• The Korean Journal of Mycology
• /
• v.13 no.3
• /
• pp.169-177
• /
• 1985

The studies were carried out to obtain the basic data for maximizing the protoplast yields from the mycelia of P. ostreatus and P. sajor-caju. Some factors affecting the regeneration of the protoplast of both species and the productivity of their reversion were also examined. The maximum yields of protoplasts were obtained from four days cultured mycelia of both species on cellophan membrane placed on the surface of PSA or MCM media in a petri dish. The optimal concentration of lytic enzyme Novozym 234 for protoplast releasing was 5 mg per ml of 0.5 M phosphate buffer solution with 0.6 M sucrose or 0.6 M $MgSO_4$ at pH 6.0. The greatest number of protoplasts was released 3 hours after incubation of the mycelia of P. ostreatus and after 4 hours for the P. sajor-caju in the lytic enzyme solution. Among the osmotic stabilizer solutions tested 0.6 M sucrose and 0.6 M KCl showed the best regeneration rates of the protoplasts of both species. When 0.75 % agar solution was over-layed on the regeneration media immediately after inoculation of the protoplast the regeneration rates were greatly enhanced. The ampicillin added to the agar solution prevented bacteria from infection. The reverted isolates produced the sporophores and basidial spores just like their parents without any mutations when they were cultivated in a broad mouth bottle with sawdust substrates.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.257-264
• /
• 1999

The trickling system for automatic and individual watering were made with Bunchungto, Ongito and Backjato. The thickness of ceramics were 1.0, 1.5, 2.0, 2.5 and 3.0mm. And they were fired in a muffle furnace at five different temperatures between 500 and 900'E during 12 hours. The upper plastic parts of sensor consisted of five elements made by steel mold. With the photo fiber sensor attached to datalogger, an accumulated amount of drops for every 10 minutes were recorded. The porosity is higher in the order of Bunchungto, Backjato and Ongito; also, as the firing temperature is higher and the thickness is thicker, the porosity is higher. The ceramic sensors consisted of $SiO_2$ of 54.17~71.62wt.%, A1$_2$ $O_3$ of 15.42~33.79wt.% and the rest of 10wt.%, those were Fe$_2$ $O_3$, CaO, MgO, Na$_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$. The pattern of dropping were changed according to the variety, thickness and firing temperature of ceramics. As the ceramics were made thicker, the fluctuation of dropping became more rapid, but it did not regularly work at 1mm thickness. As the firing temperature of ceramics became higher, the fluctuation of dropped amount became more rapid.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.132-142
• /
• 2009

The Tamar rift valley runs through the City of Launceston, Tasmania. Damage has occurred to city buildings due to earthquake activity in Bass Strait. The presence of the ancient valley, the Tamar valley, in-filled with soft sediments that vary rapidly in thickness from 0 to 250mover a few hundreds metres, is thought to induce a 2D resonance pattern, amplifying the surface motions over the valley and in Launceston. Spatially averaged coherency (SPAC), frequency-wavenumber (FK) and horizontal to vertical spectrum ratio (HVSR) microtremor survey methods are combined to identify and characterise site effects over the Tamar valley. Passive seismic array measurements acquired at seven selected sites were analysed with SPAC to estimate shear wave velocity (slowness) depth profiles. SPAC was then combined with HVSR to improve the resolution of these profiles in the sediments to an approximate depth of 125 m. Results show that sediments thicknesses vary significantly throughout Launceston. The top layer is composed of as much as 20m of very soft Quaternary alluvial sediments with a velocity from 50 m/s to 125 m/s. Shear-wave velocities in the deeper Tertiary sediment fill of the Tamar valley, with thicknesses from 0 to 250m vary from 400 m/s to 750 m/s. Results obtained using SPAC are presented at two selected sites (GUN and KPK) that agree well with dispersion curves interpreted with FK analysis. FK interpretation is, however, limited to a narrower range of frequencies than SPAC and seems to overestimate the shear wave velocity at lower frequencies. Observed HVSR are also compared with the results obtained by SPAC, assuming a layered earth model, and provide additional constraints on the shear wave slowness profiles at these sites. The combined SPAC and HVSR analysis confirms the hypothesis of a layered geology at the GUN site and indicates the presence of a 2D resonance pattern across the Tamar valley at the KPK site.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.411-416
• /
• 2013

