• Membrane Journal
• /
• v.11 no.4
• /
• pp.161-169
• /
• 2001

Single and mixed particle suspensions of kaolin, bentonite, starch and PMMA were carried out using a dead-end Amicon fi1tration cell with microfilteration membranes. The experimental data of permeate fluxes were fitted by the constant pressure fi1tration models in order to investigate fouling steps. In 0.1 wt% mixed solution of equal amount of kaolin and starch, the permeation flux was about 30% lower than the average of each particle flux. However, the permeation flux for kaolin/PMMA mixed solution was about 10% higher than the average of each particle flux. In the cases of bentonite and PMMA or starch mired solution, the improvement effect on permeation flux was weaken than that of kaolin mixed solution. Also, the membrane fouling resistance for mixed particle solution of equal amount of kaolin and starch was minimum at 0.05 wt% particle concentration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.274-280
• /
• 2005

Experimental investigations were carried out in an atmospheric pressure, optically accessible and laboratory-scale dump combustor. The objective of this study is to obtain the phase-resolved gas temperatures at different phases of the oscillating pressure cycle during unstable combustion. To see the effect of incomplete fuel-air mixing on phase-resolved temperature characteristics, CARS temperature measurements were performed. Results including phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs) were provided in this paper. It could be found that the profile of mean temperature showed the in-phase relationship with pressure cycle. Temperature PDFs give an insight on the flame behavior as well as NOx emission characteristics. These results would be expected to play an important role in better understanding of driving mechanisms and thermo-acoustic interactions.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1502-1504
• /
• 2006

본 연구는 $SF_6$와 Dry-air(건조공기)가 혼합된 절연매체의 절연 특성과 부분방전 특성 연구를 위하여 기초실험용 쳄버와 70kV급 GIS mock up 을 이용하여 교류전압을 인가하여 실험이 수행되었다. 전자의 경우, Sphere gap 및 Needle/Plate 전극시스템을 이용하여 순수 $SF_6$가스와 Dry-air의 절연내력을 비교하고, 챔버의 압력을 5기압으로 유지한 상태에서 Dry-air와 $SF_6$가스의 혼합비를 변화시키면서 절연내력이 측정되었다. 후자의 경우, 기초실험에서 도출된 $SF_6$가스와 Dry-air의 최적의 혼합비율을 선택한 후, 방전 개시전압과 부분방전 양상을 순수 $SF_6$가스의 결과와 비교 분석하기 위한 실험을 수행하였다. 이를 위하여 GIS 사고의 주요원인이 되는 결함들, 즉 Protrusion, Floating, Free moving particle 들을 인위적으로 모의하여 Mock up 내부에 설치하고 내부 압력을 5기압으로 유지한 상태에서 수행되었다. 전자의 경우, $0.5{\sim}5$ 기압 범위내 에서 Dry-air 압력을 변화시켰을 때 절연내력은 전극시스템에 무관하게 순수 $SF_6$가스의 결과치의 $40{\sim}50%$정도이다. 또한 챔버 압력이 5기압일 경우, Needle/Plate 전극을 이용했을 경우, Dry-air 가 80% 혼합된 절연매체는 순수 $SF_6$가스 절연내력의 80%정도이다. 후자의 경우, 인가전압을 고정 시켰을 때, 부분방전 패턴과 방전크기는, 순수 $SF_6$가스와 Dry-air 가 80% 혼합된 절연매체는 동일한 패턴과 방전크기를 나타내고 있다. 이러한 결과를 근거로, 가스 압력이 5기압에서 운전되는 전력기기의 절연 매체로서 혼합가스를 사용할 경우, $SF_6$가스와 Dry-air의 혼합비는 2:8정도가 적절한 것으로 제안한다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.139-141
• /
• 2003

Disease severity, percent ripened grains, and yield were investigated in the seven mixtures by using near-isogenic lines having different resistant gene(s) to bacterial blight(BB) of rice. The seven mixtures including the four pure stands were inoculated with a 1:1:1 mixture of races $K_1$, $K_2$, and $K_3$ of BB. Among the seven mixtures-ML01, ML02, ML03, MLl2, MLl3, ML23 and ML0123-, disease severiety, percent ripened grains, and yield of ML01 and ML12, respectively did not show significant difference with those of mean values of their components. But degree of disease severity of the other mixtures, respectively -ML02, ML03, MLl3, ML23, and ML0123-was less than the mean of their components. Percent ripened grains and yield of them were higher than those of mean of their components. ML03, MLl3, ML23 and ML0123 comprised of the equal amount of two or four components having different resistant gene, these mixtures appeared to be a desirable combination for delaying spread of the pathogen, stabilizing of the race structure of the pathogen population, and extending durability of a cultivar with monogenic resistance.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.6
• /
• pp.53-62
• /
• 2013

