• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.481-498
• /
• 2017

Travel time reduction benefit is the most important benefit item in the feasibility study of transportation infrastructure investment projects and calculated by using the value of travel time. The current feasibility study guideline (5th edition) calculate the value of non-business ravel time in a metropolitan area, using the ratio of the value of non-business travel time to business travel time calculated based on the nationwide inter-regional traffic survey data of 1999. The characteristics of metropolitan trips are different from those of nationwide regional trips. Metropolitan trips have frequent transfers between multiple public transits and long-time commuter trips. Therefore, this research aims to calculate the value of travel time reflecting traffic characteristics in a metropolitan area by improving the limitation of current calculation methods. To reflect these characteristics, this research extracts commuter trips from non-business trips and calculates the value of travel time for commuter trips. The results of the likelihood ratio test for the commuter trip model and the non-business trip model are found to be statistically significant. An integrated public transportation model was also estimated in this study to reflect the trip conditions of the Seoul metropolitan area integrated fare system. The results of comparing coefficients between bus and subway in the integrated public transit model indicated that there were no statistically significant differences between the two modes.

• Korean Journal of Veterinary Research
• /
• v.40 no.4
• /
• pp.741-746
• /
• 2000

We have developed a rapid, simple and precise high-performance liquid chromatographic (HPLC) method using an UV detection system for the determination of new anti-HIV candidates, nineteen KR-V compounds, in rat plasma. We used a analytical columnn of $C_{18}$ ($5{\mu}m$, $250{\times}2.0mm$ I.D.) and a mobile phase of water and ACN mixture (40/60, v/v). Under these conditions, all the KR-V compounds were readily separated from plasma with retention times of 4-12 min. The limits of quantitation for the 19 KR-V compounds were 15-30 ng/ml. The recoveries from the plasma were higher than 85% (C.V.<10%) with exception of KR-V 2, 7 and 15. The compounds KR-V 2, 7 and 15, containing ester moieties, were found to be unstable in plasma. This result suggests that esters, like KR -V 2, 7 and 15, should be excluded from future structure design studies of anti-HIV KR-V agents. In conclusion, the current HPLC method is a valuable analytical tool for investigating the pharmacokinetics of the KR-V series in rats.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.137-142
• /
• 1983

The effects of various factors on germination of dormant Digitaria sanguinalis seeds were studied to obtain the basic informations on establishing an effective control method in upland crops. Germination of dormant seeds was most significantly promoted by light treatment, about 88-89%, and followed by the treatment of alternating temperatures (15 or 20$^{\circ}C$ to 35$^{\circ}C$), showing the similar effects like light. Removal of seed coats also increased germination of dormant seeds by 72%, next to the treatments of light and altering temperature. Potassium nitrate ($KNO_3$) at $10^{-2}M$ and concentrated sulfuric acid ($H_2SO_4$) treatment at the duration of 8 minutes resulted in 20% and 37.8% of germination of dormant seeds, respectively, which were significantly higher than that of the untreated control. Under the conditions of altering temperature, gibberellic acid (GA) at $10^{-3}M$ to $10^{-6}M$, benzylandenin (BA) at $10^{-4}$ to $10^{-7}M$ and their combination had no effect on breaking of dormant weed seeds, and instead inhibited the promotive effects induced by the alternating temperature. However, under the constant temperature at 35$^{\circ}C$ in dark, all these treatments increased germination as much as 20% over the untreated control.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.243-248
• /
• 2015