This study was conducted not only to analyze ${\alpha}$-glucosidase inhibition activity with fronds and rhizomes of nine Pteridophyte species, but also to select the plant materials suitable for natural ${\alpha}$-glucosidase inhibitor. Harvested rhizomes and fronds were washed, freeze-dried and grinded. After conducting ultrasonification extraction for 30 minutes in ultrasonic water tank with 100% methanol solvent, and vacuum filtration, ${\alpha}$-glucosidase inhibition activity was measured. Acarbose was used as the positive control. After mixing $100{\mu}L$ of 0.7 unit ${\alpha}$-glucosidase enzyme solution into $50{\mu}L$ of extract and reacting them at $37^{\circ}C$ for 10 minutes, $50{\mu}L$ of 1.5 mM ${\rho}$-NPG solution was taken and reacted at $37^{\circ}C$ for 20 minutes. The reaction was stopped with 1 mL of 1 M $Na_2CO_3$ and absorbance was measured in 405 nm. With the regression analysis, the content of solubility solids (the value of $IC_{50}$) which can inhibit 50% of 0.7 unit ${\alpha}$-glucosidase solution's activity was investigated. The frond ($IC_{50}=14.00{\sim}913.33{\mu}g{\cdot}mL^{-1}$) and rhizome extracts ($IC_{50}=12.93{\sim}205.84{\mu}g{\cdot}mL^{-1}$) of nine Pteridophyte species showed higher ${\alpha}$-glucosidase inhibition activity in comparison with acarbose ($IC_{50}=1413.70{\mu}g{\cdot}mL^{-1}$). The extracts of fronds and rhizomes showed higher value than acarbose by 1.55~100.98 and 6.87~109.33 times each. Especially, ${\alpha}$-glucosidase inhibition activities of Pyrrosia lingua in fronds and Osmunda cinnamomea var. fokiensis in rhizomes were the highest. The necessary biomass of fronds and rhizomes for inhibiting 50% of ${\alpha}$-glucosidase activity showed the lowest value, 0.35, 0.27 mg each, in O. cinnamomea var. fokiensis. $IC_{50}$ value of P. lingua was the highest among fronds of nine Pteridophyte species, but content of soluble solids was 2.4 times less than O. cinnamomea var. fokiensis. So frond of O. cinnamomea var. fokiensis is more economic in comparison with P. lingua. As the result of this study, O. cinnamomea var. fokiensis showed high ${\alpha}$-glucosidase inhibition activity even with small biomass. Therefore it was considered to be high-valued economic material as natural ${\alpha}$-glucosidase inhibitor.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.283-292
• /
• 2004

This study was conducted to investigate feeding effects of the high pressure boiled extracts (HPBE) of the Ogol chicken with herbs on glucose, hormones and immunological response (cytokine, specific antibody) of serum in the rat which fed either with normal feed (T$_1$), normal feed + herb HPBE (T$_2$), normal feed + Ogol chicken HPBE (T$_3$), normal feed + mixture of cross-bred Ogol chicken HPBE (T$_4$) hydrolyzed with Flavourzyme 0.1% for 35 days. During experimental period, there was a weak trend to have a higher glucose content for the T$_4$ group with 102.27${\pm}$5.95 mg/dL, but it was not significantly higher than other treatments. For insulin level, T$_1$ group showed numerically a slightly higher level with 6.79${\pm}$4.64 ${\mu}$IU/mL, but the difference was not significant in statistic term due likely to a large variation in comparison with other treatments. The treatments did not significantly alter testosterone level in rat plasma with 1.09, 1.46, 0.98, 1.13 ng/mL in T$_1$, T$_2$, T$_3$ and T$_4$, respectively. T$_4$ treatment increased the aldosterone level to a significantly (p<0.05) higher level (273.33 ng/dL) than other treatments. The extract treated rat showed a tendency in the cortisol level of lower levels than the control group, particularly, it was significantly (p<0.05) lower in T$_3$ group than other groups. T$_3$ and T$_4$ groups showed higher levels for interlukin-4 (IL-4) and anti-BSA IgG in immune cells and plasma. T$_2$, T$_3$ and T$_4$ treatments showed a slightly higher levels in v-interferon (INF-r) than the control, with a greater effect for T4 treatments. These results suggested that HPBE of the cross-bred Ogol chicken hydrolyzed with Flavourzyme increased immunological activity and decreased the concentration of cortisol and aldosterone hormones.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.357-368
• /
• 1996