A 5-20 cm thick shocrete has been routinely constructed for NATM tunneling method to stabilize and confine the excavated rock of tunnel construction site. A $40kg/m^3$ of steel fibers are usually mixed into such shotcrete but these steel fibers may not be evenly distributed depending on shotcrete machines, mixing ratios and excavated rock conditions. In this study, square column shotcrete-mimicked concrete specimens of $15cm{\times}15cm{\times}55cm$ were prepared with 5 equal layers and 5 or 20% cement ratio. The specimens were prepared with different reinforced-patterns: non-reinforced, middle layer-reinforced, 1, 3, and 5 layers-reinforced, or all layers reinforced. The specimens were air-cured for 7 days and tested for flexural strength. The influence of steel-fiber distribution on flexural strength and toughness of shotcrete-mimicked concrete specimens was investigated. In the case of a specimen with cement ratio of 20%, a flexural strength increased as a number of fiber-reinforced layer increased. The flexural strength of one-layer reinforced specimen showed 20% less than that of evenly fiber-distributed specimen. On the other hand, a specimen with cement ratio of 5% decreased as the number of fiber-reinforced layers increased. A toughness index increased as the number of fiber-reinforced layers increased, regardless of cement ratios. The toughness index of evenly fiber-distributed specimen showed 2-3 times as large as that of one-layer reinforced specimen.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.82-91
• /
• 2003

Experiments to investigate the mixing performance of unlike doublet impinging jets are conducted. Reynolds number of simulants used in this study rages from 1.0 to 1.5 Cold flow test is performed to investigate the hydrodynamic effect and spray of the impinging jets are collected locally and calculated by using Rupe's mixing efficiency equation. Momentum exchanges and relative velocity ratio between two jets are taken as the main parameter to represent the effect of enlargement of the orifice diameter. As diameter ratio increases, the corresponding momentum ratio where maximum mixing efficiency occurs and relative velocity at the maximum mixing efficiency ranges 0.6 to 0.7, respectively. Penetration depth can be taken as a prominent parameter to estimate the mixing efficiency.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.503-504
• /
• 1986

The characteristics of packsulki (Korean traditional rice cake) which was sweetened with sucrose or combined sweeteners (sorbitol plus aspartame or sorbitol plus saccharin) were investigated through sensory evaluation in this study. The sensory attributes of packsulkis containing combined sweeteners were evaluated as being similar to those of packsulki containing sucrose. There were no significant differences among the groups in most of the properties.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.121-138
• /
• 1995

The Langmuir competitive model and the IAS(ideal adsorption solution) model were eveluated and compared in a multisolute adsorption study using five organic compounds (phenol, 2, 4-dichlorophenol, 2, 4, 6-trichlorophenot brucine, and thiourea) and two soils. The chemicals were evaluated individually and in mixtures. In general, the IfS model predicted the equilibrium concentration of a chemical in a mixture better than the Langmuir model. The Langmuir model underestimated the sorption of phenol when the concentration of another compound in a mixture with phenol was high. Neither of the models predicted satisfactorily the equilibrium concentration of thiourea in the mixtures. Thiourea is an aliphatic compound while the other four chemicals are aromatic compounds.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3264-3269
• /
• 2007

Combustion instability is a serious obstacle for the lean premixed combustion of gas turbines, and can even cause fatal damage to the combustor and the entire system. Thus, improved understanding of the mechanisms of combustion instability is necessary for designing and operating gas turbine combustors. In this study, in order to understand the instability phenomena, an experimental study was conducted in a rearwardstep dump combustor with LPG and air. The fluctuations of pressure and heat release were measured by piezoelectric pressure sensor and High speed Intensified Charge Coupled Device (ICCD) camera respectively. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The unmixedness of the fuel and air can be controlled by changing the mixing distance ($L_{fuel}$). It is found that the unmixedness of the fuel and air affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.125-134
• /
• 2000

지반이 산업용 기름으로 오염될 때 지반의 강도변화 특성을 연구하기 위하여 모래와 실트질 모래 및 카오리나이트를 대상으로 함수비아 함유비를 변화시키며 다짐실험, 투수실험, 비배수상태에서 삼축압축실험을 실시하였다. 실험결과에 의하면 밀도가 같은 모래의 경우는 기름을 혼합하였을 경우가 물을 혼합하였을 경우에 비해 약 7%정도 전단 강도가 떨어지고 실트질 모래와 카오리나이트 경우는 기름을 혼합하였을 경우가 물을 혼합하였을 경우에 비해 점토입자와 기름의 화학적, 물리학적인 상호 작용으로 5~15%정도 강도가 증가하는 현상을 보였다. 일반적으로 산업용 기름 유출에 따라 토양오염 및 수질오염으로 동.식물에 큰 영향을 주고 있으나 토질역학적 거동은 초기 상태 및 모래에서는 전단 강도가 감소하였으나 점성토의 경우는 기름 유출 또는 유입에 따라 응집성, 부착성이 생겨 강도증가 현상을 가져와 큰 문제점이 없는 것으로 판단된다.