• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.231-237
• /
• 2020

In this paper, we provide an efficient hybrid video blending scheme to improve the naturalness of composite video in Poisson equation-based composite methods. In image blending process, various blending methods are used depending on the purpose of image composition. The hybrid blending method proposed in this paper has the characteristics that there is no seam in the composite video and the color distortion of the object is reduced by properly utilizing the advantages of Poisson blending and alpha blending. First, after blending the source object by the Poisson blending method, the color difference between the blended object and the original object is compared. If the color difference is equal to or greater than the threshold value, the object of source video is alpha blended and is added together with the Poisson blended object. Simulation results show that the proposed method has not only better naturalness than Poisson blending and alpha blending, but also requires a relatively small amount of computation.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.547-553
• /
• 2016

This study was conducted to look at the antimicrobial synergistic effect of blended oil into the target skin flora. The essential oils used in antimicrobial test were 100% eucalyptus (EU), lemon (LE), lavender (LA) and four blended oils, EU+LE, LE+LA, EU+LA, and, EU+LE+LA in ratio of 1:1 and 1:1:1 respectively. As a result, LE showed the highest, LA showed the lowest antimicrobial activity among single oil group. In blended oil group, antimicrobial activity of the EU + LA showed significantly increasing effect than the sum of the antimicrobial activity of the single oil. However, the antimicrobial effects of the blend of three oils did not show any synergistic effect. This result showed that the interaction between the chemical components constituting the oil than the number of blended oil seems more significant on the synergistic effect. Therefore, blending essential oil based on scientific evidence becomes more necessary in the future.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.262-263
• /
• 2012

다중 센서의 영상, 예를 들어 가시광 영상과 적외선 영상은 서로 다른 특징을 가지고 있기 때문에 본 논문에서는 IR 영상의 특징을 보존한 새로운 혼합기법을 제안하다. 이러한 혼합기법은 의료 영상, 보안 영상 등에서 매우 중요하고 다양하게 다루어진다. 일반적인 혼합기법을 사용하게 되면 영상간의 특색 때문에 혼합 시 조화롭지 못하는 문제점을 가진다. 이러한 문제점을 해결하기 위해서 본 논문에서는 중요도 맵을 추출하고 그 영역에 대하여 포아송 블랜딩을 통해 두 개의 다른 특징을 가시광 영상을 혼합한다. 제안한 알고리즘은 기존의 연구와 다르게 혼합할 영역을 수동으로 지정하는 것이 아니라 자동적으로 추출하고, 가시광 영상에 IR 영상에서만 검출되는 영역을 결합한 새로운 결과를 얻을 수 있었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.235-243
• /
• 2016

In the near future, many countries, including the Republic of Korea, will face a significant increase in low level radioactive waste (LLW) from nuclear power plant decommissioning. The purpose of this paper is to look at blending as a method for enhancing disposal options for low-level radioactive waste from the decommissioning of nuclear reactors. The 2007 U.S. Nuclear Regulatory Commission strategic assessment of the status of the U.S. LLW program identified the need to move to a risk-informed and performance-based regulatory approach for managing LLW. The strategic assessment identified blending waste of varying radionuclide concentrations as a potential means of enhancing options for LLW disposal. The NRC's position is that concentration averaging or blending can be performed in a way that does not diminish the overall safety of LLW disposal. The revised regulatory requirements for blending LLW are presented in the revised NRC Branch Technical Position for Concentration Averaging and Encapsulation (CA BTP 2015). The changes to the CA BTP that are the most significant for NPP operation, maintenance and decommissioning are reviewed in this paper and a potential application is identified for decommissioning waste in Korea. By far the largest volume of LLW from NPPs will come from decommissioning rather than operation. The large volumes in decommissioning present an opportunity for significant gains in disposal efficiency from blending and concentration averaging. The application of concentration averaging waste from a reactor bio-shield is also presented.

• Clean Technology
• /
• v.30 no.1
• /
• pp.13-22
• /
• 2024

In this study, blended 6,13-Bis(triisopropylsilylethynyl)pentacene (TP):2-Decyl-7-phenyl[1]benzothieno[3,2-b][1] benzothiophene (BT):Poly styrene (PS) TFT at different ratios were explored for their potential application as light absorption sensors. Due to the mixing of BT, both off current reduction and on/off ratio improvement were achieved at the same time. In particular, the TP:BT:PS (1:0.25:1 w/w) sample showed excellent light absorption characteristics, which proved that it is possible to manufacture a high-performance light absorption device. Through analysis of the crystal structure and electrical properties of the various mixing ratios, it was confirmed that the TP:BT:PS (1:0.25:1 w/w) sample was optimal. The results of this study outline the expected effects of this innovation not only for the development of light absorption devices but also for the development of mixed organic semiconductor (OSC) optoelectronic systems. Through this study, the potential to create a multipurpose platform that overcomes the limitations of using a single OSC and the potential to fabricate a high-performance OSC TFT with a fine-tuned optical response were confirmed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.85-94
• /
• 2022

The mixed cropping system is a centuries-old cropping technique widely practiced in farmers' fields worldwide. Increased plant diversity enhances farmland biodiversity, which improves grain yield and quality. However, the effect of growing different rice cultivars simultaneously has rarely been investigated. In the present study, six glutinous rice cultivars were selected, and two mixture cultivation methods were determined according to plant height, grain yield, and color. Colored and glutinous rice are used for specific purposes by consumers because of their color and nutritive value. Six glutinous rice varieties, including aromatic and colored rice, were included in the combination interplanting trials. The results showed that, compared with the corresponding monocropping systems, almost all combinations of the mixed cropping systems had advantages in yield-related traits. Compared with monocropping systems, mixed cropping systems increased the number of panicles per plant and maturation rate by 20% and 10%, respectively. An increase of 18-20% grain yield was observed in mixed cropping plots compared with that in plots which grew only a single rice variety. Some rice varieties, such as green colored rice 'Nogwonchall' and black colored rice 'Chungpunghukhayangchall', exhibited 18-22% increased yield when they were planted in combinations. The high yields were primarily owing to improved light interception and reduced lodging, although other factors (for example, reduced severity of disease) may have also contributed.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.538-542
• /
• 2015

In this work, effects of the blend composition composed of 0, 10, 20, 30 and 40 wt% of nylon 6 to epoxy (diglycidylether of bisphenol-A, DGEBA) resin were investigated in terms of cure kinetics and thermal stability by differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). As the content of the nylon 6 increased, the maximum exothermic temperature ($T_{max}$) and the value of cure activation energy ($E_a$) decreased. The maximum exothermic temperature of the blending samples decreased with increasing in nylon 6 content, resulting in the decrease in curing activation energy of them due to the rapid curing reaction with epoxy resin in this system. From TGA analysis results of the DGEBA/nylon 6, the thermal stability based on the thermal stability index ($A^*{\cdot}K^*$) and integral procedure decomposition temperature (IPDT) increased with increase in the nylon 6 content. This was because of the combination of DGEBA and nylon 6 having good heat resistance, resulting in improving thermal stability of the DGEBA/nylon 6.