• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.215-223
• /
• 1999

Evaporation heat transfer coefficient and pressure loss were measured for three different micro-fin tubes and a smooth tube. The experiments were carried out with R-22 over a wide range of vapor Quality, mass velocity and heat flux. Heat transfer coefficient of the tube with slightly modified fin shape was found to be higher than that of the commercial reference tube by 60%. The improvement of heat transfer has been achieved without noticeable increase of pressure loss. Heat transfer coefficient was increased with increasing quality, refrigerant mass flux, and heat flux. However, the effect of refrigerant mass flux and heat flux was not great. Heat transfer coefficient at bottom was lower than that at top of the tube in low quality region, which suggested the existence of stratification in the micro-fin tube. Pressure drop was linearly increased with increasing refrigerant quality and was proportional to about square of mass flux.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.57-58
• /
• 1992

분리막을 이용한 물질의 분리는 최근 들어 많은 연구가 수행되어 일부 실용화 되고 있으나, 최근에 관심을 끌고 있는 Pervaporation 분리법에 의한 유기물의 분리는 여러가지 이유에서 아직 큰 성과를 올리지 못하고 있다고 생각된다. 그러나, 이 방법만이 갖는 잇점 때문에 국내.외에서 다방면으로 활발히 연구가 진행되고 있다. 한편 Pervaporation 분리법의 분리기구를 규명하는데는 많은 어려움이 있으므로 아직까지 명확히 밝혀지지 않고 있으나 언제인가는 밝혀져야 할 과제라고 생각된다. 따라서 본 연구에서는 투과현상을 좀 더 구체적으로 파악하므로써 분리기구를 해석하는 데 다소나마 기여하기 위하여 물 선택성 막은 Carboxy-methylcellulose(CMC) 막을 제작하여 알코올류, DMF, DMAc, Dioxane등의 유기 수용액의 분리실험을 하였으며, 투과 증기의 조성을 짧은 시간 간격으로 측정하므로써 분리특성과 아울러 투과현상을 파악하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.84-86
• /
• 2001

본 논문에서는 고성능 활성탄의 악취 및 유해가스 흡착효율과 멜트브로운(M/B)부직포의 여과성능에 의한 복합적인 고기능 방진특성을 갖는 활성탄 부착 M/B 국산화 여과재를 제조개발하였다. 고성능 활성탄은 고순도의 일반활성탄에 금속염, 유기물 등을 담지시켜 활성화시킨 활성탄이고, M/B여과재의 웹(web)제조조건은 M/B 방사기에서 방사온도 250℃, 방사속도 150m/sec, 고온공기온도 250℃ 그리고 DCD(die to collector distance) 20cm가 적합함을 알 수 있었다. 또한 M/B 여과재에 활성탄 부착은 열롤러시스템에 의한 열적결합방법을 이용하여 균일한 분포의 점접착결합구조를 갖도록 하였고, 개발된 복합기능 여과재가 방진마스크용 여과재로의 이용이 가능하다는 것을 분진포집효율, 투과율, 흡기저항 등 여과재 성능기준실험 결과를 통해 확인하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.280-282
• /
• 2006

활성탄 등의 흡착제를 필터 표면에 담지하므로써 흡착능을 지니고 있는 필터를 제조하고, 이때 흡착제 담지 필터의 흡착효율과 흡착능을 VOC, 황 및 질소화합물에 대하여 고찰 하였다. 담지법에 따른 흡착능의 변화를 연구하여 최적의 흡착제 담지법을 도출하고자 흡착물질, 담지량, 온도, 농도에 따른 흡착능의변화를 연구하였다. 또한 활성탄의 전처리에 따른 흡착능의 향상을 연구하여 활성탄 담지필터에 대한 흡착 및 재생 성능 파악하고자 하였다.

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.233-241
• /
• 2004

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve both full density and grain refinement of Al-20 wt% Si powders without grain growth, which was considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (Equal channel angular pressing), one of the most promising method in SPD, was used for the powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 passes was conducted for 10$0^{\circ}C$ and 20$0^{\circ}C$ It was found by microhardness, compression tests and micro-structure characterization that high mechanical strength could be achieved effectively as a result of the well bonded powder contact surface during ECAP process. The SPD processing of powders is a viable method to achieve both fully density and nanostructured materials.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.232-239
• /
• 2013

In this study, 25gsm melt-blown polypropylene nonwoven for dust-proof/medical masks was finished by the corona discharging treatment. The influence of corona discharging parameters on the filtration efficiency was investigated. Several parameters such as discharging voltage, discharging speed, distance to discharging wire and configuration of discharging system had an effect on filtration efficiency, while the parameters had no effect on breathing resistance. Optimum corona discharging conditions are as follows: Wires were installed on the upper part of the nonwoven and paper pipe was installed on the lower part of the nonwoven having a distance of 5cm. The sequence of wire voltages was +60 kV, +60 kV, 0, -60 kV, and -60 kV. The discharging voltage and speed were 60 kV and 30m/min respectively. The nonwoven treated by corona discharging at the optimum condition showed a filtration efficiency of 80% or more, which is suitable for dust-proof/medical masks.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.31-33
• /
• 2002

변전기기뿐만아니라 모든 제품에 대해서 신뢰성의 증대가 요구되는 요즈음 당사에서는 에폭시절연물의 연구에 가일층 박차를 가하고있으며, 금번시험을 통하여 에폭시절연물의 성능검증방법이 향상되었음을 알게되었고 설계적인 측면에서 보완되어야할 사항이 무엇인가를 확인 할수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1253-1255
• /
• 2022

예능 프로그램에서 관찰예능 포맷은 널리 사용되는 형태이다. 본 연구에서는 AI기반 리프레이밍 기술을 활용하는 새로운 관찰 예능 제작 기법을 제안한다. 제안방식은 실제 방송프로그램 KBS2 신상출시 편스토랑에 적용되었다. 연구의 조건에 부합하는 촬영 장비의 기능조건과 조사결과를 다룬다. 센서타입와 연속녹화시간은 장비선정에 있어 핵심 고려요소로 나타났다. 시스템 구성은 제작 워크플로우에 따라 촬영파트와 편집파트로 나누어 소개한다. 촬영파트는 실제 제작현장의 기록을 바탕으로 작성되었다. 편집파트의 경우 자체 개발한 편집도구로 이루어지며, 핵심모듈인 AI엔진과 고속렌더링모듈에 대한 소개를 하였다. 향후 최신 촬영 장비의 도입, 처리성능의 향상 등을 통해 제안방식의 적용처를 넓혀갈 수 있을 것으로 기대한다.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.18-25
• /
• 2008

The functional non-woven fabrics have been applied in various industry fields, such as clothing, hygiene, environment, medical and so forth. The functional non-woven fabrics were manufactured by meltblown and finishing processes. These functional non-woven fabrics were based on 5wt% masterbatch using 2,000ppm nano-silver resin composite. Silver is one of the most universal antimicrobial substances. Nano-technology enables us to expand the surface area of silver particles markedly. Silver nano particles were successfully produced less than 50nm in size. The functional non-woven fabrics including nano-silver particles showed excellent antibacterial activities against Staphylococcus aureus (ATCC 6538) and Klebsieila pneumoniae (ATCC 4352). From the results, functional non-woven fabrics including silver nano particels probably will be available as a good and safe antibiotic alternative, such as mask medium filter, water purifier filter, hygiene wet tissues, marine products pad and so forth.