• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.5-14
• /
• 1998

In refuse landfill, long-term settlement is considerably dependent upon the biological decomposition of refuse which is distinguished from typical soil behavior. Two equations are combined in order to model long-term settlement behavior of refuse landfill caused by mechanical secondary compression and secondary compression caused by the decomposition of biolegradable refuse. It is suggested that mechanical secondary compression is linear with respcet to the logarithm of time. In order to estimate the settlement that occurs due. to the decomposition of biodegradable refuse, a mathematical model is used which theoretically conoiders the decomposition process related to the solubilization stage of biodegradable refuse solid. This model is based on hydrolysis process and expressed as first order kinetics. The proposed model is applied to Lysimeter compression data of an old refuse. This paper intends to propose the simplest mathematical model which effectively represents settlement caused by the solubilization stage of biodegradable refuse solid on decomposition process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.499-502
• /
• 2017

The needs of efficient electricity use and current measurement for electrical safety have been increased. Hence, the current sensor is used, especially non-contact current sensor which can measure the current without blocking the circuit using hall effect. However, the accurate measuring of the current sensor is inhibited due to the inflow of various noises in this current sensor. In this article, a stronger current sensor against the noise is proposed using low pass FIR filter to the existing current sensor. FIR filter was designed to block the range over the certain frequency at the output of the current sensor to eliminate the external noises, and so on. As a result, more accurate and close measurements were possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.762-771
• /
• 2012

In this paper, we propose an adaptive power control scheme employing a self-optimization concept in femtocell systems, in order to improve system capacity, thereby reducing call-drop probability. In the proposed scheme, each femto base station(FBS) controls individual channel's transmission power base on two parameters; the neighboring cell's transmission power for each individual channel which is delivered from a femto-gateway and the received power strength from neighboring cells which is periodically measured by means of a spectrum sensing. Adaptive adjustment of individual channel's transmission power in accordance with femto mobile station(FMS) mobility features can also reduce undesirable handovers and evenly distribute traffic load over all femtocells. In addition, the manipulative control of channel's transmission power is able to keep the system coverage and the call-drop probability within an acceptable range, regardless of density of femtocells. Computer simulation shows that the proposed scheme outperforms existing schemes in terms of the system coverage and the call-drop probability.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2020

With the deployment of 5G infrastructure, content delivery network (CDN) will be a key role to provide explosive growing services for the independent media and YouTube which contain high-speed mobile contents. Without a local cache, the mobile backhaul and fronthaul should endure huge burden of bandwidth request for users as the increase number of direct accesses from contents providers. To deal with this issue, this paper fist presents both fronthaul solutions for CDN that use dark fibers and a passive optical network (PON). On top of that, we propose the aggregated content request specialized for PON caching and evaluate and compare its performance to legacy schemes through the simulation. The proposed PON caching scheme can reduce average access time of up to 0.5 seconds, 1/n received request packets, and save 60% of backhaul bandwidth compared to the no caching scheme. This work can be a useful reference for service providers and will be extended to further improve the hit ratio of cache in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.65-75
• /
• 2009

In Wireless Sensor Network, the sensor node localization is important issue for information tracking, event detection, routing. Generally, in wireless sensor network localization, the absolute positions of certain anchor nodes are required based on the use of global positioning system, then all the other nodes are approximately localized using various algorithms based on a coordinate system of anchor DV-Hop is a localized, distributed, hop by hop positioning algorithm in wireless sensor network where only a limited fraction of nodes have self positioning capability. However, instead of uniformly distributed network, in anisotropic network with possible holes, DV-Hop's performance is very low. To address this issue, we propose Group based DV-Hop (GDV-Hop) algorithm. Best contribution of GDV-Hop is that it performs localization with reduced error compared with DV-Hop in anisotropic network.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.786-795
• /
• 2010

In this paper, we propose a new EBG structure that the two unit cells are connected by the bridge line in signal transmission plane. The SSN of the power plane is reduced effectively by via holes and bridge lines connecting the unit cells. The superior signal transfer characteristic is shown between the signal lines in the signal transmission plane. The proposed EBG structure contains 1.2 GHz cut-off frequency and less than －30 dB suppression in the 8.3 GHz broad bandwidth. In addition, To improve the SI(Signal Integrity) in signal transmission plane keeping the same bandstop frequency range, the optimized location of the reference plane is proposed.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.222-228
• /
• 2005

Undoped GaN epitaxial layer was grown on c-plane sapphire substrate by a two-step growth with metalorganic chemical vapor deposition(MOCVD). We have investigated the effects of the variation of final growth temperature on surface morphology, roughness, crystal quality, optical property, and electrical property In a horizontal MOCVD reactor, the film was grown at 300 Tow low-pressure with a fixed nucleation temperature of $500^{\circ}C$, varing the final growth temperature from $850\~1050^{\circ}C$ . The undoped GaN epilayers were characterized by atomic force microscopy, high-resolution x-ray diffractometer, photoluminescence, and Hall effect measurement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.133-133
• /
• 2010

