• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1992.05a
• /
• pp.64-64
• /
• 1992

1. Eudragit RS, RL, E, S 및 L을 이용하여 유중건조법으로 제조한 $\beta$-락탐계 항생제 (Amoxicillin, Cephalexin) 마이크로캅셀 모두가 구상 성형성과 정립성이 양호한 결과를 얻었다. 2. 분리 분산제 (aluminium tristearate)의 양을 고정시켰을 때에는 일정한 입자 분포도를 가지는 마이크로캅셀을 얻을 수 있었고, 양을 증가시켰을 때에는 입자 크기는 작아 졌으며, 용출율은 증가하였다. 3. Eudragit RS 및 S 마이크로캅셀제제로부터의 약물용출은 저조하였고, Eudragit RL 및 L 제제로부터의 약물용출은 양호하였다. 따라서 Eudragit RS/RL 마이크로캅셀제제에서는 Eudragit RL의 양을 증가시킬수록 약물의 용출율이 증가하였으며, Eudragit S/L 마이크로캅셀제제에서는 Eudragit L의 양을 증가시킬수록 약물의 용출율이 증가하였다. 약물방출 실험결과, Amoxicillin 함유Eudragit RS/RL (25/75) 마이크로캅셀, cephalxin함유 Eudragit RS/RL (75/25) 마이크로캅셀 및 Eudragit S/L (75/25) 마이크로캅셀제제는 유용한 제제로 펑가되었다. 또한 수용성 고분자인 polyethylene glycol을 혼합하어 제조하는 것에 의해 방출조절성 마이크로캅셀의 제조가 가능하였다. 유중건조법을 이용하여 본 연구방법으로 저조한 마이크로캅셀제제는 투어횟수를 줄일 수 있을 뿐만 아니라 생체에 대해 안전하고 재현성에 확보되는 유용한 제제로 판단된다. 앞으로 연구를 계속 수행하여, 특히 약물의 물리화학적 성질 및 생제내 투어 후의 생물약제학적 펑가를 엄격히 하므로써 안정성이 심히 문제시되는 다용 약물계열에 대한 조절방출성제제의 개발을 기대할 수 있다.은 해리항수의 역수이므로 해리항수가 적을수록 $\beta$ 수용체에 대한 친화력이 큰 약물이다. 시사되었으며, 이 조직에서 또한 5-$HT_2$와 5-$HT_3$ 수용체의 존재를 확인하고 각각의 기능을 분명히 했다.가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.1
• /
• pp.23-28
• /
• 1994

This study was rimed out to examine the difference in the cell vitality between mesophyII protoplast (MP) and paraveinal mesophyII protoplast (PVMP) of Nicotiana tabaccum 'Xanti', Petunia hybrida 'Blue Star' and Chrysanthemum morifolium 'Baeckwang' by using urea permeability technique. The effects of various enzyme solutions and incubation time, NAA and thidiazron on plant regeneration from isolated protoplasts were also investigated. The vibratome technique was used for protoplast isolation and urea permeability test because the fresh living, thin tissue stripes (50 ${\mu}{\textrm}{m}$ of thickness) could be obtained with minimal damage with the vibratome. For the three plants examined, the urea permeability on the tested tissue stripes was relatively higher in PVMP than in MP by about Ks = 2.0 $\times$ 10$^{-5}$ cm/sec. The treatment of an enzyme mixture of 1.5% cellulase R-10, 1% Driselase, 0.5% Macerozyme R-10, and 0.5% Pectinase for 4 to 8 h was effective on the isolation of PVMP. The highest frequency of callus formation and plant regeneration from the isolated protoplasts was obtained with NAA 2 mg/L and thidiazuron 0.01 mg/L. Furthermore, the results demonstrated that cell devision and plantlet regeneration was more frequent in the PVMP than in the MP of the same leaf or plant We, therefore, conclude that UM is an excellent experimental material for the callus formation and regeneration from isolated protoplasts.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.202-206
• /
• 1990

