• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.91-98
• /
• 2024

In this paper, we present a particle-grid blending framework based on a geometric approach to efficiently represent opaque ice spheres with air bubbles. The water temperature is diffused through the grid and the air bubbles represented inside the ice through the particles. To solve the problem of previous methods that generate noisy dissolved air fields, we use levelsets to lighten the algorithm, i.e., the number of active particles and the initial amount of dissolved oxygen can be used to efficiently control the termination conditions of heat diffusion. We also extend the previous dissolved air field method, which only computes near air bubbles, to transparent regions to represent realistic ice spheres, and introduce a levelset-based approach to accurately compute the orientation of particles. As a result, the method presented in this paper is about three times faster than the existing methods and shows visually improved visualization of opaque ice spheres, which can be used in the field of representing physical virtual ice forms.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.49-54
• /
• 2013

In this study, I was focusing on LED (Light Emitting Diode) light effect in growth of chrysanthemum. For this reason, I formed six monochromatic lights (red 650 nm, 647 nm, 622 nm, blue 463 nm, 450 nm, white), six mixed lights sources red : blue (9 : 1, 8 : 2, 7 : 3, 6 : 4, 5 : 5) and 3 control beds in light sources ratio between rad : blue (8 : 2) including sun light. It was totally 15 control beds. Depending on light investigation time in growth, 6/6 (on/off) was highest in the length of plant, the number of leaves, the fresh dry and leaf area. But statistical significance wasn't accepted in general. In case of monochromatic lights, length of plant and leaf area is biggest in the Blue 450 mm and the length of root is highest in RED 650 mm. Except for this 3 measuring points (length of plant, the number of leaves and fresh weight), sun light and white was highest. Besides there are monochromatic light effect but various wavelength range in light sources are needed to crop growth. In terms of mixed light resources, except for sun light, It turned out the length of plant is highest in the highest red light rate red : blue (9 : 1), and Red : white (7 : 3) is highest in fresh weight and dry weight. The sun light is the highest one in the leaf area. The results from LED light effect in growth of chrysanthemum are obviously effect on growth and building up the shape. We need to choose suitable light sources in the monochromatic lights and mixed lights for growing high quality of chrysanthemum or Supplemental Lighting.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.196-205
• /
• 2008

Variability in vertical ozone and meteorological profiles was measured by 2Z electrochemical concentration cells (ECC) ozonesonde at Bangyi in Seoul ($37.52^{\circ}N$, $127.13^{\circ}E$) during June $6{\sim}9$, 2003 in odor to identify the vertical distribution of ozone and its relationship with the lower-atmospheric structure resulted in the high ozone concentrations near the surface. The eight profiles obtained in the early morning and the late afternoon during the study period clearly showed that the substantial change of ozone concentrations in lower atmosphere(${\sim}5\;km$), indicating that it is tightly coupled to the variation of the planetary boundary layer (PBL) structure as well as the background synoptic flow. All profiles observed early in the morning showed very low ozone concentrations near the surface with strong vertical gradients in the nocturnal stable boundary layer due to the photochemical ozone loss caused by surface NO titration under very weak vertical mixing. On the other hand, relatively uniform ozone profiles in the developed mixing layer and the ozone peaks in the upper PBL, were observed in the late afternoon. It was noted that a significant increase in ozone concentrations in the lower atmosphere occurred with the corresponding decrease of the mixing height in the late afternoon on June 8. Ozone in upper layer did not vertically vary much compared to that in PBL but changed significantly on June 6 that was closely associated with the variation of synoptic flows. Interestingly, heavily polluted ozone layers aloft (a maximum value of 115 ppb around 2 km) were formed early in the morning on 6 through 7 June under dominant westerly synoptic flows. This indicates the effects of the transport of pollutants on regional scale and consequently can give a rise to increase the surface ozone concentration by downward mixing processes enhanced in the afternoon.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.1-10
• /
• 2020

Reactivity controlled compression ignition (RCCI) combustion is one of dual-fuel combustion systems which can be constructed by early diesel injection during the compression stroke to improve premixing between diesel and air. As a result, RCCI combustion promises low nitrogen oxides (NOx) and smoke emissions comparing to those of general dual-fuel combustion. For this combustion system, to meet the intensified emission regulations without emission after-treatment systems, exhaust gas recirculation (EGR) is necessary to reduce combustion temperature with lean premixed mixture condition. However, since EGR is supplied from the front of turbocharger system, intake pressure and the amount of fresh air supplementation are decreased as increasing EGR rate. For this reason, the effect of various EGR rates on the brake power and thermal efficiency of natural gas/diesel RCCI combustion under two different operating conditions in a 6 L compression ignition engine. Varying EGR rate would influence on the combustion characteristic and boosting condition simultaneously. For the 1,200/29 kW and 1,800 rpm/(lower than) 90 kW conditions, NOx and smoke emissions were controlled lower than the emission regulation of 'Tier-4 final' and the maximum in-cylinder pressure was 160 bar for the indurance of engine system. The results showed that under 1,200 rpm/29 kW condition, there were no changes in brake power and thermal efficiency. On the other hand, under 1,800 rpm condition, brake power and thermal efficieny were decreased from 90 to 65 kW and from 37 to 33 % respectively, because of deceasing intake pressure (from 2.3 to 1.8 bar). Therefore, it is better to supply EGR from the rear of compressor, i.e. low pressure EGR (LP-EGR) system, comparing to high pressure EGR (HP-EGR) for the improvement of RCCI power and thermal efficiency.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.180-187
• /
• 2022

