• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.113-115
• /
• 2002

Two experiments were conducted to compare the effects of the natural and the synthetic commercial pigments on the laying performance, pigmentation and fatty acid contents in egg Yolk of laying hens. Feed intake, egg production, egg weight and feed efficiency did not have significant difference(p〈0.05) in experiments I and II. White height and haugh unit did not have significant difference(p〈0.05) in two experiments. In order to approach the yolk pigmentation to 12∼13 of Roche color fan, addition level of natural red pigment was 25∼30 ppm. In the case of synthetic red pigment, the level was 15∼20 ppm. In this experimental condition, the pigmenting effect of the synthetic pigment had better than that of the natural pigment. In the experiment 2, the Pigmenting effect of mixing Pigments were inveatigated between TM2 mixed with natural red pigment, and TM6 mixed with synthesis red pigment. The fatty acid content in yolk was not affected by pigment addition.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.129-135
• /
• 2007

The critical micelle concentrations (CMC) and the counter ion binding constants (B) in a micellar state of the mixed surfactant systems of Tetradecyltrimethylammonium bromide (TTAB) with Polyoxyethylene(23) lauryl ether (Brij 35) in water were determined as a function of α1 (the overall mole fraction of TTAB) by the use of electric conductivity method and surface tensiometer method from 15 oC to 35 oC. Values of thermodynamic parameters (ΔGom, ΔHom, and ΔSom) for the micellization of TTAB/Brij 35 mixtures were calculated and analyzed from the temperature dependence of CMC values. The results say that the measured values of ΔGom are all negative at the whole measured condition but the values of ΔSom and ΔHom are positive or negative, depending on the measured temperature and α1.

• Clean Technology
• /
• v.21 no.2
• /
• pp.124-129
• /
• 2015

The constant-volume method was used to determine the solubility of CO₂ in various physical absorbents such as DMPEG (dimethyl ether of polyethylene glycol), DEC (diethyl carbonate), DMC (dimethyl carbonate), and TAT (triacetin) in the total pressure range from 5 to 30 bar. The Peng-Robinson equation of state has been used to describe the equilibrium behavior of these mixtures. It was found that the solubility of absorbents was in the of DMPEG250 > TAT > DEC > DMC at the same temperature. Futhermore, the solubiity of blended absorbent of DMPEG250 and DEC is higher than that of DMPEG 250 alone. Therefore, blended absorbent of DMPEG250 and DEC is expected to be an effective and low cost absorbent for physical absorption in precombustion CO₂ capture.

• Conservation Science in Museum
• /
• v.21
• /
• pp.1-16
• /
• 2019

This study investigated the material properties of UV-curable Resin in order to identify stable materials for use in the restoration of glass cultural properties. Tested samples were based on acrylic UV-curable Resin (SECURE CP-7321®), to which urethane UV-curable Resin (FLGPCL04 Clear®) was added in 10% increments to produce eleven samples. The results showed that all eleven samples had similar properties in terms of refractive index, density, adhesive strength, and anti-yellowing. But the surface hardness and compressive strength were optimal and effective for maintaining the shape of artifacts after restoration treatment when the proportion of urethane resin was in the range of 10-20%. Based on these findings, the mixing sample [acrylic UV-curable Resin(9) : urethane UV-curable Resin(1)] was applied in the conservation treatment of a glass cultural propertie (Hwangbuk 519) excavated from the North Mound of Hwangnamdaechong, Tomb in Gyeongju.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.46-51
• /
• 2011

An extraction study of neodymium (Nd) was investigated with different individual and mixer of extractants such as PC88A, D2EHPA, Cyanex 272, Versatic acid 10 and D2EHPA+Alamine-304-1, D2EHPA+Alamine-308, D2EHPA+TBP, D2EHPA+TOPO, PC88A+Alamine-336 and PC88A+TBP respectively. In all cases, it was observed that the extraction percentage of Nd increased with increasing equilibrium pH and extractant concentration but rather opposite observation was found that the extraction percentage of Nd decreased with increasing TBP concentration along with D2EHPA. Adding TBP to PC88A had no favorable effect on the extraction of Nd, whereas use of a mixture of PC88A with Alamine336, increased the extraction percentage of Nd under the same condition. Based on our experimental studies, this paper reports the results on the basic approach and extraction of neodymium.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.1
• /
• pp.20-26
• /
• 2014

