• Journal of Korea Water Resources Association
• /
• v.48 no.7
• /
• pp.535-543
• /
• 2015

Measurements of multiphase flows containing bubbles have been limited because most existing methods target one phase flows. Especially, multiphase flows with a high void ratio have been rarely successful in measurements due to the sudden change of density and thick interfaces between air and water. This study introduces two methods that are capable of measuring flow fields regardless of bubble void ratio, named bubble image velocimetry and bundle fiber optic flow meter. The calculation of the depth of field is suggested to reduce and estimate errors by perspective image velocimetry. The bundle fiber optic flow meter is designed to increase a measurement rate using many optical fibers with a thin diameter. The two methods measured bubble plumes to test reliability and the velocity measurements show good agreement. In addition a hydraulic jump, one of the multiple flows in rivers was measured to test applicability of the methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.47-52
• /
• 2003

Change detection and analysis is a powerful application of remote sensing, in that the spectral resolution of multi-band sensors can be used to advantage in monitoring both significant and subtle land cover changes over time. In this study, the LANDSAT TM data was used to detect the change areas affected by flood from a heavy rainfall. The study area is the Nakdong River located in the Korea peninsular. Among the several change detection techniques, change vector analysis(CVA), principle component analysis(PCA) and image difference approach are utilized in this paper. CVA uses any number of spectral bands from multi-date satellite data to produce change image that yield information of the magnitude and direction of differences pixel values. And accuracy assessment was carried out with a change image produced from three techniques. In result, CVA was found to be the most accurate for detecting areas affected by flood. CVA with the overall accuracy and Kappa coefficient of 97.27 percent and 94.45 percent, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1035-1046
• /
• 2005

This paper analyzes the channel assignment techniques and their performance in the On Board Processing (OBP) satellite communication system. It suggests the new Continuous Rate Assignment (CRA) and Dynamic Rare Assignment (DRA) for improving the efficiency of channel assignment at the OBP switch. Mathematical analysis and simulation are given to evaluate the system performance. Aggregate real-time and non-real-time services are considered as different classes. Higher priority is given to voice and video real-time services to avoid delay variation. Onboard scheduler uses CRA and DRA ways to arrange the capacity allocation dynamically. An improved algorithm is given to make the channel more efficient by doing some evaluation of the switching matrix.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2043-2052
• /
• 1997

The object-oriented coding technique which is one of the coding methods in very low bit rate environment is suitable for videophone image sequence. The selection of source model affect image analysis. In this paper, an image analysis method for the object-oriented coding is presented. The process is composed of changed region detection andmotion estimateion. First, we use the standard deviation of frame difference as thrreshold to extract themoving area. If thesum of gray values in mask is greater than the threshold, the center pixel of the mask is regarded as moving region. After moving is detected in changed region by edge operator, observation point is determined from moving region. The motion is estimated by 6-parameter mapping method with determined observation point. The experimantal resutls show that the proposed method can significantly improve the image quality.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.55-66
• /
• 1995

Most studies using satellite images have been performed to determine three dimensional positioning by stereoscopic analysis for stereo-pair or to extract digital elevation model by stereo matching using image correlation techniques. Because the small errors on the ground control points have a great impact on the results, however, it is hard to get reliable products when we analyze satellite orbital parameters or acquire digital elevation model by using only stereo-pair. Also, if there are noises, shadows, or clouds on the one of stereo pair, it is difficult to produce DEM(digital elevation model) on the area under analysis or to have good accuracy. In these case, it can be solved by systematic analysis of the multiple stereo images. This paper suggests the improvements on the accuracy of the digital elevation model by the developments of stereoscopic analysis techniques for the triplet of SPOT satellite images on the same area.