In order to select suitable light in a plant factory, electric energy use efficiency and light use efficiency should be considered simultaneously to consider operating costs as well as quantitative and functional aspects. The growth characteristics, electric energy use efficiency, light use efficiency by light intensity, LED ratio, and photoperiod conditions were compared together. Light intensity is 60, 130, 230, and 320 µmol·m^-2·s^-1 treatments, and light quality is the mixing ratio of red light and blue light 8:2, 6:4, 4:6, and 2:8 treatments. Photoperiod is 9, 12, 15, and 18 hours treatments based on the daytime. In the light intensity experiment, the growth rate increased as the light intensity increased, but there was no significant difference in the light use efficiency. When comparing the leaf fresh weight per power consumption, only the 320 µmol·m^-2·s^-1 treatment group showed significantly low efficiency, and there was no significant difference in the other treatments, so 230 µmol·m^-2·s^-1, which produced the most, was the most efficient. In the light quality experiment, the ratio of red light and blue light was measured to be high at the same time as the growth rate and light use efficiency in RB 8:2, and there was no significant difference in color difference and flavonoids content, so a Red:Blue ratio of 8:2 was the most suitable condition. In the photoperiod experiment, the longer the photoperiod, the higher the growth rate. However, there was no significant difference in the growth rate over 12 hours of daytime, so 12 hours considering the light consumption efficiency was a suitable condition. Based on the above results, LED light environmental conditions for perilla growth in plant factories were light intensity, light quality, and day length of 230 µmol·m^-2·s^-1 or more, 8:2, and 12 hours or more, respectively.

• Radiation Oncology Journal
• /
• v.14 no.3
• /
• pp.221-228
• /
• 1996

Purpose : We tried to evaluate the clinical characteristics, the treatment methods, the results of treatments, and the Patterns of failure in ovarian dysgerminoma retrospectively According to the results we would like to suggest the proper management guideline of stage la ovarian dysgerminoma patients who want to maintain fertility. Materials and Methods : Between 1975 and 1990, 34 patients with ovarian dysgerminoma were treated at the Yonsei University Hospital. The case records of these patients have been reviewed for presenting symptoms, treatment methods, local control and survival following treatment. Excluded from analysis were five patients with mixed ovarian germ cell tumors and gonadoblastomas (46,XY) Treatment results of the twenty nine patients were analysed by each treatment modality. Twenty one patients were treated with surgery and postoperative adjuvant radiotherapy (group 2). The other eight patients were treated with operation alone (group 2). The median age of twenty-nine patients was 23 years with a range of 8 to 39 years. Presenting symptoms were abdominal mass (20) pelvic discomfort or pain (5) et al. Radiotherapy was performed by 10MV LINAC or Co-60 teletherapy unit. The total radiation dose of the whole abdomen was 20-25 Gy/3weeks, 1-1.5 Gy/fraction with a boost to the whole pelvis 10-15 Gy/l-2weeks 1.8-2.0 Gy/fraction. Advanced stage disease (stage II or stage III) patients received prophylactic mediastinal and supraclavicular irradiation to a dose of 16-26 Gy. Median duration of follow-up of living patients was 80 months (range 13-201 months). Results : All of the twenty one patients of group 1 were alive without disease ($100\%$). Among the eight patients who were not treated with radiotherapy (group 2), six patients developed local recurrence. Four Patients referred with recurrent disease were treated with salvage radiotherapy. Three of four patients were salvaged and one Patient who had recurrent intra-abdominal disease died of progressed carcinomatosis at 11 months after salvage radiotherapy. The other two patients with recurrence were salvaged with chemotherapy (1 patient) or re-operation (1 Patient). Twenty eight patients remained alive without disease at last follow up, so the 5 year local control rate and 5 year overall survival rate for all groups were $96.6\%$ (28/29), respectively. Among thirteen patients with stage la unilateral tumors seven patients were treated with postoperative radiotherapy and the other six patients were treated with unilateral salpingo-oophorectomy alone. Five patients who did not received radiotherapy developed local failure but all of the recurrent ovarian dysgerminomas were salvaged with radiotherapy, chemotherapy or re-operation. So all the 13 patients with stage la ovarian dysgerminoma were free of disease from 20-201 months (median 80 months). Conclusion : The authors consider external irradiation to be an effective treatment as a complement to surgery in ovarian dysgerminoma. For those patients with disease presenting in stage la tumors who wish to maintain fertility, unilateral salpingo-oophorectomy alone may be curative and spare ovarian function considering excellent salvage rate of recurrent ovarian dysgerminoma in present study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1225-1233
• /
• 2017