3-5족 화합물 반도체를 이용한 집광형 삼중 접합 태양전지는 35% 이상의 광변환 효율로 주목을 받고 있다. 일반적으로 삼중 접합 태양전지는 넓은 영역대의 파장을 흡수하기 위해 밴드갭이 다른 InGaP, GaAs, Ge이 사용된다. 그 중 하부셀은 기계적 강도가 높고 장파장을 흡수할 수 있는 Ge이 사용되는데, p-type Ge 기판위에 III-V 결정막 성장 시 5족 원소가 확산되어 pn접합을 형성하게 된다. 이러한 구조를 가진 Ge 하부셀이 효율적으로 홀-전자 쌍을 형성하기 위해서는 두꺼운 베이스와 얇은 에미터 접합이 필요하다. InGaP의 phosphorus는 낮은 확산계수로 인해 GaAs의 arsenic에 비해 얇은 접합이 형성 가능하며, Ge표면 에칭효과가 더 적다는 장점이 있다. 이를 고려해 우리 연구그룹에서는 metalorganic chemical vapor depostion(MOCVD)을 이용하여 Ge기판위에 성장한 InGaP layer의 특성을 관찰해 보았다. <111>로 $6^{\circ}$ 기울어진 p-type Ge(100) 기판위에 MOCVD를 통해 InGaP layer를 형성하였고, 성장된 layer를 atomic force microscope(AFM)와 high-resolution x-ray diffraction(HRXRD)을 이용하여 표면형상, 조성, 응력상태 등을 각각 관찰하였다. 또한 phosphorus 확산에 의해 형성되는 도핑농도는 electrochemical capacitance-voltage(ECV)을 이용하여 관찰하였다. 성장된 Ge기판위의 InGaP layer의 경우 특징적으로 높이 50 nm, 밑변 길이 $1\;{\mu}m$의 경사진 표면을 관찰할 수 있었으며, 이러한 구조는 TMIn과 TMGa의 비율이 증가 할수록 감소하였다. 따라서 이러한 경사진 형태의 구조는 격자 불일치 때문인 것으로 판단된다. 추가적으로 V/III ratio의 최적화를 통해 1.3 nm의 표면 거칠기를 갖는 InGaP layer를 얻을 수 있었다. ECV를 통해 Ge 하부셀의 pn접합 형성을 관찰한 결과 약 160 nm에서 접합이 형성되는 것을 관찰할 수 있었다. 또한, 같은 성장 조건의 샘플을 1000 초 열처리 후에 접합깊이의 변화를 관찰한 결과 180 nm에서 접합이 관찰되었지만, GaAs의 arsenic에 의한 pn접합은 열처리 후에 그 깊이가 170 nm에서 300 nm로 증가 하였다. 따라서 삼중접합 태양전지의 제작 공정을 고려할 경우 phosphorus에 의한 접합 형성이 Ge 하부셀의 동작 특성에 유리할 것으로 판단된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.347-354
• /
• 2021

In the equipment industry such as chemical plants, high temperature, high pressure, and toxic fluids move between various facilities through piping. The movement and damage of pipes due to changes in the surrounding environment such as temperature changes, vibrations, earthquakes, and ground subsidence often lead to major accidents involving personal injury. In order to prevent such an accident, various types of expansion joints are used to absorb and supplement various shocks applied to the pipe to prevent accidents in advance. Therefore, it is very important to measure the deformation of the used expansion joint and predict its lifespan to prevent a major accident. In this paper, the deformation of the expansion joint was understood as a kind of motion, and the change was measured using a Hall Effect Sensor and a 9-Axis Sensor. In addition, we studied a system that can predict the deformation of expansion joints by collecting and analyzing the measured data using a general-purpose microcomputer (Arduino Board) and C language.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.81-89
• /
• 2019

In this study, wind tunnel test on Quad-Tilt Propeller which has tandem wings is carried out to analyze the aerodynamic interference effect of front wing and propeller on rear wing during forward flight. Using 6-axis balance system, forces and moments of whole aircraft were measured and using strain gauge at wing root, bending moments were measured to observe change of aerodynamic force of each wings. A 12-hole probe was used to measure the flow field in the wing and propeller wake. Flow characteristics were observed qualitatively through flow visualization experiment using tuft and smoke. To measure the aerodynamic interference by elements, the influence of front wing and propeller on rear wing was analyzed by changing the wings and propellers mount combination.