• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.213-219
• /
• 2012

Improving the physico-chemical properties of used media by mixing ratio of new plug media (NPM), used plug media (UPM) and perlite is necessary to improve seedling quality. In this study, five treatments were designed to investigate mixing ratio of UPM and NPM by ratio of volume 0 : 100, 25 : 75, 50 : 50, 75 : 25, 100 : 0, respectively. On the other hand, nine treatments were designed to investigate of perlite volumes were added to UPM and mixed media (UPM : NPM (50 : 50)) with 0, 5, 10, and 20% of ratio volume. The physicochemical properties of all mediums and their effect on growth response of tomato and cucumber seedlings were determined. The result indicates that physical properties was improved when NPM was mixed with UPM and at mixed ratio of volume 50 : 50 (v : v) has similar pore spare, bulk density and water retention to NPM. Seedling quality of tomato and cucumber in mixed media (50 : 50) are better than other mixed ratio and similar to NPM. Addition perlite to UPM and mixed media 50 : 50 (v : v) increased the pore space and water retention. Physical properties such as particle density, pore space and bulk density were increased when perlite volume increased. However, the best of seedling quality was observed by the addition at 10% volume of perlite. These results suggested that optimum of mixed ratio for recycled used media is new media and used media 1 : 1 mixed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.349-352
• /
• 2010

This is conceptual study of vitiated air heater(VAH), the necessary ground test facility, for characteristics studies of scramjet combustion and development of scramjet engines. The VAH is one of various types which provided hot air to an intake or a combustion chamber of scramjet and it must use suitable fuel to get hot combustion gas and more similar mixture gas(vitiated air) to real air. In the study, foreign VAHs being capable of providing very high temperature were researched, and injectors for VAH using LNG(CH4) or hydrogen were designed conceptually to develop scramjet vehicle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.26-35
• /
• 2000

This paper depicts the computational results for the axisymmetric subsonic/sonic ejector systems with a second throat. The numerical simulations are based on a fully implicit finite volume scheme of the compressible Reynolds-Averaged Navier-Stokes equations in a domain that extends from the stagnation chamber to the ejector diffuser exit. In order to obtain practical design factors for the subsonic/sonic ejector systems which are applicable to industrial vacuum pumps, the ejector throat area, the mixing section configuration, and the ejector throat length are changed in computations. For the subsonic/sonic ejector systems operating in the range of low operation pressure ratios, the effects of the design factors on the vacuum performance of the secondary chamber are discussed.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.9-23
• /
• 2023

In this study, the design methods of self-supported retaining wall with cement treated soil constructed by vertical mixing method (trencher mixing method, V-DCM), which are using in domestic and foreign field, are investigated, and the characteristics of it are presented with comparing the results of numerical analysis with the drainage and construction conditions. The results indicated that the method 1 (total stress analysis) is the most aggressive, and method 2 (effective stress analysis) and method 3 are similar in the internal stress, and the stress and the horizontal displacement are effected on the soil type and drainage conditions in backfill of the wall. Also, in the case of the design combined with numerical analysis the method 1 can be applied, in that of the traditional design without the analysis the method 2 or the method 3 can be used. Finally, if the numerical analysis is only conduct, the tensile stress in excavation base and in boundary of the wall and the original ground have to be considered in the numerical analysis method.

• Journal of the KSME
• /
• v.27 no.6
• /
• pp.504-514
• /
• 1987

복잡한 전자부품의 조립시에 필요한 열적 디자인에 관한 정보는 오래전부터 실험을 통하여 얻어지고 있다. 실험적 데이터를 이용하여 무차원 파라미터로 표시된 실험결과는 꼭 같지는 않지만 현상적으로는 비슷한 상황에 응용될 수 있다. 여기서는 학술문헌에 나타나 있는 자연대류에 관한 실험적인 상관관계식들과 프레임에 수직으로 꽂혀있는 균일가열 전자회로기판의 모델에서 얻어진 무차원 자료들을 비교하고자 한다. 대부분의 자료들은 수정채널 Rayleigh수(Ra")가 15~100범위에 속하며, 이러한 범위는 부품이 조밀하게 배치된 기관이 서로 좁은 채널을 이루고 있으며, 동시에 상당한 전력을 소비하고 있는 경우에 해당한다. Wirt와 Stutzman, Bar-Cohen과 Rohsenow의 일반상관관계식은 AT'||'&'||'T Bell 연구소에서 개발된 전자기기를 이용하여 수집한 실험데이터를 잘 표현하고 있으며 10 < Ra" <1,000범위에서 추천될 수 있다. 두개의 유사한 상관관계식과 비교할 때 상당히 좋은 예측을 보였으며 또한 Sparrow와 Gregg의 연구결과와도 잘 일치하므로 Ra" < 10인 경우에 Aung의 완전발달층류의 채널유동방식, Ra" > 1,000인 경우에는 Aung등의 단일 수직평판 근사식이 추천될 수 있다. Coyne의 알고리즘에 의한 계산치는 10