• 한국지형공간정보학회:학술대회논문집
• /
• 1995.10a
• /
• pp.99-119
• /
• 1995

Most studies using satellite images have been performed to determine three dimensional positioning by stereoscopic analysis for stereo-pair or to extract digital elevation model by stereo matching using image correlation techniques. Because the small errors on the ground control points have a great impact on the results, honorer, it is hard to get reliable products when we analyze satellite orbital parameters or acquire digital elevation model by using only stereo-pair. Also, if there are noises, shadows, or clouds on the one of stereo pair, it is difficult to produce DEM(digital elevation model) on the area under analysis or to have good accuracy. In these case, it can be solved by systematic analysis of the multiple stereo images. This paper suggests the improvements on the accuracy of the digital elevation model by the developments of stereoscopic analysis techniques for the triplet of SPOT satellite images on the same area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.249-251
• /
• 2020

본 논문에서는 코로나바이러스감염증19 사태가 국내 취업시장에 어떠한 영향을 미쳤는지에 대해 알아보기 위하여 빅데이터를 활용한 직업 관련 분석 및 시각화를 수행하였다. 빅데이터를 위한 기본 자료는 통계청 자료와 워크넷 Open API를 활용하였으며, 빅데이터 처리 과정을 거쳐 결과값을 예측을 시도하였다. 2020년도 워크넷 Open API를 통해 고용수와 통계청 자료를 통해 비교 분석 및 시각화를 실시하였고, 08년~20년 취업자수를 통해 시계열 분석 및 예측을 진행해 앞으로의 횡보를 예상해보았다. 분석한 결과 19년, 20년도를 비교 분석했을 때에는 크게 차이가 나지 않았다. 추가적으로 시계열 분석기법을 활용해 보았을 때 매년 고용수는 전체적으로 증가하고 4월에는 감소, 7월에는 증가하는 추세가 나왔다. 코로나바이러스감염증19 사태로 인해 공공기관과 언택트 시대에 따른 화상회의나 재택근무로 인해 운수·통신 취업률은 상승한다는 결과값이 도출되었고, 자영업이나 서비스 직업 등은 다른 직종에 비해 큰 감소를 보여줬으나 국가 경제 활성화에 따른 고용수는 점차 증가할 것이라 예측된다.

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2009

In this study, both evaluations by visual imaging for exterior view of coating and by EIS were executed for epoxy primer coated specimens deteriorated by accelerated test, and comparison and analysis were carried out for 2 evaluation methods. In the comparison between total damaged area ratio acquired by image processing method and deterioration point, higher deterioration points were appeared for rusted specimens than for non-rusted specimens. It is attributed that deterioration point per unit area ratio given for rust is higher than for peeling. In the comparison between total damaged area ratio and EIS result, impedance of coating was largely decreased as about TEX>$10^4{\Omega}{\cdot}cm^2$ or less when rust area ratio is more than about 0.1%, and blistering area ratio is more than about 3%. Charge transfer resistance ($R_{ct}$) and double layer capacitance ($C_{dl}$) values were appeared for all specimens except 2 ones, which shows that water is accumulated and steel substrate is corroded at coated film-steel interface. In the comparison between deterioration point and EIS result, more than 10 points as deterioration point were given for specimens of below $10^6{\Omega}{\cdot}cm^2$ of impedance at low frequency. For specimens deteriorated by NORSOK cyclic test, impedance was lowest of all, though deterioration point was not high. It is thought to be attributed that coating system and accelerated deterioration condition of cyclic tested specimens were different from those of main specimens. From the result, it is thought that coating resistance can be relatively more decreased than deterioration degree estimated from exterior view under more severe corrosion environment or in the present of more complex deterioration factors.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.155-164
• /
• 1999

In this paper, the prototype of SIS(Simulated Implantation System) for human femoral head is introduced. SIS is a software which carries on a virtual femoral head replacement surgery including 3d visualization as well as various numeric analyses between a patient's femur and artificial femur through certain stages of the image processing and of the computer graphics. Also, processes required after acquiring consecutive CT-images and projected image of an artificial femur are discussed, and the corresponding results including prototype of SIS are given.