• Composites Research
• /
• v.24 no.3
• /
• pp.39-45
• /
• 2011

Adhesive joints are widely used for structural joining applications in various fields and environmental conditions. Polyurethane (PU) and Epoxy adhesives are now being used for liquefied natural gas (LNG) carriers at cryogenic temperatures. This paper presents a comprehensive evaluation of epoxy and PU adhesive bonds between Triplex sheets at normal and cryogenic temperatures. The most significant result of this study is that for all adhesives tested, there is a significant decrease in peel strength at cryogenic temperatures. However, the reasons for the decrease in peel strength for epoxy and PU adhesives differ. Consequently, PU adhesives can be considered better suited for use in applications requiring high bonding performance at cryogenic conditions, such as in LNG carriers.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.4
• /
• pp.222-230
• /
• 2023

In the present work, the scale effect on the Boil-Off Rate (BOR) was investigated based on an analytical method to systematically evaluate the thermal performance of a Liquefied Natural Gas (LNG) Cargo Containment System (CCS). A two-dimensional thermal resistance network model was developed to accurately estimate the heat ingress into the CCS from the outside. The analysis was performed for the KC-1 LNG membrane tank under the IGC and USCG design conditions. The ballast compartment of both the LNG tank and cofferdam was divided into six sections and a thermal resistance network model was made for each section. To check the validity of the developed model, the analysis results were compared with those from existing literature. It was shown that the BOR values under the IGC and USCG design conditions were agreed well with previous numerical results with a maximum error of 1.03% and 0.60%, respectively. A SDR, the scale factor of the LNG CCS was introduced and the BOR, air temperature of the ballast compartment, and the surface temperature of the inner hull were obtained to examine the influence of the SDR on the thermal performance. Finally, a correlation for the BOR was proposed, which could be expressed as a simple formula inversely proportional to the SDR. The proposed correlation could be utilized for predicting the BOR of a full-scale LNG tank based on the BOR measurement data of lab-scale model tanks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.439-445
• /
• 2012

Only the sand carriers fitted with hopper doors can remove their hatch covers in current regulations. However, there is no sand carriers fitted with hopper doors in korea. Through the analysis of accidents, inspection of equipment installed on ships, and evaluation of stability and seakeeping performance concerning the sand carriers, it is expected that the current exemption requirement is modified for hatch covers for sand carriers. As the result, this paper proposed the removal of hatch covers and be fitted by tarpaulin instead to protect water ingress into the holds. This can be done by making the holds smaller designed to be filled full until the top of the hold without exceeding loadline. Also, the bilge pumps should have the sufficient capacity of pumping water out in the early stage of sand-water mixture to wetted condition in approximately 1 hour and be operationally ready in every voyage conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.135-144
• /
• 1994

The coupled vibration of the deck house and stern structure, which was experienced on a 12,900 TDW Ro/Ro ship, has been studied. It was a large-scale vibration problem where the structure resonates with the propeller excitation at the first blade passing frequency. After discussing the structural characteristics of the ship, the vibration characteristics measured ducting the sea-trial are presented and compared with the analysis results which are based on a 3 dimensional finite element(FE) model. The FE model is also used to verify various reinforcement options and to predict their effectiveness. A substantial reduction or the vibration was confirmed during the sea-trial after installing a few selected reinforcement. The forced vibration response, which is computed using the FE model, is compared with the measured data. The change of the vibration characteristics according to loading conditions is also studied.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.71-90
• /
• 2007

To induce container cargos to Gunsan port, we should struggle on securing the quantity of goods transported from the competitive Jeonbuk and Chungcheong areas by reducing transportation expenses by land, and make an activating plan for the international exchange between Gunsan port and nearby ports in China. As a result, if the plan to induce container cargos to Gunsan port is activated, the regular liners will stop at Gusan port. So the new sea route will be opened so that consignors can ship cargos in the proper time. The consignors will use Gunsan port frequently because of the reduction of distribution expenses. To do so, for the first, many incentives should be implemented to attract container cargos. In addition, various facilities should be fully equipped and improved. This paper is to improve the problems for which consignors, the shipping lines and forwarders may feel uncomfortable when they use Gunsan port. According to the research on the actual condition, the biggest problem in Gunsan port is the depth of water. The management, relation system, infrastructure and information system of Gunsan port are also insufficient. Therefore, this paper will make an alternative plan to improve these problems and help the container cargos induce to Gunsan port.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.100-108
• /
• 2000

As U.S. congress and I.M.O. have recently adopted strengthened MARPOL73/78 regulations on marine pollution, it is necessary to develope a new type of tankers such as Double hull tanker(D/H Tanker) and Mid-deck tanker(M/D Tanker) and so on. Because most of researches are concentrated on the volume of oil spill due to collision of ships, in this paper, a structural design program for D/H Tankers and M/D Tankers is developed to suggest the effective type of tankers by comparing structural characteristics between their types. By this program, minimum hull weight designs of D/H tankers and M/D tankers considering tank arrangement are performed and the design results are compared each other. The efficient types of hull structure for the minimum weight design between D/H tankers and M/D tankers is proposed.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.143-149
• /
• 2004

Recently, RFID technology play a key role to implement ubiquitous sensor network(USN). In this paper, we introduce trends of RFID technology, standardization, and then its applications. The purpose of this work is to suggest prosperous applications of RFID, which is applicable on marine information system, such as ship inventory management, management of container and its contents, sensing of environments within cargo hold, management of fishery boats. In case that RFID technology is utilized on marine information systems, it makes safety at sea and marine environments protection.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.83-92
• /
• 1993

This paper describes structural safety assessment techniques against crygenic temperature to design MRV type B LNG tank system. The following items are detail with in detail. (1) Leakage estimation of LNG through the propagating clacks at tank plate was performed and design of the range of catch basin(2ndary barrier) was followed to ensure the safety of ship structures against leaked LNG. (2) Temperature distribution analysis for cargo hold and skirt system was carried out using the steady state heat transfer analysis model for spherical LNG tank system. (3) Thermal stress distribution of skirt and tank system was calculated, where very stiff thermal variation was shwn through item(2) analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.361-367
• /
• 2017

A membrane type LNG cargo tank is equipped with a pump tower and a liquid dome for loading and unloading of LNG. However, the membrane running continuously on the tank wall to prevent leakage of LNG is interrupted by the liquid dome, hence care should be taken in the design of liquid dome and its substructures. In case of GTT NO96 membrane type cargo containment system, chair structure is arranged along the periphery of the liquid dome targeting to support the membrane which is exposed to the both hull girder and thermal load. This paper proposes a new and simple chair structure, which outperforms traditional design from productivity point of view maintaining same level of structural safety. Strength assessment on the new design was performed to guarantee the structural safety of the new design, which includes strength, fatigue and crack propagation analysis.

• Journal of the military operations research society of Korea
• /
• v.35 no.3
• /
• pp.1-15
• /
• 2009

Central supply depot of Air Force has been receiving and storing the goods from the inside and outside of the country. And it also has been distributing the goods to the air base by air, rail, road, etc. These goods have been called central goods. Among these central goods, 10% of them are transported by air and the amount of freight is increasing day by day. So, air transportation in the Air Force has been more important than ever. But, studies of demand estimation for activating air transportation are very difficient. This study verified the main factors affecting to air transportation and the function of regression model will be useful data for estimating air freight demand.