• Agrochemical news magazine
• /
• v.22 no.9 s.172
• /
• pp.14-17
• /
• 2001

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.379-384
• /
• 2011

The critical micelle concentration (CMC) and the counter ion binding constant (B) for the mixed micellizations of DBS (sodium dodecylbenzenesulfonate), SDS (sodium dodecylsulfate), and Brij 30 (polyoxyethylene(4) lauryl ether) at $25^{\circ}C$ in pure water were determined by the use of electric conductivity and surface tension measuring methods. Various thermodynamic parameters ($X_i,\;{\gamma}i,\;C_i,\;a_i^M,\;{\beta}$, and ${\Delta}H_{mix}$) were calculated and compared with each other mixed surfactant system by means of the equations derived from the nonideal mixed micellar model. The results show that the SDS molecule interacts more strongly with Brij 30 molecule than DBS molecule and that the SDS/Brij 30 mixed surfactant system has the greatest negative deviation from the ideal mixed micellar model and the SDS/DBS mixed system has followed almost the ideal mixed micellar model.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.876-880
• /
• 1999

The surfactant self-diffusion coefficients of mixed micellar solutions of ionic and nonionic surfactants have been measured by the NMR pulsed field gradient spin echo(FT-PGSE) method. In addition, the line widths of $^1H$ NMR signal have been monitored. The system investgated are $C_{12}EO_5/SDS/D_2O$, $C_{12}EO_5/DTAC/D_2O$, and $C_{12}EO_8/SDS/D_2O$. In the sample series, the molar ratios of $D_2O$ to surfactant(ionic+nonionic) were kept constant while the surfactant mixing ratio was varied. For the $C_{12}EO_5$ system, the surfactant self-diffusion coefficient indicates minimum when the surfactant mixing ratio is about 20% ionic surfactant. The observed decrease in self-diffusion coefficients as nonionic surfactant was replaced by ionic surfactant is interpreted to mainly be due to an increased micelle-micelle repulsion. The increase in self-diffusion coefficients occurring at higher fraction of ionic surfactant is shown to be due to a decrease in micelle size. For the $C_{12}EO_8$ system, the effect of the surfactant mixing ratio is much weaker which can be understood by considering the molecular geometry and large headgroup area. The proton NMR line widths correlate well with the self-diffusion coefficients and broadening of the alkyl chain methylene signals is found when the self-diffusion coefficients is low.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.171-176
• /
• 1998

The effect of non-ionic surfactants added by hydroxides was studied to wash HOCs-contaminated soil. The kinds and concentrations of additives-mixed surfactants suitable for the soil washing were found. The effects of temperature on the soil washing were analyzed and the relations of HLB and cloud point were estabilished. As the base strength was increased, the washing efficiency was increased : NaOH＞KOH＞ Mg(OH)$_2$>Al(OH)$_3$. Washing efficiency was not enhanced by Al(OH)$_3$for coagulation effect. When NaOH was added to POE$\_$5/ washing efficiencies by 0.01 M and 0.1 M solutions were increased to 62.5% and 67.3%, respectively. At 1 M of NaOH washing efficiency was decreased to 4.2%. The Optimum concentration ratio of mixed surfactant ［POE$\_$5//POE$\_$14/] was 1.8%/1.2% without additives. But optimum concentration ratio of surfactants was changed to 1.2%/1.8% with 0.01 M of NaOH addition. The surface tensions and CMCs of mixed surfactant added by NaOH solutions were investigated. The addition of NaOH reduces the surface tension of more hydrophobic surfactants. The nonionic surfactant of higher HLB showed highed cloud point.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.2
• /
• pp.15-29
• /
• 2020

The aims of this study is to improve physical properties of the sewage sludge and the process sludge generated in the leachate treatment by mixing the dry fuel, to develop the neutral solidifing agents that reduce oder, and to recycle the sewage and the process sludges as landfill cover materials. The mixing ratio (W/W) of sludges and dry fuel was appropriate at about 1:1, and the mixed materials were shown to be homogeneous at that ratio. We could know that when the sludges were mixed with dry fuel, moisture contents and viscosities are reduced, and air passages are formed between particles and particles. The various mixing tests and odor tests showed that the neutral solidifing agent was effective for the odor reduction. The main ingredient of the solidifing agent is the ash of sewage sludge, enabling it competitive in waste recycling and production costs. The landfill cover, using developed neutral solidification agent, improved physical properties to satisfy the quality standards and to increase the compressive strength. It also proved to reduce the value of complex oder and the usage of solidification agent to 1/3 (3,000 to 1,000) and to 1/8 (50% to 6%), respectively, from the comparative study with alkaline solidified landfill cover. Further research is under way to prove that this can be mixed with general soil to be used as a soil improvement agent for plant cultivation.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2021

The aim of this paper is to improve durability of cement paste by imparting hydrophobicity to the surface and sphere of cement-based materials. A cement paste mixed with a silane/siloxane-based water repellent, and the initial hydration performance, flow performance, and age-specific compressive strength were measured. In addition, the water contact angle, SEM, and XRD before and after surface polishing were measured. When 0.5% of the silane/siloxane-based water repellent was mixed into the cement paste, the compressive strength increased, but the compressive strength decreased as the mixing amount increased by 1.5% and 3.0%. When a silane/siloxane water repellent was incorporated into the cement paste, the hydrophilicity was improved and the contact angle was increased due to hydrophobicity. In addition, the contact angle after surface polishing was found to be larger than the contact angle before surface polishing.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.237-243
• /
• 1988