Field experiment was conducted to develop a model of controlled release of oxyfluorfen by using various split applications. Rice and some weed species was included in this study. The models of split applications were 10-10-0. 10-10-10. 20-20-0, 20-10-10. 20-20-20, 0-40-0, and 0-0-0g/Ha at 3days before transplanting, and 11 days after transplanting, respectively. Rice injury appeared dispeared at 20 g/Ha of oxyfluorfen on low leaf sheath but disappeared at few days. The injury was reduced by split application even at the same rate of application. However, no injury was siginificant at 30 days after transplanting. Barnyardgrass, Monochoria, and arrowhead were most susceptible to oxyfluorfen, but bulruch and most perennial weeds recovered after temporary growth inhibition. Therefore, to develop oxyflourfen for use in rice transplanting of adult rice seedling, split application with reduced rates, and development of expected to be tank-mixed or premixed with other perennial herbicides to obtain droad spectrum of weeds.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.406-411
• /
• 1998

Representive cured products such as ham and sausage produced in Korea were purchased at retail and cooked using heating tools such as a gas range (GR), an electric range (ER) and electric range after boiled (BE). Changes of N-nitrosamine (NA), nitrate and nitrite in the cured meats containing< $2.0\;\mu\textrm{g}/kg$ of N-nitrosodimethylamine (NDMA) were checked and analyzed during their cooking process. Contents of nitrate and nitrite in ham products prior to cooking were 2.0 and 1.8 mg/kg, respectively; their contents in regular hams were slightly increased, but those of nitrate in press hams were decreased while those of nitrite were increased during its cooking process. Their contents in sausage products were 1.8 and 0.9 mg/kg; those of nitrate were decreased, while nitrite were slightly increased during its cooking process. NDMA detected only NA in all the collected cured products. Changes of NDMA, regardless of cooking methods, tend to drastically increase in all samples after their cooking; Its contents were increased by average 6.0~70.7 times in the GR samples, by average 2.4~39.2 times in the ER samples and by average 7.0~56.3 times in the BE samples. Virtually, the fact that all of this nitrosamine appeared to arise by the action of precursor such as NOx was produced during the cooking of cured products.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.197-208
• /
• 2003

This paper is to determine the possibility of re-using waste concrete from Incheon city area. The strength test was conducted with five aggregate compounds which was replaced a natural aggregate with recycled aggregate. After checking the physical characteristics of recycled aggregate compounds, the mix design of recycled concrete was conducted. For the relatively comparison between natural and recycled compounds, while the unit aggregate weight was changed, other conditions were fixed. The freezing and thawing test which included fly-ash and super-plastezer were performed to check the durability and workability when recycling waste concrete. In the physical characteristics of recycled aggregate, it was found that the specific gravity of recycled coarse aggregate and recycled fine aggregate satisfied the first grade of recycle specification(KS), and all compounds of recycled aggregate also satisfied the second grade of absorption specification, Especially up to the 50% substitution of recycled aggregate is equal to or a bit lower than that of convention aggregate. In comparison with conventional concrete, the recycled concrete is lower than maximum by 7% in compressive strength decreasing rate after freezing-thawing test. From now, although most of recycled concrete was used to the building lot, subgrade, asphalt admixture, through the result. It was proved that possibility of re-using recycled aggregate as the substructure of bridge, retaining wall, tunnel lining and concrete structure which is not attacked the drying shrinkage severely.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.257-263
• /
• 2019

Lightweight geopolymers were fabricated with non-milled IGCC slag and Si sludge as a bloating material. The relationship between addition amount of Si sludge and physical/chemical properties of lightweight geopolymers was investigated. When the geopolymers were made by mixing IGCC slag, alkali activator, and more than 10 wt.% Si sludge, the temperature of the geopolymer pastes reached higher than 130℃ in a few minutes. This exothermic reaction accelerated the geopolymer reaction; however, it was difficult to make geopolymer specimens because of a rapid bloating reaction. Both compressive strength and density of the specimens tend to decrease with an addition of Si sludge; however, there was little difference in both compressive strength and density with addition of Si sludge more than 10 wt.%. Because there was a limit to get low density geopolymers by simply increasing the addition of Si sludge, the control of pore size and distribution of geopolymer is more important by controlling flow rate of the paste through the control of W/S ratio. Therefore, it is important to control process conditions, appropriate W/S ratio for the bloating than the control of Si sludge. The optimum W/S ratio was 0.20 for the addition of Si sludge less than 30 wt.% and W/S ratio should be more than 0.28 for the addition of Si sludge more than 30 wt.%, although there was no practical application in fact.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.352-358
• /
• 2019