To utilize the ascidian tunic as a natural pigment and dietary sources for rainbow trout (Oncorhynchus mykiss), juvenile were fed on experimental diets containing enzymatic hydrolysates of ascidian tunic treated with three commercial mined enzymes (ultrazyme, cellulase, viscozyme) for 12 weeks. From the results of feeding experiment, similar growth rate was checked in the enzymatic hydrolysis group compared with control, and those were a higher than of ascidian tunic powder group. The total acetone extractable pigment in muscle of the enzymatic hydrolysates group was lower than that of the ascidian extracts group and carophyll pink group until 8 weeks, but the level of those pigment of the enzymatic hydrolysates was similar to the ascidian extracts and carophyll pink group after 12 weeks. The lipid content was increased with the pigment concentration in the all experimental group. But the ascidian tunic pigment did not influence on the composition of the fatty acids in the muscle and liver. From the consideration of results for pigmentation, the enzymatic hydrolysates of ascidian tunic were suitable for both a natural pigment and dietary protein and carbohydrates sources as a substitute synthetic pigment for aquaculture use.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Korean journal of applied entomology
• /
• v.51 no.1
• /
• pp.47-58
• /
• 2012

Effect of a new crop protectant 'Bt-Plus' on natural enemies was analyzed in this study. Tested natural enemies included two parasitic species of $Aphidius$ $colemani$ and $Eretmocerus$ $eremicus$, and four predatory species of $Harmonia$ $axyridis$, $Orius$ $laevigatus$, $Amblyseius$ $swirskii$, and $Phytoseiulus$ $persimilis$. 'Bt-Plus' was formulated by combination of three entomopathogenic bacteria ($Xenorhabdus$ $nematophila$ (Xn), $Photorhabdus$ $temperata$ subsp. $temperata$ (Ptt), $Bacillus$ $thuringiensis$ (Bt)) and bacterial metabolite (BM). All three types of 'Bt-Plus' showed significantly higher toxicities against fourth instar $Plutella$ $xylostella$ larvae than Bt single treatment. Two types of bacterial mixtures ('Xn+Bt' and 'Ptt+Bt') showed little toxicity to all natural enemies in both contact and oral feeding assays. However, 'BM+Bt' showed significant toxicities especially to two predatory mites of $A.$ $swirskii$ and $P.$ $persimilis$. The acaricidal effects of different bacterial metabolites were evaluated against two spotted spider mite, $Tetranychus$ $urticae$. All six BM chemicals showed significant acaricidal effects. The BM mixture used to prepare 'Bt-Plus' showed a high acaricidal activity with a median lethal concentration at 218.7 ppm (95% confidence interval: 163.2 - 262.3). These toxic effects of bacterial metabolites were also proved by cytotoxicity test against Sf9 cells. Especially, benzylideneacetone, which was used as a main ingredient of 'BM+Bt', showed high cytotoxicity at its low micromolar concentration.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.107-115
• /
• 2000

Preservative effects of natural preservatives, citric acid and salt on chopped garlic were investigated. Bacterial multiplying and browning of chopped garlic were very effectively repressed by 0.5-1% citric acid. Salt had an effect on the repression of bacteria multiplying and browning of chopped garlic except for 1% NaCl. Synergistic effect between citric acid and NaCl was also very good for decreasing bacteria multiplying and maintaining Hunter color of chopped garlic. Compounded effect of the GF. citric acid. and ascorbic acid was somewhat proper in the sensory evaluation of chopped garlic. And the sensory evaluation score was the highest in chopping size 3mm(diameter) and viscosity 4500cp. of chopped garlic.