Field study was conducted to evaluate safening effect of fenclorim (4,6-dichloro-2-phenyl pyrimidine) against benthiocarb, butachlor, and pretilachlor injury in rice plants under vinyl-covered subirrigated seedbed. Combinated application of benthiocarb 210, and 315 g ai/10a with fenclorim 10 g ai/10a or higher concentration, butachlor 180, and 270 g ai/10a with fenclorim 20 g ai/10a or higher concentration, and pretilachlor 60, and 90 g ai/10a with fenclorim 30 g ai/10a reduced herbicide injury of rice, and thus increased standing, plant height, tillers, and dry weight of rice plants compared to no combined application of fenclorim.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1186-1191
• /
• 1999

By using a liquid-mix precursor, we prepared the hollow glass spheres(HGS) as an additive of polymer compound which are used in the field of modifier, promoter, filler, and reinforcement. Liquid-mix precursor is a mixture of 40% sodium silicate aqueous solution, boric acid as a insolubilizing agent, and urea as a blowing agent. To obtain the precursor particles which are fed into a gas flame furnae, the above liquid-mix precursor was dried in oven and crushed with ball mill. We assumed the size of precursor particles ($53{\sim}63{\mu}m$, $63{\sim}180{\mu}m$), temperature of furnace($800{\sim}1200^{\circ}C$), and amount of urea(0~30 g) as the parameters affecting on the properties of HGS. As a result mean particle size of HGS increases with increasing the temperature of furnace and the amount of urea and with decreasing the size of precursor particles. Also, we found that incresing the amount of urea is related to a decrease of the crush strength of HGS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.216.2-216.2
• /
• 2010

본 연구에서는 $H_2+CO_2$(40%) 혼합기체로부터 이산화탄소를 효과적으로 분리/회수 하기 위하여 가스 하이드레이트 형성법을 제안하였다. 하이드레이트의 형성 조건을 보다 완화시켜 주기 위하여 열역학적 촉진제로서 TBAB (Tetra-n-butyl Ammonium Bromide, $(C_4H_9)_4NBr$))와 THF(Tetrahydrofuran)를 각각 첨가하여 열역학적 촉진 현상을 살펴보았다. 다양한 농도의 TBAB(10, 40, 60 wt%)와 THF(1, 5.56, 10 mol%)에 대하여 3상(H - Lw - V) 평형을 측정하였다. 그 결과 40 wt%의 TBAB와 5.56 mol%의 THF의 농도에서 가장 큰 촉진효과를 보였으며 그 이상의 농도에서는 오히려 촉진효과가 줄어드는 것을 확인할 수 있었다. 이러한 결과는 혼합가스 하이드레이트 형성시 양론비 이상의 TBAB와 THF가 첨가될 경우 반응에 참여하지 못한 TBAB와 THF가 가스 하이드레이트 형성을 방해하기 때문이다. 열역학적 촉진제로서 실제공정에 적용할 경우 40 wt%의 TBAB와 5.56 mol%의 THF를 사용하는 것이 가장 효과적일 것으로 사료된다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성법을 이용한 합성가스 분리 공정 개발에 중요한 기초 자료가 될 것이다.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.88-88
• /
• 2003

로켓 엔진 시스템에는 가압가스로 추진제를 엔진으로 공급하는 가압 시스템과 터보펌프를 이용해 엔진으로 고압의 추진제를 공급하는 터보펌프 시스템으로 나눌 수 있으며 터보펌프 시스템은 다시 Gas Generator를 이용하는 개방형 엔진과 Prebumer를 이용한 폐쇄형 엔진인 다단 엔진으로 구분할 수 있다. 로켓의 엔진 시스템은 Turbine, Turbopump, Gas Generator, Thrust Chamber, Tube, Valve, Propellant Tank 등 각 구성품 간에 서로 상호간섭이 매우 심한 공정이다 로켓 엔진 시스템은 이와 같은 상호간섭에 의해 추력 제어 및 혼합비 제어, 추진제 소진 제어 적용 시 정확하고 강인한 제어를 수행하여야 한다. 이를 위해 정확한 동특성 모델을 구축하는 것이 중요하며 모델을 통해 적절한 제어 시스템을 선택하여야 한다. 그러나 현재 국내에는 이에 대한 연구가 미미하며 해외의 경우 로켓은 특수 분야에 속함으로 공개되어 있지 않다. 로켓에 대한 개발 연구에 있어서는 위와 같은 작업이 선행되어야 하며 이에 대한 선행 연구로 한국항공우주연구원에서 Gas Generator를 이용한 개방형 터보펌프 엔진 시스템에 대한 연구를 진행하고 있다. 본 논문에서는 Gas Generator를 이용한 개방형 터보펌프 엔진시스템에 대한 동특성 모델을 구성하였다. 배관부, 터빈, 펌프, 밸브, Gas Generator, 재생냉각, 추력연소실 등 엔진 시스템을 구성하는 구성품에 대한 동특성 모델을 구성하였으며 이를 matlab의 simulink를 통해 각 구성품을 연결하여 최종 엔진시스템의 동특성 모델을 구성하였다. 구성된 동특성 모델을 통해 각종 변화(추진제 밀도 변화, 추력 변화, 혼합비 변화 등)에 대한 엔진 시스템 변화를 예측하여 정확한 엔진 시스템에 대한 이해를 넓혔으며 추력 제어 및 혼합비, 추진제 소진 제어를 최적으로 할 수 있는 제어 시스템 구축을 위한 기초 자료로 이용할 수 있을 것이다.