Interest in renewable fuel of recent has increased. Among them, From next year the government announced that it would enforce the RFS. Interest associated with it are concentrated. The RFS, for manufacturers of transportation fuels such as a vehicle, you are a renewable fuel a certain percentage of the fuel supplied. In other words, it refers to a system of mandatory to supply by mixing biofuels. Already in Europe, America and other developed countries to diversify energy sources and subjected Additionally there since ancient times for its rural development by introducing the RFS takes effect coming. Further and inspect to deal with climate change, which is performed via the RFS. Some even are represented by five axis of the sustainability of the RFS.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.190-195
• /
• 2006

The critical micelle concentrations (CMC) and the counter ion binding constants (B) in a micellar state of the mixed surfactant systems of sodium dodecylbenzenesulfonate (DBS) with polyoxyethylene(4) lauryl ether (Brij 30) in water were determined as a function of 1 (the overall mole fraction of DBS) by the use of electric conductivity method and surface tensiometer method from 288 K to 308 K. Various thermodynamic parameters (Smo, Hmo, and Gmo) for the micellization of DBS/Brij 30 mixtures were calculated and analyzed from the temperature dependence of CMC values. The measured values of Gomare all negative but the values of Smo are positive in the whole measured temperature region. On the other hand, the values of Hmo are positive or negative, depending on the measured temperature and 1.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.111-116
• /
• 2009

Juvenile hormone (JH) is an insect hormone mediating immature metamorphosis and adult reproduction. It also mediates immune responses to suppress hemocyte behavior, which is, however, activated by ecdysteroid. This study investigated an effect of a commercial pyriproxyfen (a JH agonist) formulation on a cellular immune response of the diamondback moth, Plutella xylostella, and analysed its mixture with Bacillus thuringiensis (Bt) in insecticidal potency. The commercial pyriproxyfen formulation significantly suppressed hemocyte-spreading behavior at low doses as did in pyriproxyfen technical grade. When the commercial pyriproxyfen formulation was mixed with Bt, Bt toxicity was significantly increased against P. xylostella larvae in laboratory. The mixture effect was then confirmed in field cultivating cabbage infested with P. xylostella larvae. The mixture showed a significantly enhanced mortality and reduced effective lethal time, compared to only Bt treatment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.05a
• /
• pp.119-123
• /
• 1995

우리 나라에서 고체추진기관에 대하여 관심을 갖고 연구를 시작한 것은 1970년대 중반 국방과학연구소를 중심으로 이루어 졌으며, 그후 추진기관의 설계와 제조분야에서 괄목할만한 기술축적을 이루어 왔다. 고체추진제 그레인의 성형기술도 이에 발맞추어 상당한 기술발전이 있었다. 앞으로 우리 나라도 우주산업 진출이 가시화 되고 있으며 이에 따른 우주발사체 추진제 성형기술도 선진국 수준의 기술 개발이 요구되는 실정이다. 본 논문에서는 추진기관 제조 기술중 중요한 기술인 고체 추진제 그레인 성형용 코아 설계를 중심으로한 그 동안의 개발내용과 향후 발전 방향에 대하여 기술하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.735-742
• /
• 2012

This study tried to find a suitable method for enhancing the foam stability of cationic surfactants that normally generate less foam or no foam. Several trials were made to enhance the foam stability: addition of anionic surfactant, colloids and polymer. Cationic starch (CA-ST) did not form foam at all, while the foam stability of two other cationic surfactant also showed low levels; methyl triethanol ammonium methyl sulfate distearyl ester (CEQ90) for 46 sec. and Cetyl trimethyl ammonium chloride (CM29) for 31 seconds. Foam stability of cationic surfactants were significantly affected by addition of anionic surfactant, sodium dodecyl sulfate (SDS). Foam stability of CA-ST was significantly enhanced by addition of SDS, while those of CEQ90 and CM29 were decreased. Addition of colloids ($SiO_2$, kaolin) and polyvinyl alcohol (PVA) enhanced foam stabilities of CEQ90 and CM29. However, CA-ST did not form foam even in the presence of colloids or PVA. Effect of simultaneous addition of colloids and anionic surfactant on foam stability of cationic surfactant showed that foam stability of cationic surfactant was more influenced by addition of anionic surfactant than colloids. Effect of simultaneous addition of PVA and anionic surfactant on the foam stability of cationic surfactant also showed that presence of anionic surfactant significantly affect the foam stability of cationic surfactant. Foam stability of CA-ST was greatly increased to 8,780 seconds by addition of SDS 0.14% and PVA 2.5%. The foam stability of CA-ST was 8 times higher than CEQ 90. This study suggested that cationic surfactants not forming foam can generate foam by addition of anionic surfactant and its stability can be additionally increased by addition of colloids and PVA. The study results showed that enhancement in foam stability of cationic surfactant was prominently affected by the concentration of anionic surfactant added.