This study was conducted to investigate the ability for weed control of the shoot extract of sorghum (Sorghum bicolor (L.) Moench) and developing a sustainable weed management in organic farming. When the dried shoot powder was mixed with soil and treated with 2 cm above the soil surface, the germination for Echinochloa crus-galli, Digitaria cilialis, Abutilon theophrasti and Amaranthus retroflexus was inhibited maxium 40%. The growth inhibition of germinated seedlings in the A. theophrasti and A. retroflexus was maxium 30% while it was less than 30% in the E. crus-galli and D. cilialis. Shoot extracts at rates above $25mg\;ml^{-1}$ was effective to inhibit germination of D. cilialis, A. theophrasti and A. retroflexus. The shoot extract concentration required for 50% of germination inhibition was $60mg\;ml^{-1}$ in the E. crus-galli, while it was less than $10mg\;ml^{-1}$ in the D. cilialis, A. theophrasti and A. retroflexus. For the foliar application, 11 adjuvants were tested at 0.5% and DOS70, TM15 and TDE7 were most effective adjuvants for the shoot extracts. DOS70 was most effective and provided up to 60% of weed control efficacy for the tested four weed species. Though herbicidal efficacy of sorghum shoot was not enough to give a proper weed control, it can be expected that long term use of sorghum shoots can provide gradual decrease in weed seeds and weed density.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.154-159
• /
• 2008

To investigate the rheological properties of protein mixed gels mediated by microbial transglutaminase (MTGase), pork myofibrillar protein (MFP), sodium caseinate (SC) and their mixture (MS), the various gels were incubated at different temperatures for various times. Extracted MFP, SC and their mixture (MS, 1:1) were incubated at different temperatures ($4^{\circ}C$ vs $37^{\circ}C$) for various times (0, 0.5, 2, 4 hr), and assessed for viscosity, gel strength and other characteristics using differential scanning calorimeter (DSC) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). DSC measurements showed that incubation at $37^{\circ}C$ rather than $4^{\circ}C$ caused marked changes in thermal transition, and MS displayed similar thermal curves (three endothermic transitions) to MFP and SC alone. After incubation at $37^{\circ}C$ for 2 hrs, the viscosity (cP) of MS increased (p<0.05) due to induction by MTGase, whereas no differences were observed at $4^{\circ}C$. However, gel strength values were no different, regardless of incubation temperatures and times. Future research will address how longer incubation times affect the functionality of protein mixed gels mediated by MTGase.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.199-204
• /
• 2017

In this study, a study was carried out for the separation of metal ions in lignin extract discharged from the pulp process. alumina powders were mixed with DMAc (N, N-dimethylacetamide) solvent and PESf (Polyethersulfone) polymer, PVP (polyvinylpyrrolidone) dispersant was added and slip casting method was used to prepare the membrane. The membrane was measured for pore size through a CFP (Capillary Flow Porometer) device and the surface and cross-section of the membrane were observed through a FE-SEM (Field Emission Scanning Electron Microscope). The flux was calculated by measuring the filtered weight per hour using a separation experiment device. Pore size measurements were performed under increasing pressure from 0 psi to 30 psi. The pore size of the membrane was $0.4{\mu}m$ and the flux decreased from the initial flux value of $6.36kg{\cdot}m^{-2}{\cdot}h^{-1}$ to $1.98kg{\cdot}m^{-2}{\cdot}h^{-1}$ due to the fouling of the membrane. After the permeation experiment, membrane contaminants were removed by simple washing. Separation experiments showed that Na contained in the initial lignin extract was reduced by 69%, Fe was removed by 87%, K by 95%, Ca by 93% and Mg by 96%.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2018

Finding the blood left at a crime scene is very important to reconstruct or solve a criminal case. Although numerous reagents have been developed for use at crime scenes, luminol is the most representative. Bluestar Forensic has been used in recent years, but is expensive and cannot be stored after preparation. This study aims to develop a new luminol reagent that can be stored for a long period of time while maintaining the chemiluminescence intensity at the level of Bluestar Forensic. Because luminol dissolves well in aqueous alkaline solutions, the use of sodium hydroxide in the preparation of luminol reagents can promote the decomposition of hydrogen peroxide. Magnesium sulfate, sodium silicate, and potassium triphosphate have been used as hydrogen peroxide stabilizers. The effects of the addition of these substances on the chemiluminescence emission intensity and the storage period of the luminol reagents were confirmed. The addition of a hydrogen peroxide stabilizer was shown to have no significant affect on the chemiluminescence emissions intensity or stabilized pH of the luminol reagent during storage. It also greatly increases the shelf life of the reagents. The use of magnesium sulfate as a hydrogen peroxide stabilizer is the most appropriate. When sodium perborate is used instead of hydrogen peroxide as an oxidizing agent, there is no significant change in the sensitivity and chemiluminescence emissions intensity, but the storage period is shortened. However, after the reaction with blood, the pH of the mixed solution does not increase significantly, and is judged to be more suitable than a reagent made of hydrogen peroxide.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.63-63
• /
• 2002