In recent years, printing paper with a function of information delivery and aesthetic value has attracted a great attention with increasing market demand for coated paper that is capable of high quality printing. The coated paper for inkjet printing with high-quality of photorealistic grades requires the coating layer with a good wettability and porous surface structure in order to improve the printability of ink. In this study, the coated paper was prepared using polyvinyl alcohol (PVA) and surface treated nano silica sol with silane coupling agent. It was confirmed that the coating layer with surface treated nano silica sol showed a uniform pore distribution and flat surface roughness. Glossiness of the prepared printing paper was similar to that of commercial high quality photo paper. Especially, the coated paper with surface treated nano silica sol showed improved printability with excellent roundness of the printed dot of ink. These results indicates that the coating layer with excellent wettability and uniform pore distribution can be formed by using the nano-silica particles with improved dispersibility through the surface treatment of the silane coupling agent.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.41-52
• /
• 2005

Because the allowable current loading of buried electrical transmission cables is frequently limited by the maximum permissible temperature of the cable or of the surrounding ground, there is a need fur cable backfill materials that can maintain a low thermal resistivity even while subjected to high temperatures for prolonged periods. Temperatures greater than $50^{\circ}C\;to\;60^{\circ}C$ may lead to breakdown of cable insulation and thermal runaway if the surrounding backfill material is unable to dissipate the heat as rapidly as it is generated. This paper describes the results of studies aimed at the development of backfill material to reduce the thermal resistivity. A large number of different additive materials were tested to determine their applicability as a substitute material. Tests were carried out for Dongrim river sand, a relatively uniform sand of very high thermal resistivity, $50^{\circ}C-cm/watt\;at\;10\%$ water content, $260^{\circ}C-cnuwatt$ when dry, and Jinsan granite screenings, and D-2 (sand and granite screenings mixture), E-1 (rubble and granite screenings mixture), a well-graded materials with low thermal resistivity, about $35^{\circ}C-cm/watt$ when at 10 percent water content, $100^{\circ}C-cm/watt$ when dry. Based on this research, 3 types of backfill materials were suggested for improved materials with low thermal resistivity and the applicability was assessed through field tests.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.601-606
• /
• 2009

Amelogenesis Imperfecta (AI) is a genetic disorder which retards the development of enamel and it can be classified into three types: hypoplastic, hypomaturation, hypocalcified type. This can occur both in deciduous and permanent dentition. A 8 year 8 month old patient with a chief complaints of delayed eruption on upper anteriors, calculus deposit on lower anteriors and anterior openbite visited the clinic. Anteriors had thin layer of enamel and were very narrow. Especially lower anteriors had rough surface and were in bad shape. Teeth were very hypersensitive to thermal changes. Upper and lower first molars showed severe attrition on the occlusal surface. Radiographs also verified hypoplastic enamel in the whole dentition including the teeth in the tooth bud. The patient was diagnosed as hypoplastic AI, and is being treated at the pediathc and prosthodontic department of the Kyunghee dental university hospital. To improve the function, esthetics, hypersensitivity of the AI patients, restorations on the posteriors and the anteriors with oral hygiene instruction are necessary, Constant follow-up check is needed until full growth and after full growth, cooperative care with the other department is needed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.508-513
• /
• 2000

In an attempt to evaluate the fertilizer of sediments obtained from coastal farming areas, chemical composition, bacteriological quality and heavy metals in the sediments alkalized by quicklime and magnesium hydroxide were analyzed. The optimum conditions of alkalization were also measured. A perfect reaction was possible by the addition of quicklime of $30{\%}$ at the rate of $25{\%}$ of sediment and $100{\%}$ of livestock wastes. According to the classification standard for compost constituent by Higgins, all composts had the intermediate or high grade in $T-N, K_2O,\;CaO\;and\;MgO$, but below the low grade in $P_2O_5$, Stabilization by quicklime and magnesium hydroxide has been known to inhibit bacterial decomposition of organic matter and activity of pathogenic organisms. In this study, raising pH of stabilized sediments to 12 for 2 hours (PSRP rriteria of EPA) allowed $99.9{\%}$ of coliform group, fecal group and viable cell count to be reduced. As a result, sediments of coastal farming areas are likely to be used to produce the organic fertilizer by alkaline stabilization.