• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.514-520
• /
• 2019

The reduction in performance due to inbreeding (i.e. inbreeding depression) has long been documented in plant and animal populations. The population of Korean native pigs are small and this breed is valuable in Korea.. This study was aimed to investigate effects of inbreeding depression on total number of piglets born (TNB) and number of piglets born alive (NBA) in Korean native pigs. We used 2,806 pedigree and 303 sows's data with 483 phenotypic records. After estimating genetic parameters for each traits, inbreeding depression was estimated using a mixed model in which the inbreeding coefficient was included as a covariate. Korean native pigs had high heritability for each traits. Inbreeding coefficient constantly increased from 1998 to 2017~2018 but there is no reduction for each traits in 2017~2018 in compared with those in 1998. Significant inbreeding depression was detected for TNB (p=0.03) but not for NBA (p=0.41). In addition there are significantly positive interactions between inbreeding coefficient and breeding value for both traits (p<0.05). These results suggest that Korean native pigs are still having genetic variation for TNB and NBA, which could overcome reproductive risks from inbreeding coefficient increase.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.365-370
• /
• 2019

In this study, effects of the ultrasonic irradiation during the reaction process were investigated for the enantioselective kinetic resolution (EKR) reaction of racemic epoxides in the presence of chiral cobalt salen catalysts, as compared to that of using the conventional mechanical stirring. In order to compare catalytic activities, the chiral cobalt salen complexes having $AlCl_3-$, $BF_3-$ and nitrobenzenesulfonic acid (NBSA) were synthesized and used as catalysts, and then three kinds of the racemic epoxides such as ephichlorohydrine (ECH), epoxy phenoxypropane (EPP) and propylene oxide (PO) were used as reactants. In addition, EKR reactions have been performed using the water and methanol as nucleophiles, respectively. The unique contribution of ultrasonic irradiation as a powerful mixing medium was evaluated in this study to improve the kinetics in comparison to the conventional mechanical agitation during EKR reactions. The reaction time to obtain the highest 99 ee% became shorten more than that of above 60%, when the ultrasonic irradiation was used. This result may be interpreted by the cavitation effect of ultrasound in the solution, generating a powerful shear force for the very violent mixing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.71-76
• /
• 2019

Recently, the demand of labels for product management is increasing, as the automation system becomes more common. the development of functional labels which can be used in various environments has been rapidly proceeded. In the case of a printed circuit board, barcode labels with thermal and chemical stability are generally used due to a high temperature process around $300^{\circ}C$ and chemical cleaning in the manufacturing process. However, the yellowing phenomenon of labels that can lower the resolution of printed barcode image still needs to be prevented. In this study, we prepared a composite coating layer using a silica inorganic binder and a titanium dioxide white pigment, and developed a functional labels with thermal and chemical stability. The silica inorganic binder prepared by sol-gel process was confirmed to show excellent adhesion and abrasion resistance with the polyimide film. The white coating layer could be formed on the polyimide film with mixing the silica inorganic binder and titanium dioxide white pigment. The prepared coating layer showed excellent whiteness and glossiness above $400^{\circ}C$. The excellent chemical stability of the coating layer was also confirmed by the chemical treatment with acidic (pH 1.6) and basic (pH 13.6) cleaners.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.292-298
• /
• 2017

The aim of this study was to evaluate the effects of microencapsulation on the water absorption, DPPH radical scavenging activity (DRSA), hydroxyl radical scavenging activity (HRSA) and tyrosinase inhibition activity (TIA) in corn silk extracts. The lowest value (0.20) of water absorption index (WAI) and the highest value (95.23%) of water solubility index (WSI) were maltodextrin+cyclodextrin microencapulated corn silk extracts (MD+CD) and cyclodextrin encapulated corn silk extracts (CD), respectively. The 18.60% for DRSA value of control was increased to 89.25% for that of CD. The 16.89% for HRSA value of control was increased to 47.46%, and 7.16% for TIA value of control was increased to 39.35% for that of MD+CD, respectively. The MD+CD would be used for functional food and cosmetics materials as antioxidant and skin whitening agents. All investigated responses between control and treatment were statistically significant (p<0.05).