현재 기계적 합금화법에서는 주로 합금을 구성하는 성분원소 분말을 불활성분위기에서 볼밀처리 함으로써 함금화를 시키거나 모합금에 산화물을 분산시켜 복합화시키는 공정을 통하여 각종 화합물, 비정질상 및 과포화고용체등의 준안정상의 합성 뿐만이 아니라 초미세조직의 생성에 관한 폭 넓은 분야의 연구가 행하여지고 있다. 한편 MA에서는 볼멀처리중 기계적 에너지의 투여에 의하여 실제 반응온도보다 낮은 온도에서 발생하는 특이한 화학반응 즉 Mechanochemical 반응을 일으키 기도 한다. 본 연구에서는 헤마타이트($Fe_20_3$)와 금속윈소인 Ti의 MA처리에 의하여 고상환원반응 을 유기시켜 $Fe-TiO_2$계 nanocomposite 분말재료를 제조하고자 한다. 특히 MA 공정에 있어서 자기 물성의 변화와 X선 회절을 통하여 고상환원반응에 의한 복합분말의 생성과정을 조사하였다. 출발원료는 $Fe_20_3$(고순도화학제,99.9%, 평균입경 0.1$\mu\textrm{m}$)와 금속원소인 Ti(99.9%, 명균업경 150$\mu\textrm{m}$)을 몰비 2:3의 조성이 되도록 하여 MA를 실시하였다. 볼멀은 고에너지 유성형 볼밀장치(독일 제, Fritsch P-5)를 이용하였으며 진공치환형 용기에 원료분말을 장입하여 2회정도 진공배기한 후 아르곤 가스를 충전하여 볼밀을 행하였다. 얻어진 분말시료에 대하여 x-선 회절장치, 전자현미경 (SEM) 및 진동시료형자력계(VSM)를 통하여 결정구조, 미셰조직 빛 자기특성을 조사하였다. $Fe_2O_3-Ti$ 혼합분말의 MA처리 에 의하여 초기단계부터 환원반응과 함께 $Fe_3TIO_{lO}$ 중간상이 관찰 되었으나 30hrs의 MA처리 후 Fe와 산화물 $TiO_2$로 모두 환원되어 $Fe-TiO_2$계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.575-579
• /
• 2006

Solid electrolyte interface is formed on a carbon electrode used as an anode in Li-ion battery, which can be of $Li^{+}$ intercalation/deintercalation during the first cycle. The passivation film formed by a solvent decomposition during the initial charge process affects cell performance and it was one of the main reason of an initial irreversible capacity. This paper describes the use, for the first time, of $Li_2CO_3$ as the additive for the formation of a passivation film on the carbon surface to suppress the initial irreversible reaction. Chronopotentiometry, cyclic voltammetry, and impedance spectroscopy were used to investigate the effects of the $Li_{2}CO_{3}$ additive. Scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction were also used to monitor changes in the surface morphology and composition of the passivation film formed by solvent decomposition and the precipitation of $Li_{2}CO_{3}$. The addition of $Li_{2}CO_{3}$ to a solution of 1 M $LiPF_{6}$/EC:MA (1:3, v/v) resulted in a decrease in the initial irreversible capacity and it was due to the suppression of the solvent decomposition on the electrode surface.