies and also used for its degree with concentrations of cartoons, animation, moving images, games, and etc. In the Introduction, a new combined term Animatoon is defined and explained the use of this term as the name of the major and degree in cartoons and animation studies. In the body, first, the Historical Developments classified Animatoon in the ancient times, the medieval times, and the modern times and they are analyzed with the help of esthetics and arts using examples of mural frescos, animal painting, religion cartoons, caricatures, cartoons, satire cartoons, comics, animation, 2 or 3 dimensional webtoons, and K-toons. Second, the Research Areas of Animatoon reviewed the theories, genres, artworks, and artists and the Research Methods of Animatoon presented the curriculum that integrated the courses in humanities, science technologies, culture and arts, and etc. Third, the Major Education considered Animatoon education in children, young adults, students of the major and the Related Jobs and Start-Ups explored various jobs relating to personal creation of artwork and collective production of business-oriented artwork. In the Conclusion, the current challenges of Animatoon considered personalization of the artists, specialization of the contents, diversification of the types, and liberalization of the art creation. And the direction of improvement advocated Animatoon to be an academic field of study, to be an art, to be a culture, and to be an industry. The importance of cartoons and animation along with videos and games rose in the 21st century. In order for cartoons and animation to take a leading role, make efforts in studying Animatoon academically and also in developing Animatoon as good contents in the cultural industries.