• Korean Journal of Culture and Social Issue
• /
• v.28 no.3
• /
• pp.513-527
• /
• 2022

This study was conducted to examining the socio-cultural impact of the COVID-19 pandemic that swept the world around 2020, and the transformation of norms and social problems due to COVID-19. For this, the characteristics of changes in the socio-cultural norms of the 14th century European Black Death, a representative example of the pandemic, were derived, and based on this, the COVID-19 pandemic was analyzed. The Black Death served as an opportunity to change social norms based on the existing religious authority and the power of the feudal system to the Enlightenment. The population declination and labor shortage also promoted commercialization and mechanization. Printing, which spread during this period, led to the popularization of knowledge, which raised the level of thinking and led to epochal scientific development. This became the foundation of the Industrial Revolution. Like the recent Black Death, COVID-19 has triggered changes in social norms. The technological environment of metaverse, a mixture of virtual and reality, has changed the norm of a consistent identity into free and open identities exerting various potentials through alternate characters. In addition, meme, which are about people being friendly to those with the same worldview as him on the metaverse, weakened the sense of isolation in non-face-to-face situations. Artificial intelligence (AI), which developed during the COVID-19 pandemic, has entered the stage of being used for creative activities beyond the function of assisting humans. Discussions were held on what new social problems would be created by the social norms changed due to the COVID-19 pandemic.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.163-171
• /
• 2022

Many studies on pervaporation (PV) for the separation of dilute alcohols as an alternative to conventional energy-intensive technique of distillation have been conducted earlier. The pervaporation transition behavior of ethanol-water mixtures through the PDMS/PSF membrane is important, in order to understand the mechanism of diffusion process. Therefore, in the present work, transient PV behavior for 50 wt% EtOH/H₂O mixture at 50℃ was investigated by using 1194 cm² PDMS/PSF hollow fiber membrane modules. The overall total flux and the separation factor of all the membrane modules increased initially and then gradually decreased with respect to PV time. The initial increase can be attributed to fact that membrane fibers were dry and it took time to dissolve into the membrane surface, but the subsequent decrease is due to the depletion of ethanol concentration in the feed. Therefore, it was confirmed that the ethanol permeation through a PDMS membrane is governed by the solution-diffusion mechanism.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.377-385
• /
• 2022

Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.201-216
• /
• 2022

Materials and techniques used for two portraits (Jo-nyeon Lee and S ung-in Lee) of the Lee family from Seongju enshrined in Seongsan temple were scientifically analyzed, and based on the data, an optimal replica restoration method was designed. According to the expression technique investigation, both portraits were expressed mainly in line drawing, but there were differences in shoes, pupils, the color expression of flesh, overpainting, and traces of reinforcement. Pigment analysis revealed that a mixture of cinnabar and minium, organic pigment, azurite, malachite, lead white, and yellow pigment were used in common. In the case of Sung-in Lee's portrait, seokganju and atacamite were also used. In addition, comparison with the contemporaneous portraits of gentry showed that the portrait style at the time was found in the two portraits, but the singularity was modified differently there. Based on the scientific analysis, it was decided to replicate the old color restoration for Jo-nyeon Lee's portrait while for Sung-in Lee's portrait, it was decided to replicate the phenomenon. Detailed coloring techniques were presented by supplementing the expression techniques that are difficult to confirm visually using scientific data. In addition, by measuring the chromaticity of representative positions in the portrait for each color and presenting the color reference value calculated as the average value, the current color of the artifact can be replicated and restored based on the objective data as much as possible.

• Nuclear Engineering and Technology
• /
• v.8 no.4
• /
• pp.231-242
• /
• 1976

The effects of temperature and pressure of leaching water on the leaching of radionuclides from bitumen-waste products were studied. The principal results are as follows: The fraction of $^{90}$ Sr and $^{137}$ Cs leached for periods of up to 120 days at 8atm was 2.1$\times$10$^{-6}$ ($\textrm{cm}^2$/g)$^{-1}$ , day$^{-1}$ and 6.02$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively and at 5$^{\circ}C$, 1.7$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ and 4.01$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively. These values were lower than those in atmospheric pressure and room temperature. No diffence in the leaching rate with sea and distilled water was observed for the bitumen-waste products containing 40wt% salts. It appears that these results could be saved by improving safety in the dumping of sea. The effect of the softening point of pure asphalt or bitumen-waste product by $^{60}$ Co irradiation was increased with increasing total dose. Irradiation of asphalts at a total dose of 5.8$\times$10$^{8}$ rad showed no evidence of volume and caused no swelling. The functional groups of blown asphalt by infrared spectra are also identified.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.60-65
• /
• 2022

This study presents the carburization process for recycling sludge, which was formed during silicon wafer machining. The sludge used in the carburization process is a mixture of silicon and silicon carbide (SiC) with iron as an impurity, which originates from the machine. Additionally, the sludge contains cutting oil, a fluid with high viscosity. Therefore, the sludge was dried before carburization to remove organic matter. The dried sludge was washed by acid cleaning to remove the iron impurity and subsequently carburized by heat treatment under vacuum to form the SiC powder. The ratio of silicon to SiC in the sludge was varied depending on the sources and thus carbon content was adjusted by the ratio. With increasing SiC content, the carbon content required for SiC formation increased. It was demonstrated that substoichiometric SiC_x (x<1) was easily formed when the carbon content was insufficient. Therefore, excess carbon is required to obtain a pure SiC phase. Moreover, size reduction by high-energy milling had a beneficial effect on the suppression of SiC_x, forming the pure SiC phase.