The aim of this study was to evaluate the microbial inhibitory activity and physicochemical quality of fresh carrot juice prepared with different environmentally-friendly washing methods during low temperature storage. Individual and combined treatments with sodium bicarbonate (baking soda, $NaHCO_3$) and citric acid were applied to carrots for 10 min. Tap water and 50 ppm of sodium hypochlorite (NaOCl) were used as the control. Combined treatment of 1% $NaHCO_3$ and 1% citric acid significantly reduced total aerobic counts and coliforms. In addition, combined treatment of 1% $NaHCO_3$ and 1% citric acid inhibited microbial growth for 7 days at $4^{\circ}C$ and $10^{\circ}C$ in a shelf-life study. There were no significant differences among the sanitizers in terms of $^{\circ}Brix$, acidity, pH, and color. Changes in physicochemical quality were not significantly different by sanitizer but were affected by storage temperature. These results indicate that washing with combined treatment of 1% $NaHCO_3$ and 1% citric acid is an effective method to inhibit the microbial population and maintain physicochemical quality. Therefore, combined treatment of 1% $NaHCO_3$ and 1% citric acid can be effectively used to sanitize and prepare carrot juice without affecting other properties.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.189-193
• /
• 2009

The purpose of this study was to investigate the antimicrobial activities of natural antimicrobials (10 formulas, $F1{\sim}F10$) against yeasts in functional beverages. The growth rates of yeasts were different with the ten different natural antimicrobial formulas tested. Yeasts grew for 14 days and the antimicrobial effect was observed between 14 and 18 days. Levels of S. cerevisiae, Z. bailii, and P. membranaefaciens were reduced to the limit of detection (ND) < 10 CFU/mL) after 28 days. Resistance against the antimicrobial effect was greatest for P. membranaefaciens, which grew to a level of $0.12{\sim}1.48\;\log_{10}\;CFU$/mL after 14 days and was reduced to a level of $1.61{\sim}3.55\;\log_{10}\;CFU$/mL after 28 days. The resistance of C. albicans was also high with a growth level of $0.13{\sim}1.28\;\log_{10}\;CFU$/mL after 14 days and reduction to $1.51{\sim}5.30\;\log_{10}\;CFU$/mL after 28 days. The antimicrobial effect of F10 was strongest for P. membranaefaciens. Every treatment reduced the microbial levels to $2.68{\sim}5.62\;\log_{10}\;CFU$/mL after 6 months. F2, F4, F5, F6, and F10 reduced the C. albicans level to ND after 28 days while F1, F3, F8, and F9 reduced yeasts to the ND level after 6 months. The antimicrobial activities observed here will be useful for development of natural antimicrobials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.57-63
• /
• 1984

This study was designed to compare the quality characteristics of freeze and spray dried red ginseng extract powders(RGEPs) by drying methods, which have been required to maintain the stability for the quality. Chemical compositions, major ginsenoside contents and color intensities of these Products were compared by drying conditions. The moisture absorption rates and optical densities also were compared during storage under maltreatment conditions of a various relative humidities (75, 86and 92 RH) and two different temperatures (37 and $50^{\circ}C$). It was found that decreases of total major ginsenosides contents in freeze and spray dried RGEPs were 5.4 % to 6.7 % during storage for 6 months at $37^{\circ}C$, 75 % RH. When these products packaged with inner seal of Al-foil laminate paper (Al-foil; 9 ${\mu}m$) were stored for 6 months at $37^{\circ}C$, 75 % RH. the moisture absorption rates of freeze and spray dried RGEPs were ranged 42 % to 82 %, 8 % to 16 %, respectively. In storage for 6 months at $37^{\circ}C$, 86 % RH, spray dried RGEP was higher in brown pigment($400{\sim}490nm$) than freeze dried RGEP while freeze dried was higher in pyrazine (278 nm), HMF and furfural (285 nm) than spray dried RGEP. It was found that RGEPs showed a strong anti-oxidative activity by electron donating ability to DPPPH, but there was no significant difference between freeze and spray dried RGEPs.