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.35-41
• /
• 2002

본 연구는 기존 벼 펠렛종자 제조장치의 제조성능 및 제조 벼 펠렛종자 품질향상을 위하여 펠렛재료 공급부, 성형부, 펠렛종자 배출부를 개선 설계 제작하여 그 성능과 제조 벼 펠렛종자 특성을 구명함으로써 직파용 벼 펠렛종자 대량생산을 위한 제조장치 개발의 기초 자료를 얻고자 수행하였으며 그 주요 결과를 요약하면 다음과 같다. 펠렛재료의 일정한 공급과 펠렛재료가 성형 홈으로부터의 이탈하는 것을 줄이고, 펠렛종자의 완전한 배출이 가능하도록 한 벼 펠렛종자 제조장치를 설계·제작하였으며, 벼 펠렛종자 제조장치를 상토 종자혼합비, 성형롤의 회전속도에 따라 실험한 결과 벼 펠렛종자 제조 능력은 성능 개선 전의 펠렛종자 제조장치에 비하언 약 1.7배 향상된 제조능력을 보였으며, 성형률은 최대 약 89 %로 나타나 개선 전의 71%에 비해 18 %정도 성형률이 향상되었다. 그러나, 벼 종자손실률은 약 24% ∼ 49%로 거의 비슷한 수준인 것으로 나타났다. 제조된 벼 펠렛종자의 특성을 분석한 결과 펠렛종자의 구형률은 99.1%로 거의 구형으로 제조됨을 알 수 있었으며, 무게는 제조 직후에는 약 1.70 g, 완전 건조 후에는 1.31 g으로 나타났고, 직경은 약 12.03 mm에서 건조 후 11.53 mm로 축소되었다. 개선 전에 비해 직경과 무게가 약간씩 증가한 것으로 나타났다. 이러한 결과는 재선된 제조장치에서 펠렛재료가 성형롤의 성형 홈에 압축 공급되고, 펠렛재료의 손실도 적었기 때문으로 판단된다. 제조된 한 개의 벼 펠렛종자 내에 포함된 완전 벼 종자의 개수는 상토 종자혼합비가 커질수록 성형롤의 회전속도가 낮을수록 많아지는 것으로 분석되었으며, 모두 펠렛종자 당 평균 약 3 개 이상의 완전 벼 종자를 포함하고 있는 것으로 나타났다. 개선 전에 비하여 펠렛종자 내에 포함된 평균 완전 종자수도 증가하였으며, 3개 이상 완전 종자를 포함한 펠렛종자의 비율도 증가하여 유압에 의한 펠렛재료 공급과 성형롤의 개선효과가 있었던 것으로 보인다. 음지 건조 후 벼 펠렛종자의 압축강도는 약 132 N ∼ 152 N으로 조사되었으며, 개선전에 비하면, 약 30 %가 증가한 것으로 나타났다. 출아율 실험 결과 상토 종자혼합비 6 : 1, 성형롤 회전속도 7 rpm에서 건답직파는 100%, 답수직파는 97 %의 출아율을 보여 만족할 만한 결과를 얻었으나, 그 외의 경우는 거의 90 % 이하의 출아율을 보여 출아율을 높이기 위한 방안이 필요한 것으로 보인다. 본 연구의 벼 펠렛종자 제조장치의 적정운전 조건은 제조된 벼 펠렛종자의 특성과 출아율을 고려해 볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다.

• Archives of design research
• /
• v.16 no.4
• /
• pp.443-452
• /
• 2003

This study is to find out the possibility of applying the Blended Learning which combines the advantage of face-to-face classroom instruction and e-Learning to design education. This Blended Loaming Model has five steps such as 'prepare, teach, show, interact, and collaborate'. It is designed by the learning decision points (performance outcomes, content stability and structure, audience size, and so on) and the characteristics of delivery methods(asynchronous, synchronous). This research is based on the learners' satisfaction data of each step. The number of the participants is 27 and a questionnaire with 21 items is administered. Ten items of them are designed with 5-point Likert scales and the rest of them ask learners describe the reason of their selection. The result show that learners are satisfied with the blended learning than the off-line classroom. It is expected that the blended learning can be a substitute of the off-line classroom for the effectiveness of design education.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.792-798
• /
• 2007

catalytic combustion is accomplished by the chemical reaction between fuel and oxidizer at the catalyst surface, different from conventional combustion. Therefore, it is important that the fuel and air stream are well mixed and supplied uniformly prior to the combustion region. If the flow is maldistributed, a hot spot may occur that can lead to subsequent catalyst and substrate damage. Therefore, in order to enhance the mixing and flow uniformity, in this study, the perforated plate is used. A numerical simulation is performed to investigate the variation of flow characteristics by changing various parameters. Under each condition, the uniformity of the flow stream at the entrance of the catalyst section is evaluated and compared. The results show that the uniformity can be effectively improved for most of the case by using the well-designed perforated plates.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.163-174
• /
• 1999

This paper presents a case history of remedial action adopted for contaminated groundwater in a landfill. The objectives of the projects are : (1) to effectively confine contaminated groundwater with an economically reasonable means, (2) to prevent further contamination of soil by collecting and treat the contaminant. and (3) to assure the environmental safety of the landfill during its operating period. Reported are the process from site investigation, through design and construction of an appropriate remedial action, to the monitoring of the selected confinement system. In view of the results of site investigation, deep soil mixing cutoff wall using the DMW(deep soil mixing cutoff wall) method and specially produced HEC soil stabilizer were used for the construction of deep soil mixing cutoff wall. For rock foundation with sever fractures, chemical grout curtain with urethane was installed. The monitoring results to date indicate that the selected vertical barrier performed satisfactorily.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.1
• /
• pp.109-120
• /
• 2003

Recently, as more web-based applications are widely used, various methods for education are developed in practical areas. As a result, in many organizations, virtual educations such as WBI learning. CAI, and distance learning are offered actively. With the advantages of web-based education, in order to achieve feasible and efficient effects on education. a new web-based instruction model that considers the abilities, the interests, and the aptitudes of students individually is required. In this paper, a new web-based instruction model, called a hybrid model, is proposed and implemented. And then, two model - the stepwise model and the hybrid model- are applied to a computer accounting class of a vocational high school. Students attend the web-based class in a computer center for 100 minutes autonomously. After the classes, a questionnaire is made in order to analyze both the effect on that class and the learning fulfillment of the proposed instruction model.